linux.git/drivers/block, branch v5.15.185

loop: aio inherit the ioprio of original request

2025-05-02T05:44:38+00:00

[ Upstream commit 1fdb8188c3d505452b40cdb365b1bb32be533a8e ]

Set cmd->iocb.ki_ioprio to the ioprio of loop device's request.
The purpose is to inherit the original request ioprio in the aio
flow.

Signed-off-by: Yunlong Xing 
Signed-off-by: Zhiguo Niu 
Reviewed-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20250414030159.501180-1-yunlong.xing@unisoc.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

loop: LOOP_SET_FD: send uevents for partitions

2025-05-02T05:44:13+00:00

commit 0dba7a05b9e47d8b546399117b0ddf2426dc6042 upstream.

Remove the suppression of the uevents before scanning for partitions.
The partitions inherit their suppression settings from their parent device,
which lead to the uevents being dropped.

This is similar to the same changes for LOOP_CONFIGURE done in
commit bb430b694226 ("loop: LOOP_CONFIGURE: send uevents for partitions").

Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v3-1-60ff69ac6088@linutronix.de
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

loop: properly send KOBJ_CHANGED uevent for disk device

2025-05-02T05:44:13+00:00

commit e7bc0010ceb403d025100698586c8e760921d471 upstream.

The original commit message and the wording "uncork" in the code comment
indicate that it is expected that the suppressed event instances are
automatically sent after unsuppressing.
This is not the case, instead they are discarded.
In effect this means that no "changed" events are emitted on the device
itself by default.
While each discovered partition does trigger a changed event on the
device, devices without partitions don't have any event emitted.

This makes udev miss the device creation and prompted workarounds in
userspace. See the linked util-linux/losetup bug.

Explicitly emit the events and drop the confusingly worded comments.

Link: https://github.com/util-linux/util-linux/issues/2434
Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh 
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v2-1-0c4e6a923b2a@linutronix.de
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

nbd: don't allow reconnect after disconnect

2025-03-13T11:49:51+00:00

[ Upstream commit 844b8cdc681612ff24df62cdefddeab5772fadf1 ]

Following process can cause nbd_config UAF:

1) grab nbd_config temporarily;

2) nbd_genl_disconnect() flush all recv_work() and release the
initial reference:

  nbd_genl_disconnect
   nbd_disconnect_and_put
    nbd_disconnect
     flush_workqueue(nbd->recv_workq)
    if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...))
     nbd_config_put
     -> due to step 1), reference is still not zero

3) nbd_genl_reconfigure() queue recv_work() again;

  nbd_genl_reconfigure
   config = nbd_get_config_unlocked(nbd)
   if (!config)
   -> succeed
   if (!test_bit(NBD_RT_BOUND, ...))
   -> succeed
   nbd_reconnect_socket
    queue_work(nbd->recv_workq, &args->work)

4) step 1) release the reference;

5) Finially, recv_work() will trigger UAF:

  recv_work
   nbd_config_put(nbd)
   -> nbd_config is freed
   atomic_dec(&config->recv_threads)
   -> UAF

Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so
that nbd_genl_reconfigure() will fail.

Fixes: b7aa3d39385d ("nbd: add a reconfigure netlink command")
Reported-by: syzbot+6b0df248918b92c33e6a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/675bfb65.050a0220.1a2d0d.0006.GAE@google.com/
Signed-off-by: Yu Kuai 
Reviewed-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20250103092859.3574648-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

virtio-blk: don't keep queue frozen during system suspend

2025-01-09T12:28:40+00:00

[ Upstream commit 7678abee0867e6b7fb89aa40f6e9f575f755fb37 ]

Commit 4ce6e2db00de ("virtio-blk: Ensure no requests in virtqueues before
deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's
PM callbacks. And the motivation is to drain inflight IOs before suspending.

block layer's queue freeze looks very handy, but it is also easy to cause
deadlock, such as, any attempt to call into bio_queue_enter() may run into
deadlock if the queue is frozen in current context. There are all kinds
of ->suspend() called in suspend context, so keeping queue frozen in the
whole suspend context isn't one good idea. And Marek reported lockdep
warning[1] caused by virtio-blk's freeze queue in virtblk_freeze().

[1] https://lore.kernel.org/linux-block/ca16370e-d646-4eee-b9cc-87277c89c43c@samsung.com/

Given the motivation is to drain in-flight IOs, it can be done by calling
freeze & unfreeze, meantime restore to previous behavior by keeping queue
quiesced during suspend.

Cc: Yi Sun 
Cc: Michael S. Tsirkin 
Cc: Jason Wang 
Cc: Stefan Hajnoczi 
Cc: virtualization@lists.linux.dev
Reported-by: Marek Szyprowski 
Signed-off-by: Ming Lei 
Acked-by: Stefan Hajnoczi 
Link: https://lore.kernel.org/r/20241112125821.1475793-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

zram: refuse to use zero sized block device as backing device

2025-01-09T12:28:34+00:00

commit be48c412f6ebf38849213c19547bc6d5b692b5e5 upstream.

Patch series "zram: fix backing device setup issue", v2.

This series fixes two bugs of backing device setting:

- ZRAM should reject using a zero sized (or the uninitialized ZRAM
  device itself) as the backing device.
- Fix backing device leaking when removing a uninitialized ZRAM
  device.


