linux.git/drivers/clk, branch v6.17-rc6 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2025-07-31T20:36:27+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-31T20:36:27+00:00 2d945dde7fa3f17f46349360a9f97614de9f47da Pull clk updates from Stephen Boyd: "This is the usual collection of primarily clk driver updates. The big part of the diff is all the new Qualcomm clk drivers added for a few SoCs they're working on. The other two vendors with significant work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some new SoCs while Amlogic is starting a significant refactoring to simplify their code. The core framework gained a pair of helpers to get the 'struct device' or 'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit tests were added for these simple helpers as well. Beyond that core change there are lots of little fixes throughout the clk drivers for the stuff we see every day, wrong clk driver data that affects tree topology or supported frequencies, etc. They're not found until the clks are actually used by some consumer device driver. New Drivers: - Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the Qualcomm Milos SoC - Camera, display, GPU, and video clock controllers for Qualcomm QCS615 - Video clock controller driver for Qualcomm SM6350 - Camera clock controller driver for Qualcomm SC8180X - I3C clocks and resets on Renesas RZ/G3E - Expanded Serial Peripheral Interface (xSPI) clocks and resets on Renesas RZ/V2H(P) and RZ/V2N - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P) - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H - Ethernet clocks and resets on Renesas RZ/G3E - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas RZ/V2N Updates: - Support atomic PWMs in the PWM clk driver - clk_hw_get_dev() and clk_hw_get_of_node() helpers - Replace round_rate() with determine_rate() in various clk drivers - Convert clk DT bindings to DT schema format for DT validation - Various clk driver cleanups and refactorings from static analysis tools and possibly real humans - A lot of little fixes here and there to things like clk tree topology, missing frequencies, flagging clks as critical, etc" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits) clk: clocking-wizard: Fix the round rate handling for versal clk: Fix typos clk: spacemit: ccu_pll: fix error return value in recalc_rate callback clk: tegra: periph: Make tegra_clk_periph_ops static clk: tegra: periph: Fix error handling and resolve unsigned compare warning clk: imx: scu: convert from round_rate() to determine_rate() clk: imx: pllv4: convert from round_rate() to determine_rate() clk: imx: pllv3: convert from round_rate() to determine_rate() clk: imx: pllv2: convert from round_rate() to determine_rate() clk: imx: pll14xx: convert from round_rate() to determine_rate() clk: imx: pfd: convert from round_rate() to determine_rate() clk: imx: frac-pll: convert from round_rate() to determine_rate() clk: imx: fracn-gppll: convert from round_rate() to determine_rate() clk: imx: fixup-div: convert from round_rate() to determine_rate() clk: imx: cpu: convert from round_rate() to determine_rate() clk: imx: busy: convert from round_rate() to determine_rate() clk: imx: composite-93: remove round_rate() in favor of determine_rate() clk: imx: composite-8m: remove round_rate() in favor of determine_rate() clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls clk: imx: Remove redundant pm_runtime_mark_last_busy() calls ... 
Pull clk updates from Stephen Boyd:
 "This is the usual collection of primarily clk driver updates.

  The big part of the diff is all the new Qualcomm clk drivers added for
  a few SoCs they're working on. The other two vendors with significant
  work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
  to existing drivers and supports some new SoCs while Amlogic is
  starting a significant refactoring to simplify their code.

  The core framework gained a pair of helpers to get the 'struct device'
  or 'struct device_node' associated with a 'struct clk_hw'. Some
  associated KUnit tests were added for these simple helpers as well.

  Beyond that core change there are lots of little fixes throughout the
  clk drivers for the stuff we see every day, wrong clk driver data that
  affects tree topology or supported frequencies, etc. They're not found
  until the clks are actually used by some consumer device driver.

  New Drivers:
   - Global, display, gpu, video, camera, tcsr, and rpmh clock
     controller for the Qualcomm Milos SoC
   - Camera, display, GPU, and video clock controllers for Qualcomm
     QCS615
   - Video clock controller driver for Qualcomm SM6350
   - Camera clock controller driver for Qualcomm SC8180X
   - I3C clocks and resets on Renesas RZ/G3E
   - Expanded Serial Peripheral Interface (xSPI) clocks and resets on
     Renesas RZ/V2H(P) and RZ/V2N
   - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
   - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
   - Ethernet clocks and resets on Renesas RZ/G3E
   - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
     (R9A09G087) SoCs
   - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
   - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
     RZ/V2N

