The commit referenced in the Fixes tag removed the 'break' from the else
branch in qcom_rng_read(), causing an infinite loop whenever 'max' is
not a multiple of WORD_SZ. This can be reproduced e.g. by running:

    kcapi-rng -b 67 >/dev/null

There are many ways to fix this without adding back the 'break', but
they all seem more awkward than simply adding it back, so do just that.

Tested on a machine with Qualcomm Amberwing processor.

Fixes: a680b1832ced ("crypto: qcom-rng - ensure buffer for generate is completely filled")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull virtio updates from Michael Tsirkin:

 - vdpa generic device type support

 - more virtio hardening for broken devices (but on the same theme,
   revert some virtio hotplug hardening patches - they were misusing
   some interrupt flags and had to be reverted)

 - RSS support in virtio-net

 - max device MTU support in mlx5 vdpa

 - akcipher support in virtio-crypto

 - shared IRQ support in ifcvf vdpa

 - a minor performance improvement in vhost

 - enable virtio mem for ARM64

 - beginnings of advance dma support

 - cleanups, fixes all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits)
  vdpa/mlx5: Avoid processing works if workqueue was destroyed
  vhost: handle error while adding split ranges to iotlb
  vdpa: support exposing the count of vqs to userspace
  vdpa: change the type of nvqs to u32
  vdpa: support exposing the config size to userspace
  vdpa/mlx5: re-create forwarding rules after mac modified
  virtio: pci: check bar values read from virtio config space
  Revert "virtio_pci: harden MSI-X interrupts"
  Revert "virtio-pci: harden INTX interrupts"
  drivers/net/virtio_net: Added RSS hash report control.
  drivers/net/virtio_net: Added RSS hash report.
  drivers/net/virtio_net: Added basic RSS support.
  drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
  virtio: use virtio_device_ready() in virtio_device_restore()
  tools/virtio: compile with -pthread
  tools/virtio: fix after premapped buf support
  virtio_ring: remove flags check for unmap packed indirect desc
  virtio_ring: remove flags check for unmap split indirect desc
  virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed()
  net/mlx5: Add support for configuring max device MTU
  ...

Pull crypto fixes from Herbert Xu:

 - Missing Kconfig dependency on arm that leads to boot failure

 - x86 SLS fixes

 - Reference leak in the stm32 driver

* tag 'v5.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/sm3 - Fixup SLS
  crypto: x86/poly1305 - Fixup SLS
  crypto: x86/chacha20 - Avoid spurious jumps to other functions
  crypto: stm32 - fix reference leak in stm32_crc_remove
  crypto: arm/aes-neonbs-cbc - Select generic cbc and aes

Suggested by Gonglei, rename virtio_crypto_algs.c to
virtio_crypto_skcipher_algs.c. Also minor changes for function name.
Thus the function of source files get clear: skcipher services in
virtio_crypto_skcipher_algs.c and akcipher services in
virtio_crypto_akcipher_algs.c.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20220302033917.1295334-5-pizhenwei@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>

Support rsa & pkcs1pad(rsa,sha1) with priority 150.

Test with QEMU built-in backend, it works fine.
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
  - both public key & private key
  - create/close session
  - encrypt/decrypt/sign/verify basic driver operation
  - also test with kernel crypto layer(pkey add/query)

All the cases work fine.

rm -rf *.der *.pem *.pfx
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=226

openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org"
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der

PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID

keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0

echo "Enc with priv key..."
keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
echo "Dec with pub key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec

echo "Sign with priv key..."
keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
echo "Verify with pub key..."
keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1

echo "Enc with pub key..."
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
echo "Dec with priv key..."
keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
cmp /tmp/data /tmp/dec

echo "Verify with pub key..."
keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1

[1 compiling warning during development]
Reported-by: kernel test robot <lkp@intel.com>

Co-developed-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20220302033917.1295334-4-pizhenwei@bytedance.com
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org> #Kconfig tweaks
Link: https://lore.kernel.org/r/20220308205309.2192502-1-nathan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stm32_crc_remove, so we should fix it.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull VFIO updates from Alex Williamson:

 - Introduce new device migration uAPI and implement device specific
   mlx5 vfio-pci variant driver supporting new protocol (Jason
   Gunthorpe, Yishai Hadas, Leon Romanovsky)

 - New HiSilicon acc vfio-pci variant driver, also supporting migration
   interface (Shameer Kolothum, Longfang Liu)

 - D3hot fixes for vfio-pci-core (Abhishek Sahu)

 - Document new vfio-pci variant driver acceptance criteria
   (Alex Williamson)

 - Fix UML build unresolved ioport_{un}map() functions
   (Alex Williamson)

 - Fix MAINTAINERS due to header movement (Lukas Bulwahn)

* tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits)
  vfio-pci: Provide reviewers and acceptance criteria for variant drivers
  MAINTAINERS: adjust entry for header movement in hisilicon qm driver
  hisi_acc_vfio_pci: Use its own PCI reset_done error handler
  hisi_acc_vfio_pci: Add support for VFIO live migration
  crypto: hisilicon/qm: Set the VF QM state register
  hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver
  hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region
  hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices
  hisi_acc_qm: Move VF PCI device IDs to common header
  crypto: hisilicon/qm: Move few definitions to common header
  crypto: hisilicon/qm: Move the QM header to include/linux
  vfio/mlx5: Fix to not use 0 as NULL pointer
  PCI/IOV: Fix wrong kernel-doc identifier
  vfio/mlx5: Use its own PCI reset_done error handler
  vfio/pci: Expose vfio_pci_core_aer_err_detected()
  vfio/mlx5: Implement vfio_pci driver for mlx5 devices
  vfio/mlx5: Expose migration commands over mlx5 device
  vfio: Remove migration protocol v1 documentation
  vfio: Extend the device migration protocol with RUNNING_P2P
  vfio: Define device migration protocol v2
  ...

Pull flexible-array transformations from Gustavo Silva:
 "Treewide patch that replaces zero-length arrays with flexible-array
  members.

  This has been baking in linux-next for a whole development cycle"

* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  treewide: Replace zero-length arrays with flexible-array members

Pull ARM SoC updates from Arnd Bergmann:
 "SoC specific code is generally used for older platforms that don't
  (yet) use device tree to do the same things.

   - Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
     from NXP. At the moment this is still incomplete as other portions
     are merged through different trees.

   - Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
     gets removed, now the Arm NOMMU platforms are limited to the
     Cortex-M family of microcontrollers

   - Two old PXA boards get removed, along with corresponding driver
     bits.

   - Continued cleanup of the Intel IXP4xx platforms, removing some
     remnants of the old board files.

   - Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung

   - CPU idle support for AT91

   - A system controller driver for Polarfire"

* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: remove support for NOMMU ARMv4/v5
  ARM: PXA: fix up decompressor code
  soc: microchip: make mpfs_sys_controller_put static
  ARM: pxa: remove Intel Imote2 and Stargate 2 boards
  ARM: mmp: Fix failure to remove sram device
  ARM: mstar: Select ARM_ERRATA_814220
  soc: add microchip polarfire soc system controller
  ARM: at91: Kconfig: select PM_OPP
  ARM: at91: PM: add cpu idle support for sama7g5
  ARM: at91: ddr: fix typo to align with datasheet naming
  ARM: at91: ddr: align macro definitions
  ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
  ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
  ARM: ixp4xx: Drop all common code
  ARM: ixp4xx: Drop custom DMA coherency and bouncing
  ARM: ixp4xx: Remove feature bit accessors
  net: ixp4xx_hss: Check features using syscon
  net: ixp4xx_eth: Drop platform data support
  soc: ixp4xx-npe: Access syscon regs using regmap
  soc: ixp4xx: Add features from regmap helper
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - hwrng core now credits for low-quality RNG devices.

  Algorithms:
   - Optimisations for neon aes on arm/arm64.
   - Add accelerated crc32_be on arm64.
   - Add ffdheXYZ(dh) templates.
   - Disallow hmac keys < 112 bits in FIPS mode.
   - Add AVX assembly implementation for sm3 on x86.

  Drivers:
   - Add missing local_bh_disable calls for crypto_engine callback.
   - Ensure BH is disabled in crypto_engine callback path.
   - Fix zero length DMA mappings in ccree.
   - Add synchronization between mailbox accesses in octeontx2.
   - Add Xilinx SHA3 driver.
   - Add support for the TDES IP available on sama7g5 SoC in atmel"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits)
  crypto: xilinx - Turn SHA into a tristate and allow COMPILE_TEST
  MAINTAINERS: update HPRE/SEC2/TRNG driver maintainers list
  crypto: dh - Remove the unused function dh_safe_prime_dh_alg()
  hwrng: nomadik - Change clk_disable to clk_disable_unprepare
  crypto: arm64 - cleanup comments
  crypto: qat - fix initialization of pfvf rts_map_msg structures
  crypto: qat - fix initialization of pfvf cap_msg structures
  crypto: qat - remove unneeded assignment
  crypto: qat - disable registration of algorithms
  crypto: hisilicon/qm - fix memset during queues clearing
  crypto: xilinx: prevent probing on non-xilinx hardware
  crypto: marvell/octeontx - Use swap() instead of open coding it
  crypto: ccree - Fix use after free in cc_cipher_exit()
  crypto: ccp - ccp_dmaengine_unregister release dma channels
  crypto: octeontx2 - fix missing unlock
  hwrng: cavium - fix NULL but dereferenced coccicheck error
  crypto: cavium/nitrox - don't cast parameter in bit operations
  crypto: vmx - add missing dependencies
  MAINTAINERS: Add maintainer for Xilinx ZynqMP SHA3 driver
  crypto: xilinx - Add Xilinx SHA3 driver
  ...