linux.git/drivers/clocksource, branch v6.6.83 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git x86/i8253: Disable PIT timer 0 when not in use 2025-02-21T12:57:27+00:00 David Woodhouse dwmw@amazon.co.uk 2024-08-02T13:55:54+00:00 c02c52036e6d68341f7e834d83166f3d50b27503 commit 70e6b7d9ae3c63df90a7bba7700e8d5c300c3c60 upstream. Leaving the PIT interrupt running can cause noticeable steal time for virtual guests. The VMM generally has a timer which toggles the IRQ input to the PIC and I/O APIC, which takes CPU time away from the guest. Even on real hardware, running the counter may use power needlessly (albeit not much). Make sure it's turned off if it isn't going to be used. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mhkelley@outlook.com> Link: https://lore.kernel.org/all/20240802135555.564941-1-dwmw2@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 70e6b7d9ae3c63df90a7bba7700e8d5c300c3c60 upstream.

Leaving the PIT interrupt running can cause noticeable steal time for
virtual guests. The VMM generally has a timer which toggles the IRQ input
to the PIC and I/O APIC, which takes CPU time away from the guest. Even
on real hardware, running the counter may use power needlessly (albeit
not much).

Make sure it's turned off if it isn't going to be used.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-1-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of: remove internal arguments from of_property_for_each_u32() 2025-02-08T08:51:51+00:00 Luca Ceresoli luca.ceresoli@bootlin.com 2024-07-24T16:33:06+00:00 914ef7d1a702c510d0b59151a9623f9d20c69d2a [ Upstream commit 9722c3b66e21ff08aec570d02a97d331087fd70f ] The of_property_for_each_u32() macro needs five parameters, two of which are primarily meant as internal variables for the macro itself (in the for() clause). Yet these two parameters are used by a few drivers, and this can be considered misuse or at least bad practice. Now that the kernel uses C11 to build, these two parameters can be avoided by declaring them internally, thus changing this pattern: struct property *prop; const __be32 *p; u32 val; of_property_for_each_u32(np, "xyz", prop, p, val) { ... } to this: u32 val; of_property_for_each_u32(np, "xyz", val) { ... } However two variables cannot be declared in the for clause even with C11, so declare one struct that contain the two variables we actually need. As the variables inside this struct are not meant to be used by users of this macro, give the struct instance the noticeable name "_it" so it is visible during code reviews, helping to avoid new code to use it directly. Most usages are trivially converted as they do not use those two parameters, as expected. The non-trivial cases are: - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the checks had to be replicated in a different way, making code more verbose and somewhat uglier, but I refrained from a full rework to keep as much of the original code untouched having no hardware to test my changes All the changes have been build tested. The few for which I have the hardware have been runtime-tested too. Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Stable-dep-of: 28fa3291cad1 ("clk: fix an OF node reference leak in of_clk_get_parent_name()") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9722c3b66e21ff08aec570d02a97d331087fd70f ]

The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.

Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:

  struct property *prop;
  const __be32 *p;
  u32 val;

  of_property_for_each_u32(np, "xyz", prop, p, val) { ... }

to this:

  u32 val;

  of_property_for_each_u32(np, "xyz", val) { ... }

However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.

Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:

 - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
 - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
   checks had to be replicated in a different way, making code more verbose
   and somewhat uglier, but I refrained from a full rework to keep as much
   of the original code untouched having no hardware to test my changes

All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.

Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Stable-dep-of: 28fa3291cad1 ("clk: fix an OF node reference leak in of_clk_get_parent_name()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/hyperv: Fix hv tsc page based sched_clock for hibernation 2025-01-10T13:31:36+00:00 Naman Jain namjain@linux.microsoft.com 2024-09-17T05:39:17+00:00 a6923798e471570ac1b24086be0a9679f51c3171 commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 upstream. read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is bigger than the variable hv_sched_clock_offset, which is cached during early boot, but depending on the timing this assumption may be false when a hibernated VM starts again (the clock counter starts from 0 again) and is resuming back (Note: hv_init_tsc_clocksource() is not called during hibernation/resume); consequently, read_hv_sched_clock_tsc() may return a negative integer (which is interpreted as a huge positive integer since the return type is u64) and new kernel messages are prefixed with huge timestamps before read_hv_sched_clock_tsc() grows big enough (which typically takes several seconds). Fix the issue by saving the Hyper-V clock counter just before the suspend, and using it to correct the hv_sched_clock_offset in resume. This makes hv tsc page based sched_clock continuous and ensures that post resume, it starts from where it left off during suspend. Override x86_platform.save_sched_clock_state and x86_platform.restore_sched_clock_state routines to correct this as soon as possible. Note: if Invariant TSC is available, the issue doesn't happen because 1) we don't register read_hv_sched_clock_tsc() for sched clock: See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework clocksource and sched clock setup"); 2) the common x86 code adjusts TSC similarly: see __restore_processor_state() -> tsc_verify_tsc_adjust(true) and x86_platform.restore_sched_clock_state(). Cc: stable@vger.kernel.org Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation") Co-developed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 upstream.

read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is
bigger than the variable hv_sched_clock_offset, which is cached during
early boot, but depending on the timing this assumption may be false
when a hibernated VM starts again (the clock counter starts from 0
again) and is resuming back (Note: hv_init_tsc_clocksource() is not
called during hibernation/resume); consequently,
read_hv_sched_clock_tsc() may return a negative integer (which is
interpreted as a huge positive integer since the return type is u64)
and new kernel messages are prefixed with huge timestamps before
read_hv_sched_clock_tsc() grows big enough (which typically takes
several seconds).

Fix the issue by saving the Hyper-V clock counter just before the
suspend, and using it to correct the hv_sched_clock_offset in
resume. This makes hv tsc page based sched_clock continuous and ensures
that post resume, it starts from where it left off during suspend.
Override x86_platform.save_sched_clock_state and
x86_platform.restore_sched_clock_state routines to correct this as soon
as possible.

Note: if Invariant TSC is available, the issue doesn't happen because
1) we don't register read_hv_sched_clock_tsc() for sched clock:
See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework
clocksource and sched clock setup");
2) the common x86 code adjusts TSC similarly: see
__restore_processor_state() ->  tsc_verify_tsc_adjust(true) and
x86_platform.restore_sched_clock_state().

Cc: stable@vger.kernel.org
Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation")
Co-developed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "x86/hyperv: Fix hv tsc page based sched_clock for hibernation" 2025-01-10T13:31:36+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2025-01-10T12:06:34+00:00 c8bc44c5f96172fdaab66a268a53dccc6c7ffa87 This reverts commit 6681113633dc738ec95fe33104843a1e25acef3b which is commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 upstream. The dependant patch before this one caused build errors in the 6.6.y tree, so revert this for now so that we can fix them up properly. Reported-by: Ignat Korchagin <ignat@cloudflare.com> Link: https://lore.kernel.org/r/3DB3A6D3-0D3A-4682-B4FA-407B2D3263B2@cloudflare.com Reported-by: Lars Wendler <wendler.lars@web.de> Link: https://lore.kernel.org/r/20250110103328.0e3906a8@chagall.paradoxon.rec Reported-by: Chris Clayton <chris2553@googlemail.com> Link: https://lore.kernel.org/r/10c7be00-b1f8-4389-801b-fb2d0b22468d@googlemail.com Cc: Dexuan Cui <decui@microsoft.com> Cc: Naman Jain <namjain@linux.microsoft.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit 6681113633dc738ec95fe33104843a1e25acef3b which is
commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 upstream.

The dependant patch before this one caused build errors in the 6.6.y
tree, so revert this for now so that we can fix them up properly.

Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Link: https://lore.kernel.org/r/3DB3A6D3-0D3A-4682-B4FA-407B2D3263B2@cloudflare.com
Reported-by: Lars Wendler <wendler.lars@web.de>
Link: https://lore.kernel.org/r/20250110103328.0e3906a8@chagall.paradoxon.rec
Reported-by: Chris Clayton <chris2553@googlemail.com>
Link: https://lore.kernel.org/r/10c7be00-b1f8-4389-801b-fb2d0b22468d@googlemail.com
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Naman Jain <namjain@linux.microsoft.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86/hyperv: Fix hv tsc page based sched_clock for hibernation 2025-01-09T12:31:49+00:00 Naman Jain namjain@linux.microsoft.com 2024-09-17T05:39:17+00:00 6681113633dc738ec95fe33104843a1e25acef3b [ Upstream commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 ] read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is bigger than the variable hv_sched_clock_offset, which is cached during early boot, but depending on the timing this assumption may be false when a hibernated VM starts again (the clock counter starts from 0 again) and is resuming back (Note: hv_init_tsc_clocksource() is not called during hibernation/resume); consequently, read_hv_sched_clock_tsc() may return a negative integer (which is interpreted as a huge positive integer since the return type is u64) and new kernel messages are prefixed with huge timestamps before read_hv_sched_clock_tsc() grows big enough (which typically takes several seconds). Fix the issue by saving the Hyper-V clock counter just before the suspend, and using it to correct the hv_sched_clock_offset in resume. This makes hv tsc page based sched_clock continuous and ensures that post resume, it starts from where it left off during suspend. Override x86_platform.save_sched_clock_state and x86_platform.restore_sched_clock_state routines to correct this as soon as possible. Note: if Invariant TSC is available, the issue doesn't happen because 1) we don't register read_hv_sched_clock_tsc() for sched clock: See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework clocksource and sched clock setup"); 2) the common x86 code adjusts TSC similarly: see __restore_processor_state() -> tsc_verify_tsc_adjust(true) and x86_platform.restore_sched_clock_state(). Cc: stable@vger.kernel.org Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation") Co-developed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 ]

read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is
bigger than the variable hv_sched_clock_offset, which is cached during
early boot, but depending on the timing this assumption may be false
when a hibernated VM starts again (the clock counter starts from 0
again) and is resuming back (Note: hv_init_tsc_clocksource() is not
called during hibernation/resume); consequently,
read_hv_sched_clock_tsc() may return a negative integer (which is
interpreted as a huge positive integer since the return type is u64)
and new kernel messages are prefixed with huge timestamps before
read_hv_sched_clock_tsc() grows big enough (which typically takes
several seconds).

Fix the issue by saving the Hyper-V clock counter just before the
suspend, and using it to correct the hv_sched_clock_offset in
resume. This makes hv tsc page based sched_clock continuous and ensures
that post resume, it starts from where it left off during suspend.
Override x86_platform.save_sched_clock_state and
x86_platform.restore_sched_clock_state routines to correct this as soon
as possible.

Note: if Invariant TSC is available, the issue doesn't happen because
1) we don't register read_hv_sched_clock_tsc() for sched clock:
See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework
clocksource and sched clock setup");
2) the common x86 code adjusts TSC similarly: see
__restore_processor_state() ->  tsc_verify_tsc_adjust(true) and
x86_platform.restore_sched_clock_state().

Cc: stable@vger.kernel.org
Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation")
Co-developed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/timer-ti-dm: Fix child node refcount handling 2024-12-09T09:31:51+00:00 Javier Carrasco javier.carrasco.cruz@gmail.com 2024-10-31T12:54:23+00:00 ecbc50474769971c2d7268d1ac8e72eb22d78bd7 [ Upstream commit e5cfc0989d9a2849c51c720a16b90b2c061a1aeb ] of_find_compatible_node() increments the node's refcount, and it must be decremented again with a call to of_node_put() when the pointer is no longer required to avoid leaking the resource. Instead of adding the missing calls to of_node_put() in all execution paths, use the cleanup attribute for 'arm_timer' by means of the __free() macro, which automatically calls of_node_put() when the variable goes out of scope. Fixes: 25de4ce5ed02 ("clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20241031-timer-ti-dm-systimer-of_node_put-v3-1-063ee822b73a@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e5cfc0989d9a2849c51c720a16b90b2c061a1aeb ]

of_find_compatible_node() increments the node's refcount, and it must be
decremented again with a call to of_node_put() when the pointer is no
longer required to avoid leaking the resource.

Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'arm_timer' by means of the
__free() macro, which automatically calls of_node_put() when the
variable goes out of scope.

Fixes: 25de4ce5ed02 ("clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241031-timer-ti-dm-systimer-of_node_put-v3-1-063ee822b73a@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers:sp804: Make user selectable 2024-12-09T09:31:51+00:00 Mark Brown broonie@kernel.org 2024-10-01T11:23:56+00:00 3ba257d80ffa0b4773712b404f4be6a25db330e5 [ Upstream commit 0309f714a0908e947af1c902cf6a330cb593e75e ] The sp804 is currently only user selectable if COMPILE_TEST, this was done by commit dfc82faad725 ("clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804") in order to avoid it being spuriously offered on platforms that won't have the hardware since it's generally only seen on Arm based platforms. This config is overly restrictive, while platforms that rely on the SP804 do select it in their Kconfig there are others such as the Arm fast models which have a SP804 available but currently unused by Linux. Relax the dependency to allow it to be user selectable on arm and arm64 to avoid surprises and in case someone comes up with a use for extra timer hardware. Fixes: dfc82faad725 ("clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804") Reported-by: Ross Burton <ross.burton@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241001-arm64-vexpress-sp804-v3-1-0a2d3f7883e4@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0309f714a0908e947af1c902cf6a330cb593e75e ]

The sp804 is currently only user selectable if COMPILE_TEST, this was
done by commit dfc82faad725 ("clocksource/drivers/sp804: Add
COMPILE_TEST to CONFIG_ARM_TIMER_SP804") in order to avoid it being
spuriously offered on platforms that won't have the hardware since it's
generally only seen on Arm based platforms.  This config is overly
restrictive, while platforms that rely on the SP804 do select it in
their Kconfig there are others such as the Arm fast models which have a
SP804 available but currently unused by Linux.  Relax the dependency to
allow it to be user selectable on arm and arm64 to avoid surprises and
in case someone comes up with a use for extra timer hardware.

Fixes: dfc82faad725 ("clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804")
Reported-by: Ross Burton <ross.burton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-vexpress-sp804-v3-1-0a2d3f7883e4@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init() 2024-10-04T14:29:04+00:00 Ankit Agrawal agrawal.ag.ankit@gmail.com 2024-07-13T09:57:13+00:00 27106b0a292eee1fe321932f0a429eacce030a0a [ Upstream commit ca140a0dc0a18acd4653b56db211fec9b2339986 ] Add the missing iounmap() when clock frequency fails to get read by the of_property_read_u32() call, or if the call to msm_timer_init() fails. Fixes: 6e3321631ac2 ("ARM: msm: Add DT support to msm_timer") Signed-off-by: Ankit Agrawal <agrawal.ag.ankit@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240713095713.GA430091@bnew-VirtualBox Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ca140a0dc0a18acd4653b56db211fec9b2339986 ]

Add the missing iounmap() when clock frequency fails to get read by the
of_property_read_u32() call, or if the call to msm_timer_init() fails.

Fixes: 6e3321631ac2 ("ARM: msm: Add DT support to msm_timer")
Signed-off-by: Ankit Agrawal <agrawal.ag.ankit@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240713095713.GA430091@bnew-VirtualBox
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
clocksource/drivers/timer-of: Remove percpu irq related code 2024-09-12T09:11:42+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2024-08-19T10:03:35+00:00 7eeb7189c4d4b258fc80435a98181735e710f02f commit 471ef0b5a8aaca4296108e756b970acfc499ede4 upstream. GCC's named address space checks errors out with: drivers/clocksource/timer-of.c: In function ‘timer_of_irq_exit’: drivers/clocksource/timer-of.c:29:46: error: passing argument 2 of ‘free_percpu_irq’ from pointer to non-enclosed address space 29 | free_percpu_irq(of_irq->irq, clkevt); | ^~~~~~ In file included from drivers/clocksource/timer-of.c:8: ./include/linux/interrupt.h:201:43: note: expected ‘__seg_gs void *’ but argument is of type ‘struct clock_event_device *’ 201 | extern void free_percpu_irq(unsigned int, void __percpu *); | ^~~~~~~~~~~~~~~ drivers/clocksource/timer-of.c: In function ‘timer_of_irq_init’: drivers/clocksource/timer-of.c:74:51: error: passing argument 4 of ‘request_percpu_irq’ from pointer to non-enclosed address space 74 | np->full_name, clkevt) : | ^~~~~~ ./include/linux/interrupt.h:190:56: note: expected ‘__seg_gs void *’ but argument is of type ‘struct clock_event_device *’ 190 | const char *devname, void __percpu *percpu_dev_id) Sparse warns about: timer-of.c:29:46: warning: incorrect type in argument 2 (different address spaces) timer-of.c:29:46: expected void [noderef] __percpu * timer-of.c:29:46: got struct clock_event_device *clkevt timer-of.c:74:51: warning: incorrect type in argument 4 (different address spaces) timer-of.c:74:51: expected void [noderef] __percpu *percpu_dev_id timer-of.c:74:51: got struct clock_event_device *clkevt It appears the code is incorrect as reported by Uros Bizjak: "The referred code is questionable as it tries to reuse the clkevent pointer once as percpu pointer and once as generic pointer, which should be avoided." This change removes the percpu related code as no drivers is using it. [Daniel: Fixed the description] Fixes: dc11bae785295 ("clocksource/drivers: Add timer-of common init routine") Reported-by: Uros Bizjak <ubizjak@gmail.com> Tested-by: Uros Bizjak <ubizjak@gmail.com> Link: https://lore.kernel.org/r/20240819100335.2394751-1-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 471ef0b5a8aaca4296108e756b970acfc499ede4 upstream.

GCC's named address space checks errors out with:

drivers/clocksource/timer-of.c: In function ‘timer_of_irq_exit’:
drivers/clocksource/timer-of.c:29:46: error: passing argument 2 of
‘free_percpu_irq’ from pointer to non-enclosed address space
  29 |                 free_percpu_irq(of_irq->irq, clkevt);
     |                                              ^~~~~~
In file included from drivers/clocksource/timer-of.c:8:
./include/linux/interrupt.h:201:43: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
 201 | extern void free_percpu_irq(unsigned int, void __percpu *);
     |                                           ^~~~~~~~~~~~~~~
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_init’:
drivers/clocksource/timer-of.c:74:51: error: passing argument 4 of
‘request_percpu_irq’ from pointer to non-enclosed address space
  74 |                                    np->full_name, clkevt) :
     |                                                   ^~~~~~
./include/linux/interrupt.h:190:56: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
 190 |                    const char *devname, void __percpu *percpu_dev_id)

Sparse warns about:

timer-of.c:29:46: warning: incorrect type in argument 2 (different address spaces)
timer-of.c:29:46:    expected void [noderef] __percpu *
timer-of.c:29:46:    got struct clock_event_device *clkevt
timer-of.c:74:51: warning: incorrect type in argument 4 (different address spaces)
timer-of.c:74:51:    expected void [noderef] __percpu *percpu_dev_id
timer-of.c:74:51:    got struct clock_event_device *clkevt

It appears the code is incorrect as reported by Uros Bizjak:

"The referred code is questionable as it tries to reuse
the clkevent pointer once as percpu pointer and once as generic
pointer, which should be avoided."

This change removes the percpu related code as no drivers is using it.

[Daniel: Fixed the description]

Fixes: dc11bae785295 ("clocksource/drivers: Add timer-of common init routine")
Reported-by: Uros Bizjak <ubizjak@gmail.com>
Tested-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20240819100335.2394751-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clocksource/drivers/imx-tpm: Fix next event not taking effect sometime 2024-09-12T09:11:41+00:00 Jacky Bai ping.bai@nxp.com 2024-07-25T19:33:55+00:00 444c3927a0c1de58abfa6c4df9b18080bb078bdf commit 3d5c2f8e75a55cfb11a85086c71996af0354a1fb upstream. The value written into the TPM CnV can only be updated into the hardware when the counter increases. Additional writes to the CnV write buffer are ignored until the register has been updated. Therefore, we need to check if the CnV has been updated before continuing. This may require waiting for 1 counter cycle in the worst case. Cc: stable@vger.kernel.org Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support") Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240725193355.1436005-2-Frank.Li@nxp.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3d5c2f8e75a55cfb11a85086c71996af0354a1fb upstream.

The value written into the TPM CnV can only be updated into the hardware
when the counter increases. Additional writes to the CnV write buffer are
ignored until the register has been updated. Therefore, we need to check
if the CnV has been updated before continuing. This may require waiting for
1 counter cycle in the worst case.

Cc: stable@vger.kernel.org
Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-2-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>