  Updates:
   - Support atomic PWMs in the PWM clk driver
   - clk_hw_get_dev() and clk_hw_get_of_node() helpers
   - Replace round_rate() with determine_rate() in various clk drivers
   - Convert clk DT bindings to DT schema format for DT validation
   - Various clk driver cleanups and refactorings from static analysis
     tools and possibly real humans
   - A lot of little fixes here and there to things like clk tree
     topology, missing frequencies, flagging clks as critical, etc"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
  clk: clocking-wizard: Fix the round rate handling for versal
  clk: Fix typos
  clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
  clk: tegra: periph: Make tegra_clk_periph_ops static
  clk: tegra: periph: Fix error handling and resolve unsigned compare warning
  clk: imx: scu: convert from round_rate() to determine_rate()
  clk: imx: pllv4: convert from round_rate() to determine_rate()
  clk: imx: pllv3: convert from round_rate() to determine_rate()
  clk: imx: pllv2: convert from round_rate() to determine_rate()
  clk: imx: pll14xx: convert from round_rate() to determine_rate()
  clk: imx: pfd: convert from round_rate() to determine_rate()
  clk: imx: frac-pll: convert from round_rate() to determine_rate()
  clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
  clk: imx: fixup-div: convert from round_rate() to determine_rate()
  clk: imx: cpu: convert from round_rate() to determine_rate()
  clk: imx: busy: convert from round_rate() to determine_rate()
  clk: imx: composite-93: remove round_rate() in favor of determine_rate()
  clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
  clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
  clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
  ...
Merge branch 'clk-fixes' into clk-next 2025-07-31T16:10:06+00:00 Stephen Boyd sboyd@kernel.org 2025-07-31T16:10:06+00:00 64c21f253a3737c15ab745e9276b2352d86aed26 Resolve conflicts with i.MX95 changes 88768d6f8c13 ("clk: imx95-blk-ctl: Rename lvds and displaymix csr blk") in clk-imx and aacc875a448d ("clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data") in clk-fixes. * clk-fixes: clk: sunxi-ng: v3s: Fix TCON clock parents clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name clk: sunxi-ng: v3s: Fix CSI SCLK clock name dt-bindings: clock: mediatek: Add #reset-cells property for MT8188 clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data clk: scmi: Handle case where child clocks are initialized before their parents clk: sunxi-ng: a523: Mark MBUS clock as critical 
Resolve conflicts with i.MX95 changes 88768d6f8c13 ("clk:
imx95-blk-ctl: Rename lvds and displaymix csr blk") in clk-imx
and aacc875a448d ("clk: imx: Fix an out-of-bounds access in
dispmix_csr_clk_dev_data") in clk-fixes.

* clk-fixes:
  clk: sunxi-ng: v3s: Fix TCON clock parents
  clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
  clk: sunxi-ng: v3s: Fix CSI SCLK clock name
  dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
  clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
  clk: scmi: Handle case where child clocks are initialized before their parents
  clk: sunxi-ng: a523: Mark MBUS clock as critical
Merge branch 'clk-pm' into clk-next 2025-07-29T22:19:32+00:00 Stephen Boyd sboyd@kernel.org 2025-07-29T22:19:32+00:00 3cf186ecc164e19aa47450d412b2aa2f19559f9a * clk-pm: clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls clk: imx: Remove redundant pm_runtime_mark_last_busy() calls Documentation: PM: *_autosuspend() functions update last busy time PM: runtime: Mark last busy stamp in pm_request_autosuspend() PM: runtime: Mark last busy stamp in pm_runtime_autosuspend() PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend() PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend() PM: runtime: Document return values of suspend-related API functions 
* clk-pm:
  clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
  clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
  Documentation: PM: *_autosuspend() functions update last busy time
  PM: runtime: Mark last busy stamp in pm_request_autosuspend()
  PM: runtime: Mark last busy stamp in pm_runtime_autosuspend()
  PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend()
  PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend()
  PM: runtime: Document return values of suspend-related API functions
Merge branches 'clk-rockchip', 'clk-thead', 'clk-microchip', 'clk-imx' and 'clk-qcom' into clk-next 2025-07-29T22:19:17+00:00 Stephen Boyd sboyd@kernel.org 2025-07-29T22:19:17+00:00 c30cc9ffc1491f049f1bffb8bac4ef3f553767d2 * clk-rockchip: clk: rockchip: rk3568: Add PLL rate for 132MHz * clk-thead: clk: thead: th1520-ap: Describe mux clocks with clk_mux clk: thead: th1520-ap: Correctly refer the parent of osc_12m clk: thead: Mark essential bus clocks as CLK_IGNORE_UNUSED * clk-microchip: clk: at91: sam9x7: update pll clk ranges * clk-imx: MAINTAINERS: Update i.MX Clock Entry clk: imx95-blk-ctl: Add clock for i.MX94 LVDS/Display CSR clk: imx95-blk-ctl: Rename lvds and displaymix csr blk clk: imx95-blk-ctl: Fix synchronous abort dt-bindings: clock: Add support for i.MX94 LVDS/DISPLAY CSR clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data * clk-qcom: (65 commits) dt-bindings: clock: qcom,sm4450-dispcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,sm4450-camcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,mmcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,sm8150-camcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom: Remove double colon from description clk: qcom: Add Video Clock controller (VIDEOCC) driver for Milos dt-bindings: clock: qcom: document the Milos Video Clock Controller clk: qcom: Add Graphics Clock controller (GPUCC) driver for Milos dt-bindings: clock: qcom: document the Milos GPU Clock Controller clk: qcom: Add Display Clock controller (DISPCC) driver for Milos dt-bindings: clock: qcom: document the Milos Display Clock Controller clk: qcom: Add Camera Clock controller (CAMCC) driver for Milos dt-bindings: clock: qcom: document the Milos Camera Clock Controller clk: qcom: Add Global Clock controller (GCC) driver for Milos dt-bindings: clock: qcom: document the Milos Global Clock Controller clk: qcom: common: Add support to register rcg dfs in qcom_cc_really_probe clk: qcom: gcc-x1e80100: Add missing video resets dt-bindings: clock: qcom,x1e80100-gcc: Add missing video resets clk: qcom: videocc-sm8550: Add separate frequency tables for X1E80100 clk: qcom: videocc-sm8550: Allow building without SM8550/SM8560 GCC ... 
* clk-rockchip:
  clk: rockchip: rk3568: Add PLL rate for 132MHz

* clk-thead:
  clk: thead: th1520-ap: Describe mux clocks with clk_mux
  clk: thead: th1520-ap: Correctly refer the parent of osc_12m
  clk: thead: Mark essential bus clocks as CLK_IGNORE_UNUSED

* clk-microchip:
  clk: at91: sam9x7: update pll clk ranges

* clk-imx:
  MAINTAINERS: Update i.MX Clock Entry
  clk: imx95-blk-ctl: Add clock for i.MX94 LVDS/Display CSR
  clk: imx95-blk-ctl: Rename lvds and displaymix csr blk
  clk: imx95-blk-ctl: Fix synchronous abort
  dt-bindings: clock: Add support for i.MX94 LVDS/DISPLAY CSR
  clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data

* clk-qcom: (65 commits)
  dt-bindings: clock: qcom,sm4450-dispcc: Reference qcom,gcc.yaml
  dt-bindings: clock: qcom,sm4450-camcc: Reference qcom,gcc.yaml
  dt-bindings: clock: qcom,mmcc: Reference qcom,gcc.yaml
  dt-bindings: clock: qcom,sm8150-camcc: Reference qcom,gcc.yaml
  dt-bindings: clock: qcom: Remove double colon from description
  clk: qcom: Add Video Clock controller (VIDEOCC) driver for Milos
  dt-bindings: clock: qcom: document the Milos Video Clock Controller
  clk: qcom: Add Graphics Clock controller (GPUCC) driver for Milos
  dt-bindings: clock: qcom: document the Milos GPU Clock Controller
  clk: qcom: Add Display Clock controller (DISPCC) driver for Milos
  dt-bindings: clock: qcom: document the Milos Display Clock Controller
  clk: qcom: Add Camera Clock controller (CAMCC) driver for Milos
  dt-bindings: clock: qcom: document the Milos Camera Clock Controller
  clk: qcom: Add Global Clock controller (GCC) driver for Milos
  dt-bindings: clock: qcom: document the Milos Global Clock Controller
  clk: qcom: common: Add support to register rcg dfs in qcom_cc_really_probe
  clk: qcom: gcc-x1e80100: Add missing video resets
  dt-bindings: clock: qcom,x1e80100-gcc: Add missing video resets
  clk: qcom: videocc-sm8550: Add separate frequency tables for X1E80100
  clk: qcom: videocc-sm8550: Allow building without SM8550/SM8560 GCC
  ...
Merge branches 'clk-renesas', 'clk-samsung', 'clk-spacemit', 'clk-allwinner' and 'clk-amlogic' into clk-next 2025-07-29T22:18:33+00:00 Stephen Boyd sboyd@kernel.org 2025-07-29T22:18:33+00:00 e3abdd1870b7dcccf3447a78037217b95929587d * clk-renesas: (42 commits) clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs clk: renesas: r9a09g057: Add XSPI clock/reset clk: renesas: r9a09g056: Add XSPI clock/reset clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting clk: renesas: r9a09g057: Add support for xspi mux and divider clk: renesas: r9a09g056: Add support for xspi mux and divider clk: renesas: r9a09g077: Add RIIC module clocks clk: renesas: r9a09g077: Add PLL2 and SDHI clock support clk: renesas: rzv2h: Drop redundant base pointer from pll_clk clk: renesas: r9a09g057: Add entries for the RSPIs dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock clk: renesas: rzv2h: Add missing include file clk: renesas: rzv2h: Use devm_kmemdup_array() clk: renesas: Add CPG/MSSR support to RZ/N2H SoC clk: renesas: r9a09g077: Add PCLKL core clock dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID ... * clk-samsung: clk: samsung: exynosautov920: add block hsi2 clock support dt-bindings: clock: exynosautov920: add hsi2 clock definitions dt-bindings: clock: exynosautov920: sort clock definitions clk: samsung: exynos850: fix a comment clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD * clk-spacemit: clk: spacemit: ccu_pll: fix error return value in recalc_rate callback reset: spacemit: add support for SpacemiT CCU resets clk: spacemit: mark K1 pll1_d8 as critical clk: spacemit: define three reset-only CCUs clk: spacemit: set up reset auxiliary devices soc: spacemit: create a header for clock/reset registers dt-bindings: soc: spacemit: define spacemit,k1-ccu resets * clk-allwinner: clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate() clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll clk: sunxi-ng: v3s: Fix de clock definition clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset * clk-amlogic: clk: amlogic: s4: remove unused data clk: amlogic: drop clk_regmap tables clk: amlogic: get regmap with clk_regmap_init clk: amlogic: remove unnecessary headers clk: amlogic: axg-audio: use the auxiliary reset driver 
* clk-renesas: (42 commits)
  clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well
  clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs
  clk: renesas: r9a09g057: Add XSPI clock/reset
  clk: renesas: r9a09g056: Add XSPI clock/reset
  clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting
  clk: renesas: r9a09g057: Add support for xspi mux and divider
  clk: renesas: r9a09g056: Add support for xspi mux and divider
  clk: renesas: r9a09g077: Add RIIC module clocks
  clk: renesas: r9a09g077: Add PLL2 and SDHI clock support
  clk: renesas: rzv2h: Drop redundant base pointer from pll_clk
  clk: renesas: r9a09g057: Add entries for the RSPIs
  dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID
  dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock
  clk: renesas: rzv2h: Add missing include file
  clk: renesas: rzv2h: Use devm_kmemdup_array()
  clk: renesas: Add CPG/MSSR support to RZ/N2H SoC
  clk: renesas: r9a09g077: Add PCLKL core clock
  dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support
  dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC
  dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID
  ...

* clk-samsung:
  clk: samsung: exynosautov920: add block hsi2 clock support
  dt-bindings: clock: exynosautov920: add hsi2 clock definitions
  dt-bindings: clock: exynosautov920: sort clock definitions
  clk: samsung: exynos850: fix a comment
  clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock
  clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD

* clk-spacemit:
  clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
  reset: spacemit: add support for SpacemiT CCU resets
  clk: spacemit: mark K1 pll1_d8 as critical
  clk: spacemit: define three reset-only CCUs
  clk: spacemit: set up reset auxiliary devices
  soc: spacemit: create a header for clock/reset registers
  dt-bindings: soc: spacemit: define spacemit,k1-ccu resets

* clk-allwinner:
  clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate()
  clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate()
  clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate()
  clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate()
  clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll
  clk: sunxi-ng: v3s: Fix de clock definition
  clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset
  dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset

* clk-amlogic:
  clk: amlogic: s4: remove unused data
  clk: amlogic: drop clk_regmap tables
  clk: amlogic: get regmap with clk_regmap_init
  clk: amlogic: remove unnecessary headers
  clk: amlogic: axg-audio: use the auxiliary reset driver
Merge branches 'clk-bindings', 'clk-cleanup', 'clk-pwm', 'clk-hw-device', 'clk-xilinx' and 'clk-adi' into clk-next 2025-07-29T22:18:13+00:00 Stephen Boyd sboyd@kernel.org 2025-07-29T22:18:13+00:00 f7887ee4ee2b1fa2a538db4dbf3cec26538f317a - Support atomic PWMs in the PWM clk driver - clk_hw_get_dev() and clk_hw_get_of_node() helpers * clk-bindings: (30 commits) dt-bindings: clock: convert lpc1850-cgu.txt to yaml format dt-bindings: clock: Convert qca,ath79-pll to DT schema dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schema dt-bindings: clock: Convert moxa,moxart-clock to DT schema dt-bindings: clock: Convert microchip,pic32mzda-clk to DT schema dt-bindings: clock: Convert maxim,max9485 to DT schema dt-bindings: clock: Convert qcom,krait-cc to DT schema dt-bindings: clock: qcom: Remove double colon from description dt-bindings: clock: convert lpc1850-ccu.txt to yaml format dt-bindings: clock: Convert alphascale,asm9260-clock-controller to DT schema dt-bindings: clock: Convert marvell,armada-370-corediv-clock to DT schema dt-bindings: clock: Convert marvell,armada-3700-periph-clock to DT schema dt-bindings: clock: Convert marvell,mvebu-core-clock to DT schema dt-bindings: clock: Convert marvell,berlin2-clk to DT schema dt-bindings: clock: Convert marvell,dove-divider-clock to DT schema dt-bindings: clock: Convert marvell,armada-3700-tbg-clock to DT schema dt-bindings: clock: Convert marvell-armada-370-gating-clock to DT schema dt-bindings: clock: Convert marvell,armada-xp-cpu-clock to DT schema dt-bindings: clock: Convert TI-NSPIRE clocks to DT schema dt-bindings: clock: Convert lsi,axm5516-clks to DT schema ... * clk-cleanup: (29 commits) clk: clocking-wizard: Fix the round rate handling for versal clk: Fix typos clk: tegra: periph: Make tegra_clk_periph_ops static clk: tegra: periph: Fix error handling and resolve unsigned compare warning clk: imx: scu: convert from round_rate() to determine_rate() clk: imx: pllv4: convert from round_rate() to determine_rate() clk: imx: pllv3: convert from round_rate() to determine_rate() clk: imx: pllv2: convert from round_rate() to determine_rate() clk: imx: pll14xx: convert from round_rate() to determine_rate() clk: imx: pfd: convert from round_rate() to determine_rate() clk: imx: frac-pll: convert from round_rate() to determine_rate() clk: imx: fracn-gppll: convert from round_rate() to determine_rate() clk: imx: fixup-div: convert from round_rate() to determine_rate() clk: imx: cpu: convert from round_rate() to determine_rate() clk: imx: busy: convert from round_rate() to determine_rate() clk: imx: composite-93: remove round_rate() in favor of determine_rate() clk: imx: composite-8m: remove round_rate() in favor of determine_rate() clk: bcm: bcm2835: convert from round_rate() to determine_rate() MAINTAINERS: Include clk.py under COMMON CLK FRAMEWORK entry clk: ti: Simplify ti_find_clock_provider() ... * clk-pwm: clk: pwm: Make use of non-sleeping PWMs clk: pwm: Don't reconfigure running PWM at probe time clk: pwm: Convert to use pwm_apply_might_sleep() clk: pwm: Let .get_duty_cycle() return the real duty cycle * clk-hw-device: clk: tests: add clk_hw_get_dev() and clk_hw_get_of_node() tests clk: tests: Make clk_register_clk_parent_data_device_driver() common clk: add a clk_hw helpers to get the clock device or device_node * clk-xilinx: clk: xilinx: vcu: Update vcu init/reset sequence clk: xilinx: vcu: unregister pll_post only if registered correctly * clk-adi: clk: clk-axi-clkgen: fix coding style issues clk: clk-axi-clkgen move to min/max() clk: clk-axi-clkgen: detect axi_clkgen_limits at runtime include: adi-axi-common: add new helper macros include: linux: move adi-axi-common.h out of fpga clk: clk-axi-clkgen: make sure to include mod_devicetable.h clk: clk-axi-clkgen: fix fpfd_max frequency for zynq 
 - Support atomic PWMs in the PWM clk driver
 - clk_hw_get_dev() and clk_hw_get_of_node() helpers

* clk-bindings: (30 commits)
  dt-bindings: clock: convert lpc1850-cgu.txt to yaml format
  dt-bindings: clock: Convert qca,ath79-pll to DT schema
  dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schema
  dt-bindings: clock: Convert moxa,moxart-clock to DT schema
  dt-bindings: clock: Convert microchip,pic32mzda-clk to DT schema
  dt-bindings: clock: Convert maxim,max9485 to DT schema
  dt-bindings: clock: Convert qcom,krait-cc to DT schema
  dt-bindings: clock: qcom: Remove double colon from description
  dt-bindings: clock: convert lpc1850-ccu.txt to yaml format
  dt-bindings: clock: Convert alphascale,asm9260-clock-controller to DT schema
  dt-bindings: clock: Convert marvell,armada-370-corediv-clock to DT schema
  dt-bindings: clock: Convert marvell,armada-3700-periph-clock to DT schema
  dt-bindings: clock: Convert marvell,mvebu-core-clock to DT schema
  dt-bindings: clock: Convert marvell,berlin2-clk to DT schema
  dt-bindings: clock: Convert marvell,dove-divider-clock to DT schema
  dt-bindings: clock: Convert marvell,armada-3700-tbg-clock to DT schema
  dt-bindings: clock: Convert marvell-armada-370-gating-clock to DT schema
  dt-bindings: clock: Convert marvell,armada-xp-cpu-clock to DT schema
  dt-bindings: clock: Convert TI-NSPIRE clocks to DT schema
  dt-bindings: clock: Convert lsi,axm5516-clks to DT schema
  ...

* clk-cleanup: (29 commits)
  clk: clocking-wizard: Fix the round rate handling for versal
  clk: Fix typos
  clk: tegra: periph: Make tegra_clk_periph_ops static
  clk: tegra: periph: Fix error handling and resolve unsigned compare warning
  clk: imx: scu: convert from round_rate() to determine_rate()
  clk: imx: pllv4: convert from round_rate() to determine_rate()
  clk: imx: pllv3: convert from round_rate() to determine_rate()
  clk: imx: pllv2: convert from round_rate() to determine_rate()
  clk: imx: pll14xx: convert from round_rate() to determine_rate()
  clk: imx: pfd: convert from round_rate() to determine_rate()
  clk: imx: frac-pll: convert from round_rate() to determine_rate()
  clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
  clk: imx: fixup-div: convert from round_rate() to determine_rate()
  clk: imx: cpu: convert from round_rate() to determine_rate()
  clk: imx: busy: convert from round_rate() to determine_rate()
  clk: imx: composite-93: remove round_rate() in favor of determine_rate()
  clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
  clk: bcm: bcm2835: convert from round_rate() to determine_rate()
  MAINTAINERS: Include clk.py under COMMON CLK FRAMEWORK entry
  clk: ti: Simplify ti_find_clock_provider()
  ...

* clk-pwm:
  clk: pwm: Make use of non-sleeping PWMs
  clk: pwm: Don't reconfigure running PWM at probe time
  clk: pwm: Convert to use pwm_apply_might_sleep()
  clk: pwm: Let .get_duty_cycle() return the real duty cycle

* clk-hw-device:
  clk: tests: add clk_hw_get_dev() and clk_hw_get_of_node() tests
  clk: tests: Make clk_register_clk_parent_data_device_driver() common
  clk: add a clk_hw helpers to get the clock device or device_node

* clk-xilinx:
  clk: xilinx: vcu: Update vcu init/reset sequence
  clk: xilinx: vcu: unregister pll_post only if registered correctly

* clk-adi:
  clk: clk-axi-clkgen: fix coding style issues
  clk: clk-axi-clkgen move to min/max()
  clk: clk-axi-clkgen: detect axi_clkgen_limits at runtime
  include: adi-axi-common: add new helper macros
  include: linux: move adi-axi-common.h out of fpga
  clk: clk-axi-clkgen: make sure to include mod_devicetable.h
  clk: clk-axi-clkgen: fix fpfd_max frequency for zynq
Merge tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2025-07-29T18:13:27+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-29T18:13:27+00:00 0f46f50845ce75bfaba62df0421084d23bb6a72f Pull SoC driver updates from Arnd Bergmann: "Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes" * tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits) bus: del unnecessary init var soc: fsl: qe: convert set_multiple() to returning an integer pinctrl: rp1: use new GPIO line value setter callbacks soc: hisilicon: kunpeng_hccs: Fix incorrect log information dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support memory: tegra: Add Tegra264 MC and EMC support firmware: tegra: bpmp: Fix build failure for tegra264-only config ... 
Pull SoC driver updates from Arnd Bergmann:
 "Changes are all over the place, but very little sticks out as
  noteworthy.

  There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
  I/O chip, along with hooking it up to the pinctrl and clk frameworks.

  The reset controller and memory subsystems have mainly small updates,
  but there are two new reset drivers for the K230 and VC1800B SoCs, and
  new memory driver support for Tegra264.

  The ARM SMCCC and SCMI firmware drivers gain a few more features that
  should help them be supported across more environments. Similarly, the
  SoC specific firmware on Tegra and Qualcomm get minor enhancements and
  chip support.

  In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
  overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
  grow to support more chips, while the Hisilicon, Mediatek and Renesas
  drivers see mostly janitorial fixes"

* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
  bus: del unnecessary init var
  soc: fsl: qe: convert set_multiple() to returning an integer
  pinctrl: rp1: use new GPIO line value setter callbacks
  soc: hisilicon: kunpeng_hccs: Fix incorrect log information
  dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
  dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
  dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
  soc: qcom: socinfo: Add support to retrieve APPSBL build details
  soc: qcom: pmic_glink: fix OF node leak
  soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
  soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
  soc: qcom: socinfo: Add SoC IDs for SM7635 family
  dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
  firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
  firmware: qcom: scm: initialize tzmem before marking SCM as available
  firmware: qcom: scm: take struct device as argument in SHM bridge enable
  firmware: qcom: scm: remove unused arguments from SHM bridge routines
  soc: qcom: rpmh-rsc: Add RSC version 4 support
  memory: tegra: Add Tegra264 MC and EMC support
  firmware: tegra: bpmp: Fix build failure for tegra264-only config
  ...
Merge tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2025-07-29T03:13:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-29T03:13:36+00:00 53edfecef66bfa65882ae065ed1a52f466c88979 Pull power management updates from Rafael Wysocki: "As is tradition, cpufreq is the part with the largest number of updates that include core fixes and cleanups as well as updates of several assorted drivers, but there are also quite a few updates related to system sleep, mostly focused on asynchronous suspend and resume of devices and on making the integration of system suspend and resume with runtime PM easier. Runtime PM is also updated to allow some code duplication in drivers to be eliminated going forward and to work more consistently overall in some cases. Apart from that, there are some driver core updates related to PM domains that should help to address ordering issues with devm_ cleanup routines relying on PM domains, some assorted devfreq updates including core fixes and cleanups, tooling updates, and documentation and MAINTAINERS updates. Specifics: - Fix two initialization ordering issues in the cpufreq core and a governor initialization error path in it, and clean it up (Lifeng Zheng) - Add Granite Rapids support in no-HWP mode to the intel_pstate cpufreq driver (Li RongQing) - Make intel_pstate always use HWP_DESIRED_PERF when operating in the passive mode (Rafael Wysocki) - Allow building the tegra124 cpufreq driver as a module (Aaron Kling) - Do minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas Bulwahn) - Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter, Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng) - Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver (Prashant Malani) - Fix minimum performance state label error in the amd-pstate driver documentation (Shouye Liu) - Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq governor and explain HW coordination influence on it in the documentation (Shashank Balaji) - Fix opencoded for_each_cpu() in idle_state_valid() in the DT cpuidle driver (Yury Norov) - Remove info about non-existing QoS interfaces from the PM QoS documentation (Ulf Hansson) - Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu) - Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan) - Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan) - Simplify the sun8i-a33-mbus devfreq driver by using more devm functions (Uwe Kleine-König) - Fix an index typo in trans_stat() in devfreq (Chanwoo Choi) - Check devfreq governor before using governor->name (Lifeng Zheng) - Remove a redundant devfreq_get_freq_range() call from devfreq_add_device() (Lifeng Zheng) - Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng) - Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng) - Extend the asynchronous suspend and resume of devices to handle suppliers like parents and consumers like children (Rafael Wysocki) - Make pm_runtime_force_resume() work for drivers that set the DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that collaborate with the general ACPI PM domain to set it (Rafael Wysocki) - Add kernel parameter to disable asynchronous suspend/resume of devices (Tudor Ambarus) - Drop redundant might_sleep() calls from some functions in the device suspend/resume core code (Zhongqiu Han) - Fix the handling of monitors connected right before waking up the system from sleep (tuhaowen) - Clean up MAINTAINERS entries for suspend and hibernation (Rafael Wysocki) - Fix error code path in the KEXEC_JUMP flow and drop a redundant pm_restore_gfp_mask() call from it (Rafael Wysocki) - Rearrange suspend/resume error handling in the core device suspend and resume code (Rafael Wysocki) - Fix up white space that does not follow coding style in the hibernation core code (Darshan Rathod) - Document return values of suspend-related API functions in the runtime PM framework (Sakari Ailus) - Mark last busy stamp in multiple autosuspend-related functions in the runtime PM framework and update its documentation (Sakari Ailus) - Take active children into account in pm_runtime_get_if_in_use() for consistency (Rafael Wysocki) - Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu power capping driver (Sivan Zohar-Kotzer) - Add support for the Bartlett Lake platform to the Intel RAPL power capping driver (Qiao Wei) - Add PL4 support for Panther Lake to the intel_rapl_msr power capping driver (Zhang Rui) - Update contact information in the PM ABI docs and maintainer information in the power domains DT binding (Rafael Wysocki) - Update PM header inclusions to follow the IWYU (Include What You Use) principle (Andy Shevchenko) - Add flags to specify power on attach/detach for PM domains, make the driver core detach PM domains in device_unbind_cleanup(), and drop the dev_pm_domain_detach() call from the platform bus type (Claudiu Beznea) - Improve Python binding's Makefile for cpupower (John B. Wyatt IV) - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)" * tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits) cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag PM: docs: Use my kernel.org address in ABI docs and DT bindings PM: hibernate: Fix up white space that does not follow coding style PM: sleep: Rearrange suspend/resume error handling in the core Documentation: amd-pstate:fix minimum performance state label error PM: runtime: Take active children into account in pm_runtime_get_if_in_use() kexec_core: Drop redundant pm_restore_gfp_mask() call kexec_core: Fix error code path in the KEXEC_JUMP flow PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation drivers: cpufreq: add Tegra114 support rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs cpufreq: Exit governor when failed to start old governor cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq() cpufreq: Init policy->rwsem before it may be possibly used cpufreq: Initialize cpufreq-based frequency-invariance later cpufreq: Remove duplicate check in __cpufreq_offline() cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode PM / devfreq: Add HiSilicon uncore frequency scaling driver ... 
Pull power management updates from Rafael Wysocki:
 "As is tradition, cpufreq is the part with the largest number of
  updates that include core fixes and cleanups as well as updates of
  several assorted drivers, but there are also quite a few updates
  related to system sleep, mostly focused on asynchronous suspend and
  resume of devices and on making the integration of system suspend
  and resume with runtime PM easier.

  Runtime PM is also updated to allow some code duplication in drivers
  to be eliminated going forward and to work more consistently overall
  in some cases.

  Apart from that, there are some driver core updates related to PM
  domains that should help to address ordering issues with devm_ cleanup
  routines relying on PM domains, some assorted devfreq updates
  including core fixes and cleanups, tooling updates, and documentation
  and MAINTAINERS updates.

  Specifics:

   - Fix two initialization ordering issues in the cpufreq core and a
     governor initialization error path in it, and clean it up (Lifeng
     Zheng)

   - Add Granite Rapids support in no-HWP mode to the intel_pstate
     cpufreq driver (Li RongQing)

   - Make intel_pstate always use HWP_DESIRED_PERF when operating in the
     passive mode (Rafael Wysocki)

   - Allow building the tegra124 cpufreq driver as a module (Aaron
     Kling)

   - Do minor cleanups for Rust cpufreq and cpumask APIs and fix
     MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
     Bulwahn)

   - Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
     Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)

   - Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
     (Prashant Malani)

   - Fix minimum performance state label error in the amd-pstate driver
     documentation (Shouye Liu)

   - Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
     governor and explain HW coordination influence on it in the
     documentation (Shashank Balaji)

   - Fix opencoded for_each_cpu() in idle_state_valid() in the DT
     cpuidle driver (Yury Norov)

   - Remove info about non-existing QoS interfaces from the PM QoS
     documentation (Ulf Hansson)

   - Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)

   - Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)

   - Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)

   - Simplify the sun8i-a33-mbus devfreq driver by using more devm
     functions (Uwe Kleine-König)

   - Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)

   - Check devfreq governor before using governor->name (Lifeng Zheng)

   - Remove a redundant devfreq_get_freq_range() call from
     devfreq_add_device() (Lifeng Zheng)

   - Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)

   - Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)

   - Extend the asynchronous suspend and resume of devices to handle
     suppliers like parents and consumers like children (Rafael Wysocki)

   - Make pm_runtime_force_resume() work for drivers that set the
     DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
     collaborate with the general ACPI PM domain to set it (Rafael
     Wysocki)

   - Add kernel parameter to disable asynchronous suspend/resume of
     devices (Tudor Ambarus)

   - Drop redundant might_sleep() calls from some functions in the
     device suspend/resume core code (Zhongqiu Han)

   - Fix the handling of monitors connected right before waking up the
     system from sleep (tuhaowen)

   - Clean up MAINTAINERS entries for suspend and hibernation (Rafael
     Wysocki)

   - Fix error code path in the KEXEC_JUMP flow and drop a redundant
     pm_restore_gfp_mask() call from it (Rafael Wysocki)

   - Rearrange suspend/resume error handling in the core device suspend
     and resume code (Rafael Wysocki)

   - Fix up white space that does not follow coding style in the
     hibernation core code (Darshan Rathod)

   - Document return values of suspend-related API functions in the
     runtime PM framework (Sakari Ailus)

   - Mark last busy stamp in multiple autosuspend-related functions in
     the runtime PM framework and update its documentation (Sakari
     Ailus)

   - Take active children into account in pm_runtime_get_if_in_use() for
     consistency (Rafael Wysocki)

   - Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
     power capping driver (Sivan Zohar-Kotzer)

   - Add support for the Bartlett Lake platform to the Intel RAPL power
     capping driver (Qiao Wei)

   - Add PL4 support for Panther Lake to the intel_rapl_msr power
     capping driver (Zhang Rui)

   - Update contact information in the PM ABI docs and maintainer
     information in the power domains DT binding (Rafael Wysocki)

   - Update PM header inclusions to follow the IWYU (Include What You
     Use) principle (Andy Shevchenko)

   - Add flags to specify power on attach/detach for PM domains, make
     the driver core detach PM domains in device_unbind_cleanup(), and
     drop the dev_pm_domain_detach() call from the platform bus type
     (Claudiu Beznea)

   - Improve Python binding's Makefile for cpupower (John B. Wyatt IV)

   - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
     Shenoy)"

* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
  cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
  PM: docs: Use my kernel.org address in ABI docs and DT bindings
  PM: hibernate: Fix up white space that does not follow coding style
  PM: sleep: Rearrange suspend/resume error handling in the core
  Documentation: amd-pstate:fix minimum performance state label error
  PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
  kexec_core: Drop redundant pm_restore_gfp_mask() call
  kexec_core: Fix error code path in the KEXEC_JUMP flow
  PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
  drivers: cpufreq: add Tegra114 support
  rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
  cpufreq: Exit governor when failed to start old governor
  cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
  cpufreq: Init policy->rwsem before it may be possibly used
  cpufreq: Initialize cpufreq-based frequency-invariance later
  cpufreq: Remove duplicate check in __cpufreq_offline()
  cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
  cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
  cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
  PM / devfreq: Add HiSilicon uncore frequency scaling driver
  ...
clk: clocking-wizard: Fix the round rate handling for versal 2025-07-27T06:51:52+00:00 Shubhrajyoti Datta shubhrajyoti.datta@amd.com 2025-06-25T05:41:14+00:00 7f5e9ca0a424af44a708bb4727624d56f83ecffa Fix the `clk_round_rate` implementation for Versal platforms by calling the Versal-specific divider calculation helper. The existing code used the generic divider routine, which results in incorrect round rate. Fixes: 7681f64e6404 ("clk: clocking-wizard: calculate dividers fractional parts") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Link: https://lore.kernel.org/r/20250625054114.28273-1-shubhrajyoti.datta@amd.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
Fix the `clk_round_rate` implementation for Versal platforms by calling
the Versal-specific divider calculation helper. The existing code used
the generic divider routine, which results in incorrect round rate.

Fixes: 7681f64e6404 ("clk: clocking-wizard: calculate dividers fractional parts")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20250625054114.28273-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: Fix typos 2025-07-27T06:49:18+00:00 Bjorn Helgaas bhelgaas@google.com 2025-07-23T20:38:10+00:00 264200cc3a87d5c53bfa817227624fa2bae6b2c3 Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and uses updated). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20250723203819.2910289-1-helgaas@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and
uses updated).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250723203819.2910289-1-helgaas@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>