Function get_zeroed_page() returns a NULL pointer if there is no enough
memory. In function extcon_sync(), it returns 0 if the call to
get_zeroed_page() fails. The return value 0 indicates success in the
context, which is incosistent with the execution status. This patch
fixes the bug by returning -ENOMEM.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188611

Signed-off-by: Pan Bian <bianpan2016@163.com>
Fixes: a580982f0836e
Cc: stable <stable@vger.kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull sound updates from Takashi Iwai:
 "No dramatic changes are found in this development cycle, but as usual,
  many commits are applied in a wide range of drivers.

  Most of big changes are in ASoC, where a few bits of framework work
  and quite a lot of cleanups and improvements to existing code have
  been done. The rest are usual stuff, a few HD-audio and USB-audio
  quirks and fixes, as well as the drop of kthread usages in the whole
  subsystem.

  Below are some highlights:

  ASoC:
   - support for stereo DAPM controls
   - some initial work on the of-graph sound card
   - regmap conversions of the remaining AC'97 drivers
   - a new version of the topology ABI; this should be backward
     compatible
   - updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona,
     Intel skylake, atom-sst
   - new drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and
     Realtek RT5665

  USB-audio:
   - yet another race fix at disconnection
   - tolerated packet size calculation for some Android devices
   - quirks for Axe-Fx II, QuickCam, TEAC 501/503

  HD-audio:
   - improvement of Dell pin fixup mapping
   - quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic

  Misc:
   - replace all kthread usages with simple works"

* tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (296 commits)
  ALSA: hiface: Fix M2Tech hiFace driver sampling rate change
  ALSA: usb-audio: Eliminate noise at the start of DSD playback.
  ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC
  ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path
  ASoC: topology: avoid uninitialized kcontrol_type
  ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks
  ALSA: usb-audio: add implicit fb quirk for Axe-Fx II
  ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT define
  ASoC: zte: spdif and i2s drivers are not zx296702 specific
  ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting
  ASoC: rsnd: enable/disable ADG when suspend/resume timing
  ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params
  ALSA: cs46xx: add a new line
  ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture
  ASoC: nau8825: disable sinc filter for high THD of ADC
  ALSA: usb-audio: more tolerant packetsize
  ALSA: usb-audio: avoid setting of sample rate multiple times on bus
  ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting
  ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO
  ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq
  ...

The name of a codec pin can have an optional prefix string, which is
defined by the SoC machine driver. The snd_soc_dapm_x_pin functions
take the fully-specified name including the prefix and so the existing
code would fail to find the pin if the audio machine driver had added
a prefix.

Switch to using the snd_soc_component_x_pin equivalent functions that
take a specified SoC component and automatically add the name prefix to
the provided pin name.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Driver can now work with both ID and VBUS pins or either one of
them.

There can be the following 3 cases

1) Both ID and VBUS GPIOs are available:

ID = LOW -> USB_HOST active, USB inactive
ID = HIGH -> USB_HOST inactive, USB state is same as VBUS.

2) Only ID GPIO is available:

ID = LOW -> USB_HOST active, USB inactive
ID = HIGH -> USB_HOST inactive, USB active

3) Only VBUS GPIO is available:

VBUS = LOW -> USB_HOST inactive, USB inactive
VBUS = HIGH -> USB_HOST inactive, USB active

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

The driver was changed after submission to use the new style APIs
like extcon_set_state(). Unfortunately, that only sets the state,
and doesn't notify any consumers that the cable state has
changed. Use extcon_set_state_sync() here instead so that we
notify cable consumers of the state change. This fixes USB
host-device role switching on the db8074 platform.

Fixes: 38085c987f52 ("extcon: Add support for qcom SPMI PMIC USB id detection hardware")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Conflicts:
	drivers/extcon/extcon-adc-jack.c
	drivers/extcon/extcon-arizona.c
	drivers/extcon/extcon-gpio.c
	include/linux/extcon.h

Some Qualcomm PMICs have a misc device that performs USB id pin
detection via an interrupt. When the interrupt triggers, we
should read the interrupt line to see if it has gone high or low.
If the interrupt is low then the ID pin is grounded, and if the
interrupt is high then the ID pin is being held high.

Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
[cw00.choi: Edited the driver description and added the author information]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

This patch alters the renamed extcon API to set the state of the external
connectors instead of deprecated extcon_set_cable_state_().

Because the patch[1] modifies the function name to maintain the function
naming pattern.
- extcon_set_cable_state_() -> extcon_set_state_sync()
- extcon_get_cable_state_() -> extcon_get_state()

[1] https://lkml.org/lkml/2016/8/4/729
- extcon: Rename the extcon_set/get_state() to maintain the function naming pattern

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Roger Quadros <rogerq@ti.com>

This patch fixes the spelling mistake in dev_dbg messages.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
[cw00.choi: Modify the patch title/description]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>