linux.git/drivers/base, branch v4.9.113

PM / OPP: Update voltage in case freq == old_freq

2018-07-11T14:26:45+00:00

commit c5c2a97b3ac7d1ec19e7cff9e38caca6afefc3de upstream.

This commit fixes a rare but possible case when the clk rate is updated
without update of the regulator voltage.

At boot up, CPUfreq checks if the system is running at the right freq. This
is a sanity check in case a bootloader set clk rate that is outside of freq
table present with cpufreq core. In such cases system can be unstable so
better to change it to a freq that is preset in freq-table.

The CPUfreq takes next freq that is >= policy->cur and this is our
target_freq that needs to be set now.

dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
old_freq (a current rate). If these are equal it returns early. If not,
it searches for OPP (old_opp) that fits best to old_freq (not listed in
the table) and updates old_freq (!).

Here, we can end up with old_freq = old_opp.rate = target_freq, which
is not handled in _generic_set_opp_regulator(). It's supposed to update
voltage only when freq > old_freq  || freq > old_freq.

if (freq > old_freq) {
		ret = _set_opp_voltage(dev, reg, new_supply);
[...]
if (freq < old_freq) {
		ret = _set_opp_voltage(dev, reg, new_supply);
		if (ret)

It results in, no voltage update while clk rate is updated.

Example:
freq-table = {
	1000MHz   1.15V
	 666MHZ   1.10V
	 333MHz   1.05V
}
boot-up-freq        = 800MHz   # not listed in freq-table
freq = target_freq  = 1GHz
old_freq            = 800Mhz
old_opp = _find_freq_ceil(opp_table, &old_freq);  #(old_freq is modified!)
old_freq            = 1GHz

Fixes: 6a0712f6f199 ("PM / OPP: Add dev_pm_opp_set_rate()")
Cc: 4.6+  # v4.6+
Signed-off-by: Waldemar Rymarkiewicz 
Signed-off-by: Viresh Kumar 
Signed-off-by: Greg Kroah-Hartman

driver core: Don't ignore class_dir_create_and_add() failure.

2018-06-26T00:08:07+00:00

commit 84d0c27d6233a9ba0578b20f5a09701eb66cee42 upstream.

syzbot is hitting WARN() at kernfs_add_one() [1].
This is because kernfs_create_link() is confused by previous device_add()
call which continued without setting dev->kobj.parent field when
get_device_parent() failed by memory allocation fault injection.
Fix this by propagating the error from class_dir_create_and_add() to
the calllers of get_device_parent().

[1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de6529116f

Signed-off-by: Tetsuo Handa 
Reported-by: syzbot 
Cc: Greg Kroah-Hartman 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

regmap: Correct comparison in regmap_cached

2018-05-30T05:50:51+00:00

[ Upstream commit 71df179363a5a733a8932e9afb869760d7559383 ]

The cache pointer points to the actual memory used by the cache, as the
comparison here is looking for the type of the cache it should check
against cache_type.

Fixes: 1ea975cf1ef5 ("regmap: Add a function to check if a regmap register is cached")
Signed-off-by: Charles Keepax 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

x86/bugs: Expose /sys/../spec_store_bypass

2018-05-22T14:57:59+00:00

commit c456442cd3a59eeb1d60293c26cbe2ff2c4e42cf upstream

Add the sysfs file for the new vulerability. It does not do much except
show the words 'Vulnerable' for recent x86 cores.

Intel cores prior to family 6 are known not to be vulnerable, and so are
some Atoms and some Xeon Phi.

It assumes that older Cyrix, Centaur, etc. cores are immune.

Signed-off-by: Konrad Rzeszutek Wilk 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Borislav Petkov 
Reviewed-by: Ingo Molnar 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman

regmap: Fix reversed bounds check in regmap_raw_write()

2018-04-24T07:34:10+00:00

commit f00e71091ab92eba52122332586c6ecaa9cd1a56 upstream.

We're supposed to be checking that "val_len" is not too large but
instead we check if it is smaller than the max.

The only function affected would be regmap_i2c_smbus_i2c_write() in
drivers/base/regmap/regmap-i2c.c.  Strangely that function has its own
limit check which returns an error if (count >= I2C_SMBUS_BLOCK_MAX) so
it doesn't look like it has ever been able to do anything except return
an error.