This patch (of 2):

Setting a zero sized block device as backing device is pointless, and one
can easily create a recursive loop by setting the uninitialized ZRAM
device itself as its own backing device by (zram0 is uninitialized):

    echo /dev/zram0 > /sys/block/zram0/backing_dev

It's definitely a wrong config, and the module will pin itself, kernel
should refuse doing so in the first place.

By refusing to use zero sized device we avoided misuse cases including
this one above.

Link: https://lkml.kernel.org/r/20241209165717.94215-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20241209165717.94215-2-ryncsn@gmail.com
Fixes: 013bf95a83ec ("zram: add interface to specif backing device")
Signed-off-by: Kairui Song 
Reported-by: Desheng Wu 
Reviewed-by: Sergey Senozhatsky 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

brd: defer automatic disk creation until module initialization succeeds

2024-12-14T18:50:42+00:00

[ Upstream commit 826cc42adf44930a633d11a5993676d85ddb0842 ]

My colleague Wupeng found the following problems during fault injection:

BUG: unable to handle page fault for address: fffffbfff809d073
PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:__asan_load8+0x4c/0xa0
...
Call Trace:
 
 blkdev_put_whole+0x41/0x70
 bdev_release+0x1a3/0x250
 blkdev_release+0x11/0x20
 __fput+0x1d7/0x4a0
 task_work_run+0xfc/0x180
 syscall_exit_to_user_mode+0x1de/0x1f0
 do_syscall_64+0x6b/0x170
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

loop_init() is calling loop_add() after __register_blkdev() succeeds and
is ignoring disk_add() failure from loop_add(), for loop_add() failure
is not fatal and successfully created disks are already visible to
bdev_open().

brd_init() is currently calling brd_alloc() before __register_blkdev()
succeeds and is releasing successfully created disks when brd_init()
returns an error. This can cause UAF for the latter two case:

case 1:
    T1:
modprobe brd
  brd_init
    brd_alloc(0) // success
      add_disk
        disk_scan_partitions
          bdev_file_open_by_dev // alloc file
          fput // won't free until back to userspace
    brd_alloc(1) // failed since mem alloc error inject
  // error path for modprobe will release code segment
  // back to userspace
  __fput
    blkdev_release
      bdev_release
        blkdev_put_whole
          bdev->bd_disk->fops->release // fops is freed now, UAF!

case 2:
    T1:                            T2:
modprobe brd
  brd_init
    brd_alloc(0) // success
                                   open(/dev/ram0)
    brd_alloc(1) // fail
  // error path for modprobe

                                   close(/dev/ram0)
                                   ...
                                   /* UAF! */
                                   bdev->bd_disk->fops->release

Fix this problem by following what loop_init() does. Besides,
reintroduce brd_devices_mutex to help serialize modifications to
brd_list.

Fixes: 7f9b348cb5e9 ("brd: convert to blk_alloc_disk/blk_cleanup_disk")
Reported-by: Wupeng Ma 
Signed-off-by: Yang Erkun 
Reviewed-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20241030034914.907829-1-yangerkun@huaweicloud.com
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

brd: remove brd_devices_mutex mutex

2024-12-14T18:50:42+00:00

[ Upstream commit 00358933f66c44d511368a57eb421e172447cfb9 ]

If brd_alloc() from brd_probe() is called before brd_alloc() from
brd_init() is called, module loading will fail with -EEXIST error.
To close this race, call __register_blkdev() just before leaving
brd_init().

Then, we can remove brd_devices_mutex mutex, for brd_device list
will no longer be accessed concurrently.

Signed-off-by: Tetsuo Handa 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Luis Chamberlain 
Link: https://lore.kernel.org/r/6b074af7-c165-4fab-b7da-8270a4f6f6cd@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe 
Stable-dep-of: 826cc42adf44 ("brd: defer automatic disk creation until module initialization succeeds")
Signed-off-by: Sasha Levin

aoe: fix the potential use-after-free problem in more places

2024-10-17T13:11:39+00:00

commit 6d6e54fc71ad1ab0a87047fd9c211e75d86084a3 upstream.

For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.

Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
packet to tx queue. So they should also use dev_hold() to increase the
refcnt of skb->dev.

On the other hand, moving dev_put() to tx() causes that the refcnt of
skb->dev be reduced to a negative value, because corresponding
dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.

Cc: stable@vger.kernel.org
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts")
Reported-by: Nicolai Stange 
Signed-off-by: Chun-Yi Lee 
Link: https://lore.kernel.org/stable/20240624064418.27043-1-jlee%40suse.com
Link: https://lore.kernel.org/r/20241002035458.24401-1-jlee@suse.com
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

drbd: Add NULL check for net_conf to prevent dereference in state validation

2024-10-17T13:11:13+00:00

commit a5e61b50c9f44c5edb6e134ede6fee8806ffafa9 upstream.

If the net_conf pointer is NULL and the code attempts to access its
fields without a check, it will lead to a null pointer dereference.
Add a NULL check before dereferencing the pointer.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Cc: stable@vger.kernel.org
Signed-off-by: Mikhail Lobanov 
Link: https://lore.kernel.org/r/20240909133740.84297-1-m.lobanov@rosalinux.ru
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman