<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/block, branch v4.9.281</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>virtio-blk: Fix memory leak among suspend/resume procedure</title>
<updated>2021-07-20T14:21:14+00:00</updated>
<author>
<name>Xie Yongji</name>
<email>xieyongji@bytedance.com</email>
</author>
<published>2021-05-17T08:43:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=102d6bc6475ab09bab579c18704e6cf8d898e93c'/>
<id>102d6bc6475ab09bab579c18704e6cf8d898e93c</id>
<content type='text'>
[ Upstream commit b71ba22e7c6c6b279c66f53ee7818709774efa1f ]

The vblk-&gt;vqs should be freed before we call init_vqs()
in virtblk_restore().

Signed-off-by: Xie Yongji &lt;xieyongji@bytedance.com&gt;
Link: https://lore.kernel.org/r/20210517084332.280-1-xieyongji@bytedance.com
Acked-by: Jason Wang &lt;jasowang@redhat.com&gt;
Signed-off-by: Michael S. Tsirkin &lt;mst@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit b71ba22e7c6c6b279c66f53ee7818709774efa1f ]

The vblk-&gt;vqs should be freed before we call init_vqs()
in virtblk_restore().

Signed-off-by: Xie Yongji &lt;xieyongji@bytedance.com&gt;
Link: https://lore.kernel.org/r/20210517084332.280-1-xieyongji@bytedance.com
Acked-by: Jason Wang &lt;jasowang@redhat.com&gt;
Signed-off-by: Michael S. Tsirkin &lt;mst@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>xen-blkback: don't leak persistent grants from xen_blkbk_map()</title>
<updated>2021-03-30T12:41:43+00:00</updated>
<author>
<name>Jan Beulich</name>
<email>jbeulich@suse.com</email>
</author>
<published>2021-03-26T15:28:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=3cb86952ce3c8b28a0c1f3ce82848618d8628015'/>
<id>3cb86952ce3c8b28a0c1f3ce82848618d8628015</id>
<content type='text'>
commit a846738f8c3788d846ed1f587270d2f2e3d32432 upstream.

The fix for XSA-365 zapped too many of the -&gt;persistent_gnt[] entries.
Ones successfully obtained should not be overwritten, but instead left
for xen_blkbk_unmap_prepare() to pick up and put.

This is XSA-371.

Signed-off-by: Jan Beulich &lt;jbeulich@suse.com&gt;
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross &lt;jgross@suse.com&gt;
Reviewed-by: Wei Liu &lt;wl@xen.org&gt;
Signed-off-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a846738f8c3788d846ed1f587270d2f2e3d32432 upstream.

The fix for XSA-365 zapped too many of the -&gt;persistent_gnt[] entries.
Ones successfully obtained should not be overwritten, but instead left
for xen_blkbk_unmap_prepare() to pick up and put.

This is XSA-371.

Signed-off-by: Jan Beulich &lt;jbeulich@suse.com&gt;
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross &lt;jgross@suse.com&gt;
Reviewed-by: Wei Liu &lt;wl@xen.org&gt;
Signed-off-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>block: rsxx: fix error return code of rsxx_pci_probe()</title>
<updated>2021-03-17T15:10:18+00:00</updated>
<author>
<name>Jia-Ju Bai</name>
<email>baijiaju1990@gmail.com</email>
</author>
<published>2021-03-10T03:30:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=490d393a949b40a38077030b7469ed3b7ea154e5'/>
<id>490d393a949b40a38077030b7469ed3b7ea154e5</id>
<content type='text'>
[ Upstream commit df66617bfe87487190a60783d26175b65d2502ce ]

When create_singlethread_workqueue returns NULL to card-&gt;event_wq, no
error return code of rsxx_pci_probe() is assigned.

To fix this bug, st is assigned with -ENOMEM in this case.

Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver")
Reported-by: TOTE Robot &lt;oslab@tsinghua.edu.cn&gt;
Signed-off-by: Jia-Ju Bai &lt;baijiaju1990@gmail.com&gt;
Link: https://lore.kernel.org/r/20210310033017.4023-1-baijiaju1990@gmail.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit df66617bfe87487190a60783d26175b65d2502ce ]

When create_singlethread_workqueue returns NULL to card-&gt;event_wq, no
error return code of rsxx_pci_probe() is assigned.

To fix this bug, st is assigned with -ENOMEM in this case.

Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver")
Reported-by: TOTE Robot &lt;oslab@tsinghua.edu.cn&gt;
Signed-off-by: Jia-Ju Bai &lt;baijiaju1990@gmail.com&gt;
Link: https://lore.kernel.org/r/20210310033017.4023-1-baijiaju1990@gmail.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rsxx: Return -EFAULT if copy_to_user() fails</title>
<updated>2021-03-11T12:48:03+00:00</updated>
<author>
<name>Dan Carpenter</name>
<email>dan.carpenter@oracle.com</email>
</author>
<published>2021-03-03T10:59:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=b2caacb95a00251ef586dac134b8614ddde7565d'/>
<id>b2caacb95a00251ef586dac134b8614ddde7565d</id>
<content type='text'>
[ Upstream commit 77516d25f54912a7baedeeac1b1b828b6f285152 ]

The copy_to_user() function returns the number of bytes remaining but
we want to return -EFAULT to the user if it can't complete the copy.
The "st" variable only holds zero on success or negative error codes on
failure so the type should be int.

Fixes: 36f988e978f8 ("rsxx: Adding in debugfs entries.")
Signed-off-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 77516d25f54912a7baedeeac1b1b828b6f285152 ]

The copy_to_user() function returns the number of bytes remaining but
we want to return -EFAULT to the user if it can't complete the copy.
The "st" variable only holds zero on success or negative error codes on
failure so the type should be int.

Fixes: 36f988e978f8 ("rsxx: Adding in debugfs entries.")
Signed-off-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>zsmalloc: account the number of compacted pages correctly</title>
<updated>2021-03-07T10:25:59+00:00</updated>
<author>
<name>Rokudo Yan</name>
<email>wu-yan@tcl.com</email>
</author>
<published>2021-02-26T01:18:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=d72be3a8e50bf0ea157dbcf3fb98d18574f9e9d3'/>
<id>d72be3a8e50bf0ea157dbcf3fb98d18574f9e9d3</id>
<content type='text'>
commit 2395928158059b8f9858365fce7713ce7fef62e4 upstream.

There exists multiple path may do zram compaction concurrently.
1. auto-compaction triggered during memory reclaim
2. userspace utils write zram&lt;id&gt;/compaction node

So, multiple threads may call zs_shrinker_scan/zs_compact concurrently.
But pages_compacted is a per zsmalloc pool variable and modification
of the variable is not serialized(through under class-&gt;lock).
There are two issues here:
1. the pages_compacted may not equal to total number of pages
freed(due to concurrently add).
2. zs_shrinker_scan may not return the correct number of pages
freed(issued by current shrinker).

The fix is simple:
1. account the number of pages freed in zs_compact locally.
2. use actomic variable pages_compacted to accumulate total number.

Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com
Fixes: 860c707dca155a56 ("zsmalloc: account the number of compacted pages")
Signed-off-by: Rokudo Yan &lt;wu-yan@tcl.com&gt;
Cc: Minchan Kim &lt;minchan@kernel.org&gt;
Cc: Sergey Senozhatsky &lt;sergey.senozhatsky@gmail.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2395928158059b8f9858365fce7713ce7fef62e4 upstream.

There exists multiple path may do zram compaction concurrently.
1. auto-compaction triggered during memory reclaim
2. userspace utils write zram&lt;id&gt;/compaction node

So, multiple threads may call zs_shrinker_scan/zs_compact concurrently.
But pages_compacted is a per zsmalloc pool variable and modification
of the variable is not serialized(through under class-&gt;lock).
There are two issues here:
1. the pages_compacted may not equal to total number of pages
freed(due to concurrently add).
2. zs_shrinker_scan may not return the correct number of pages
freed(issued by current shrinker).

The fix is simple:
1. account the number of pages freed in zs_compact locally.
2. use actomic variable pages_compacted to accumulate total number.

Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com
Fixes: 860c707dca155a56 ("zsmalloc: account the number of compacted pages")
Signed-off-by: Rokudo Yan &lt;wu-yan@tcl.com&gt;
Cc: Minchan Kim &lt;minchan@kernel.org&gt;
Cc: Sergey Senozhatsky &lt;sergey.senozhatsky@gmail.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>floppy: reintroduce O_NDELAY fix</title>
<updated>2021-03-03T16:44:43+00:00</updated>
<author>
<name>Jiri Kosina</name>
<email>jkosina@suse.cz</email>
</author>
<published>2021-01-22T11:13:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=161f2b9e0c199bebb5e2f336be179a68b05c72a6'/>
<id>161f2b9e0c199bebb5e2f336be179a68b05c72a6</id>
<content type='text'>
commit 8a0c014cd20516ade9654fc13b51345ec58e7be8 upstream.

This issue was originally fixed in 09954bad4 ("floppy: refactor open()
flags handling").

The fix as a side-effect, however, introduce issue for open(O_ACCMODE)
that is being used for ioctl-only open. I wrote a fix for that, but
instead of it being merged, full revert of 09954bad4 was performed,
re-introducing the O_NDELAY / O_NONBLOCK issue, and it strikes again.

This is a forward-port of the original fix to current codebase; the
original submission had the changelog below:

====
Commit 09954bad4 ("floppy: refactor open() flags handling"), as a
side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that
this is being used setfdprm userspace for ioctl-only open().

Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE)
modes, while still keeping the original O_NDELAY bug fixed.

Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2101221209060.5622@cbobk.fhfr.pm
Cc: stable@vger.kernel.org
Reported-by: Wim Osterholt &lt;wim@djo.tudelft.nl&gt;
Tested-by: Wim Osterholt &lt;wim@djo.tudelft.nl&gt;
Reported-and-tested-by: Kurt Garloff &lt;kurt@garloff.de&gt;
Fixes: 09954bad4 ("floppy: refactor open() flags handling")
Fixes: f2791e7ead ("Revert "floppy: refactor open() flags handling"")
Signed-off-by: Jiri Kosina &lt;jkosina@suse.cz&gt;
Signed-off-by: Denis Efremov &lt;efremov@linux.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 8a0c014cd20516ade9654fc13b51345ec58e7be8 upstream.

This issue was originally fixed in 09954bad4 ("floppy: refactor open()
flags handling").

The fix as a side-effect, however, introduce issue for open(O_ACCMODE)
that is being used for ioctl-only open. I wrote a fix for that, but
instead of it being merged, full revert of 09954bad4 was performed,
re-introducing the O_NDELAY / O_NONBLOCK issue, and it strikes again.

This is a forward-port of the original fix to current codebase; the
original submission had the changelog below:

====
Commit 09954bad4 ("floppy: refactor open() flags handling"), as a
side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that
this is being used setfdprm userspace for ioctl-only open().

Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE)
modes, while still keeping the original O_NDELAY bug fixed.

Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2101221209060.5622@cbobk.fhfr.pm
Cc: stable@vger.kernel.org
Reported-by: Wim Osterholt &lt;wim@djo.tudelft.nl&gt;
Tested-by: Wim Osterholt &lt;wim@djo.tudelft.nl&gt;
Reported-and-tested-by: Kurt Garloff &lt;kurt@garloff.de&gt;
Fixes: 09954bad4 ("floppy: refactor open() flags handling")
Fixes: f2791e7ead ("Revert "floppy: refactor open() flags handling"")
Signed-off-by: Jiri Kosina &lt;jkosina@suse.cz&gt;
Signed-off-by: Denis Efremov &lt;efremov@linux.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>xen-blkback: fix error handling in xen_blkbk_map()</title>
<updated>2021-02-23T12:59:17+00:00</updated>
<author>
<name>Jan Beulich</name>
<email>jbeulich@suse.com</email>
</author>
<published>2021-02-15T07:56:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=4cec38115dfd5d5c123ece4f4a55165a5a2e8cc0'/>
<id>4cec38115dfd5d5c123ece4f4a55165a5a2e8cc0</id>
<content type='text'>
commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 upstream.

The function uses a goto-based loop, which may lead to an earlier error
getting discarded by a later iteration. Exit this ad-hoc loop when an
error was encountered.

The out-of-memory error path additionally fails to fill a structure
field looked at by xen_blkbk_unmap_prepare() before inspecting the
handle which does get properly set (to BLKBACK_INVALID_HANDLE).

Since the earlier exiting from the ad-hoc loop requires the same field
filling (invalidation) as that on the out-of-memory path, fold both
paths. While doing so, drop the pr_alert(), as extra log messages aren't
going to help the situation (the kernel will log oom conditions already
anyway).

This is XSA-365.

Signed-off-by: Jan Beulich &lt;jbeulich@suse.com&gt;
Reviewed-by: Juergen Gross &lt;jgross@suse.com&gt;
Reviewed-by: Julien Grall &lt;julien@xen.org&gt;
Signed-off-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 upstream.

The function uses a goto-based loop, which may lead to an earlier error
getting discarded by a later iteration. Exit this ad-hoc loop when an
error was encountered.

The out-of-memory error path additionally fails to fill a structure
field looked at by xen_blkbk_unmap_prepare() before inspecting the
handle which does get properly set (to BLKBACK_INVALID_HANDLE).

Since the earlier exiting from the ad-hoc loop requires the same field
filling (invalidation) as that on the out-of-memory path, fold both
paths. While doing so, drop the pr_alert(), as extra log messages aren't
going to help the situation (the kernel will log oom conditions already
anyway).

This is XSA-365.

Signed-off-by: Jan Beulich &lt;jbeulich@suse.com&gt;
Reviewed-by: Juergen Gross &lt;jgross@suse.com&gt;
Reviewed-by: Julien Grall &lt;julien@xen.org&gt;
Signed-off-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>xen-blkback: don't "handle" error by BUG()</title>
<updated>2021-02-23T12:59:17+00:00</updated>
<author>
<name>Jan Beulich</name>
<email>jbeulich@suse.com</email>
</author>
<published>2021-02-15T07:54:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=746d5c20c9cbeac0ee9f24a51862eb551c7b8706'/>
<id>746d5c20c9cbeac0ee9f24a51862eb551c7b8706</id>
<content type='text'>
commit 5a264285ed1cd32e26d9de4f3c8c6855e467fd63 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich &lt;jbeulich@suse.com&gt;
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 5a264285ed1cd32e26d9de4f3c8c6855e467fd63 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich &lt;jbeulich@suse.com&gt;
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>block: rsxx: select CONFIG_CRC32</title>
<updated>2021-01-17T12:57:55+00:00</updated>
<author>
<name>Arnd Bergmann</name>
<email>arnd@arndb.de</email>
</author>
<published>2021-01-03T21:42:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=bb1cdae411c66a1d1d056ef65611b13131350f4b'/>
<id>bb1cdae411c66a1d1d056ef65611b13131350f4b</id>
<content type='text'>
commit 36a106a4c1c100d55ba3d32a21ef748cfcd4fa99 upstream.

Without crc32, the driver fails to link:

arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config':
config.c:(.text+0x124): undefined reference to `crc32_le'

Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver")
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 36a106a4c1c100d55ba3d32a21ef748cfcd4fa99 upstream.

Without crc32, the driver fails to link:

arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config':
config.c:(.text+0x124): undefined reference to `crc32_le'

Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver")
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()</title>
<updated>2021-01-09T12:35:50+00:00</updated>
<author>
<name>SeongJae Park</name>
<email>sjpark@amazon.de</email>
</author>
<published>2020-12-14T09:04:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=a449baadb11bf6c840aba4ab11d075896f088bfc'/>
<id>a449baadb11bf6c840aba4ab11d075896f088bfc</id>
<content type='text'>
commit 2e85d32b1c865bec703ce0c962221a5e955c52c2 upstream.

Some code does not directly make 'xenbus_watch' object and call
'register_xenbus_watch()' but use 'xenbus_watch_path()' instead.  This
commit adds support of 'will_handle' callback in the
'xenbus_watch_path()' and it's wrapper, 'xenbus_watch_pathfmt()'.

This is part of XSA-349

Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park &lt;sjpark@amazon.de&gt;
Reported-by: Michael Kurth &lt;mku@amazon.de&gt;
Reported-by: Pawel Wieczorkiewicz &lt;wipawel@amazon.de&gt;
Reviewed-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;


</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2e85d32b1c865bec703ce0c962221a5e955c52c2 upstream.

Some code does not directly make 'xenbus_watch' object and call
'register_xenbus_watch()' but use 'xenbus_watch_path()' instead.  This
commit adds support of 'will_handle' callback in the
'xenbus_watch_path()' and it's wrapper, 'xenbus_watch_pathfmt()'.

This is part of XSA-349

Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park &lt;sjpark@amazon.de&gt;
Reported-by: Michael Kurth &lt;mku@amazon.de&gt;
Reported-by: Pawel Wieczorkiewicz &lt;wipawel@amazon.de&gt;
Reviewed-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Juergen Gross &lt;jgross@suse.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;


</pre>
</div>
</content>
</entry>
</feed>