Fixes: c335931ed9d2 ("regmap: Add raw_write/read checks for max_raw_write/read sizes")
Signed-off-by: Dan Carpenter 
Signed-off-by: Mark Brown 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

drivers: base: cacheinfo: fix boot error message when acpi is enabled

2018-01-31T11:55:51+00:00

commit 55877ef45fbd7f975d078426866b7d1a2435dcc3 upstream.

ARM64 enables both CONFIG_OF and CONFIG_ACPI and the firmware can pass
both ACPI tables and the device tree. Based on the kernel parameter, one
of the two will be chosen. If acpi is enabled, then device tree is not
unflattened.

Currently ARM64 platforms report:
"
	Failed to find cpu0 device node
	Unable to detect cache hierarchy from DT for CPU 0
"
which is incorrect when booting with ACPI. Also latest ACPI v6.1 has no
support for cache properties/hierarchy.

This patch adds check for unflattened device tree and also returns as
"not supported" if ACPI is runtime enabled.

It also removes the reference to DT from the error message as the cache
hierarchy can be detected from the firmware(OF/DT/ACPI)

Cc: Greg Kroah-Hartman 
Signed-off-by: Sudeep Holla 
Signed-off-by: Mian Yousaf Kaukab 
Signed-off-by: Greg Kroah-Hartman

drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled

2018-01-31T11:55:51+00:00

commit fac51482577d5e05bbb0efa8d602a3c2111098bf upstream.

With CONFIG_OF enabled on x86, we get the following error on boot:
"
	Failed to find cpu0 device node
 	Unable to detect cache hierarchy from DT for CPU 0
"
and the cacheinfo fails to get populated in the corresponding sysfs
entries. This is because cache_setup_of_node looks for of_node for
setting up the shared cpu_map without checking that it's already
populated in the architecture specific callback.

In order to indicate that the shared cpu_map is already populated, this
patch introduces a boolean `cpu_map_populated` in struct cpu_cacheinfo
that can be used by the generic code to skip cache_shared_cpu_map_setup.

This patch also sets that boolean for x86.

Cc: Greg Kroah-Hartman 
Signed-off-by: Sudeep Holla 
Signed-off-by: Mian Yousaf Kaukab 
Signed-off-by: Greg Kroah-Hartman

sysfs/cpu: Add vulnerability folder

2018-01-17T08:38:57+00:00

commit 87590ce6e373d1a5401f6539f0c59ef92dd924a9 upstream.

As the meltdown/spectre problem affects several CPU architectures, it makes
sense to have common way to express whether a system is affected by a
particular vulnerability or not. If affected the way to express the
mitigation should be common as well.

Create /sys/devices/system/cpu/vulnerabilities folder and files for
meltdown, spectre_v1 and spectre_v2.

Allow architectures to override the show function.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Konrad Rzeszutek Wilk 
Cc: Peter Zijlstra 
Cc: Will Deacon 
Cc: Dave Hansen 
Cc: Linus Torvalds 
Cc: Borislav Petkov 
Cc: David Woodhouse 
Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de
Signed-off-by: Greg Kroah-Hartman

PM / OPP: Move error message to debug level

2017-12-25T13:23:44+00:00

[ Upstream commit 035ed07208dc501d023873447113f3f178592156 ]

On some i.MX6 platforms which do not have speed grading
check, opp table will not be created in platform code,
so cpufreq driver prints the following error message:

cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19)

However, this is not really an error in this case because the
imx6q-cpufreq driver first calls dev_pm_opp_get_opp_count()
and if it fails, it means that platform code does not provide
OPP and then dev_pm_opp_of_add_table() will be called.

In order to avoid such confusing error message, move it to
debug level.

It is up to the caller of dev_pm_opp_get_opp_count() to check its
return value and decide if it will print an error or not.

Signed-off-by: Fabio Estevam 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

isa: Prevent NULL dereference in isa_bus driver callbacks

2017-12-14T08:28:11+00:00

commit 5a244727f428a06634f22bb890e78024ab0c89f3 upstream.

The isa_driver structure for an isa_bus device is stored in the device
platform_data member of the respective device structure. This
platform_data member may be reset to NULL if isa_driver match callback
for the device fails, indicating a device unsupported by the ISA driver.

This patch fixes a possible NULL pointer dereference if one of the
isa_driver callbacks to attempted for an unsupported device. This error
should not occur in practice since ISA devices are typically manually
configured and loaded by the users, but we may as well prevent this
error from popping up for the 0day testers.

Fixes: a5117ba7da37 ("[PATCH] Driver model: add ISA bus")
Signed-off-by: William Breathitt Gray 
Acked-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman