Pull EFI updates from Borislav Petkov:
 "These got delayed due to a last minute ia64 build issue which got
  fixed in the meantime.

  EFI updates collected by Ard Biesheuvel:

   - Don't move BSS section around pointlessly in the x86 decompressor

   - Refactor helper for discovering the EFI secure boot mode

   - Wire up EFI secure boot to IMA for arm64

   - Some fixes for the capsule loader

   - Expose the RT_PROP table via the EFI test module

   - Relax DT and kernel placement restrictions on ARM

  with a few followup fixes:

   - fix the build breakage on IA64 caused by recent capsule loader
     changes

   - suppress a type mismatch build warning in the expansion of
     EFI_PHYS_ALIGN on ARM"

* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
  efi: ia64: disable the capsule loader
  efi: stub: get rid of efi_get_max_fdt_addr()
  efi/efi_test: read RuntimeServicesSupported
  efi: arm: reduce minimum alignment of uncompressed kernel
  efi: capsule: clean scatter-gather entries from the D-cache
  efi: capsule: use atomic kmap for transient sglist mappings
  efi: x86/xen: switch to efi_get_secureboot_mode helper
  arm64/ima: add ima_arch support
  ima: generalize x86/EFI arch glue for other EFI architectures
  efi: generalize efi_get_secureboot
  efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
  efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
  efi/libstub/x86: simplify efi_is_native()

Pull KVM updates from Paolo Bonzini:
 "Much x86 work was pushed out to 5.12, but ARM more than made up for it.

  ARM:
   - PSCI relay at EL2 when "protected KVM" is enabled
   - New exception injection code
   - Simplification of AArch32 system register handling
   - Fix PMU accesses when no PMU is enabled
   - Expose CSV3 on non-Meltdown hosts
   - Cache hierarchy discovery fixes
   - PV steal-time cleanups
   - Allow function pointers at EL2
   - Various host EL2 entry cleanups
   - Simplification of the EL2 vector allocation

  s390:
   - memcg accouting for s390 specific parts of kvm and gmap
   - selftest for diag318
   - new kvm_stat for when async_pf falls back to sync

  x86:
   - Tracepoints for the new pagetable code from 5.10
   - Catch VFIO and KVM irqfd events before userspace
   - Reporting dirty pages to userspace with a ring buffer
   - SEV-ES host support
   - Nested VMX support for wait-for-SIPI activity state
   - New feature flag (AVX512 FP16)
   - New system ioctl to report Hyper-V-compatible paravirtualization features

  Generic:
   - Selftest improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
  KVM: SVM: fix 32-bit compilation
  KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
  KVM: SVM: Provide support to launch and run an SEV-ES guest
  KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
  KVM: SVM: Provide support for SEV-ES vCPU loading
  KVM: SVM: Provide support for SEV-ES vCPU creation/loading
  KVM: SVM: Update ASID allocation to support SEV-ES guests
  KVM: SVM: Set the encryption mask for the SVM host save area
  KVM: SVM: Add NMI support for an SEV-ES guest
  KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
  KVM: SVM: Do not report support for SMM for an SEV-ES guest
  KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
  KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
  KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
  KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
  KVM: SVM: Add support for EFER write traps for an SEV-ES guest
  KVM: SVM: Support string IO operations for an SEV-ES guest
  KVM: SVM: Support MMIO for an SEV-ES guest
  KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
  KVM: SVM: Create trace events for VMGEXIT processing
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "There are a couple of subsystems maintained by other people that merge
  their drivers through the SoC tree, those changes include:

   - The SCMI firmware framework gains support for sensor notifications
     and for controlling voltage domains.

   - A large update for the Tegra memory controller driver, integrating
     it better with the interconnect framework

   - The memory controller subsystem gains support for Mediatek MT8192

   - The reset controller framework gains support for sharing pulsed
     resets

  For Soc specific drivers in drivers/soc, the main changes are

   - The Allwinner/sunxi MBUS gets a rework for the way it handles
     dma_map_ops and offsets between physical and dma address spaces.

   - An errata fix plus some cleanups for Freescale Layerscape SoCs

   - A cleanup for renesas drivers regarding MMIO accesses.

   - New SoC specific drivers for Mediatek MT8192 and MT8183 power
     domains

   - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
     identification.

   - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
     SDX55.

   - A rework of the TI AM33xx 'genpd' power domain support to use
     information from DT instead of platform data

   - Support for TI AM64x SoCs

   - Allow building some Amlogic drivers as modules instead of built-in

  Finally, there are numerous cleanups and smaller bug fixes for
  Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
  Renesas, and Xilinx SoCs"

* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
  soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
  firmware: xilinx: Properly align function parameter
  firmware: xilinx: Add a blank line after function declaration
  firmware: xilinx: Remove additional newline
  firmware: xilinx: Fix kernel-doc warnings
  firmware: xlnx-zynqmp: fix compilation warning
  soc: xilinx: vcu: add missing register NUM_CORE
  soc: xilinx: vcu: use vcu-settings syscon registers
  dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
  soc: xilinx: vcu: drop useless success message
  clk: samsung: mark PM functions as __maybe_unused
  soc: samsung: exynos-chipid: initialize later - with arch_initcall
  soc: samsung: exynos-chipid: order list of SoCs by name
  memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
  memory: ti-emif-sram: only build for ARMv7
  memory: tegra30: Support interconnect framework
  memory: tegra20: Support hardware versioning and clean up OPP table initialization
  dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
  soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
  reset-controller: ti: force the write operation when assert or deassert
  ...

Pull power management updates from Rafael Wysocki:
 "These update cpufreq (core and drivers), cpuidle (polling state
  implementation and the PSCI driver), the OPP (operating performance
  points) framework, devfreq (core and drivers), the power capping RAPL
  (Running Average Power Limit) driver, the Energy Model support, the
  generic power domains (genpd) framework, the ACPI device power
  management, the core system-wide suspend code and power management
  utilities.

  Specifics:

   - Use local_clock() instead of jiffies in the cpufreq statistics to
     improve accuracy (Viresh Kumar).

   - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
     drivers (Viresh Kumar).

   - Clean up the cpufreq core, the intel_pstate driver and the
     schedutil cpufreq governor (Rafael Wysocki).

   - Fix up error code paths in the sti-cpufreq and mediatek cpufreq
     drivers (Yangtao Li, Qinglang Miao).

   - Fix cpufreq_online() to return error codes instead of success (0)
     in all cases when it fails (Wang ShaoBo).

   - Add mt8167 support to the mediatek cpufreq driver and blacklist
     mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).

   - Modify the tegra194 cpufreq driver to always return values from the
     frequency table as the current frequency and clean up that driver
     (Sumit Gupta, Jon Hunter).

   - Modify the arm_scmi cpufreq driver to allow it to discover the
     power scale present in the performance protocol and provide this
     information to the Energy Model (Lukasz Luba).

   - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
     Rohár).

   - Clean up the CPPC cpufreq driver (Ionela Voinescu).

   - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
     Bergmann).

   - Rework the poling interval selection for the polling state in
     cpuidle (Mel Gorman).

   - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
     (Ulf Hansson).

   - Modify the OPP framework to support empty (node-less) OPP tables in
     DT for passing dependency information (Nicola Mazzucato).

   - Fix potential lockdep issue in the OPP core and clean up the OPP
     core (Viresh Kumar).

   - Modify dev_pm_opp_put_regulators() to accept a NULL argument and
     update its users accordingly (Viresh Kumar).

   - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).

   - Add support for governor feature flags to devfreq, make devfreq
     sysfs file permissions depend on the governor and clean up the
     devfreq core (Chanwoo Choi).

   - Clean up the tegra20 devfreq driver and deprecate it to allow
     another driver based on EMC_STAT to be used instead of it (Dmitry
     Osipenko).

   - Add interconnect support to the tegra30 devfreq driver, allow it to
     take the interconnect and OPP information from DT and clean it up
     (Dmitry Osipenko).

   - Add interconnect support to the exynos-bus devfreq driver along
     with interconnect properties documentation (Sylwester Nawrocki).

   - Add suport for AMD Fam17h and Fam19h processors to the RAPL power
     capping driver (Victor Ding, Kim Phillips).

   - Fix handling of overly long constraint names in the powercap
     framework (Lukasz Luba).

   - Fix the wakeup configuration handling for bridges in the ACPI
     device power management core (Rafael Wysocki).

   - Add support for using an abstract scale for power units in the
     Energy Model (EM) and document it (Lukasz Luba).

   - Add em_cpu_energy() micro-optimization to the EM (Pavankumar
     Kondeti).

   - Modify the generic power domains (genpd) framwework to support
     suspend-to-idle (Ulf Hansson).

   - Fix creation of debugfs nodes in genpd (Thierry Strudel).

   - Clean up genpd (Lina Iyer).

   - Clean up the core system-wide suspend code and make it print driver
     flags for devices with debug enabled (Alex Shi, Patrice Chotard,
     Chen Yu).

   - Modify the ACPI system reboot code to make it prepare for system
     power off to avoid confusing the platform firmware (Kai-Heng Feng).

   - Update the pm-graph (multiple changes, mostly usability-related)
     and cpupower (online and offline CPU information support) PM
     utilities (Todd Brandt, Brahadambal Srinivasan)"

* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
  cpufreq: Fix cpufreq_online() return value on errors
  cpufreq: Fix up several kerneldoc comments
  cpufreq: stats: Use local_clock() instead of jiffies
  cpufreq: schedutil: Simplify sugov_update_next_freq()
  cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
  PM: domains: create debugfs nodes when adding power domains
  opp: of: Allow empty opp-table with opp-shared
  dt-bindings: opp: Allow empty OPP tables
  media: venus: dev_pm_opp_put_*() accepts NULL argument
  drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
  drm/lima: dev_pm_opp_put_*() accepts NULL argument
  PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
  opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
  opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
  cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
  opp: Reduce the size of critical section in _opp_kref_release()
  PM / EM: Micro optimization in em_cpu_energy
  cpufreq: arm_scmi: Discover the power scale in performance protocol
  ...

Pull regulator updates from Mark Brown:
 "This has been a quiet release for the regulator API, a few new drivers
  and the usual fixes and cleanup traffic but not much else going on:

   - Optimisations for the handling of voltage enumeration, especially
     with sparse selector sets, from Claudiu Beznea.

   - Support for several ARM SCMI regulators, Dialog DA9121, NXP PF8x00,
     Qualcomm PMX55, PM8350 and PM8350c

  The addition of the SCMI regulator driver (which controls regulators
  via system firmware) means that we've pulled in the support for the
  underlying firmware operations from the firmware tree"

* tag 'regulator-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (53 commits)
  regulator: mc13892-regulator: convert comma to semicolon
  regulator: pfuze100: Convert the driver to DT-only
  regulator: max14577: Add proper module aliases strings
  regulator: da9121: Potential Oops in da9121_assign_chip_model()
  regulator: da9121: Fix index used for DT property
  regulator: da9121: Remove uninitialised string variable
  regulator: axp20x: Fix DLDO2 voltage control register mask for AXP22x
  regulator: qcom-rpmh: Add support for PM8350/PM8350c
  regulator: dt-bindings: Add PM8350x compatibles
  regulator: da9121: include linux/gpio/consumer.h
  regulator: da9121: Mark some symbols with static keyword
  regulator: da9121: Request IRQ directly and free in release function to avoid masking race
  regulator: da9121: add interrupt support
  regulator: da9121: add mode support
  regulator: da9121: add current support
  regulator: da9121: Update registration to support multiple buck variants
  regulator: da9121: Add support for device variants via devicetree
  regulator: da9121: Add device variant descriptors
  regulator: da9121: Add device variant regmaps
  regulator: da9121: Add device variants
  ...

Pull char / misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 5.11-rc1.

  Continuing the tradition of previous -rc1 pulls, there seems to be
  more and more tiny driver subsystems flowing through this tree.

  Lots of different things, all of which have been in linux-next for a
  while with no reported issues:

   - extcon driver updates

   - habannalab driver updates

   - mei driver updates

   - uio driver updates

   - binder fixes and features added

   - soundwire driver updates

   - mhi bus driver updates

   - phy driver updates

   - coresight driver updates

   - fpga driver updates

   - speakup driver updates

   - slimbus driver updates

   - various small char and misc driver updates"

* tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits)
  extcon: max77693: Fix modalias string
  extcon: fsa9480: Support TI TSU6111 variant
  extcon: fsa9480: Rewrite bindings in YAML and extend
  dt-bindings: extcon: add binding for TUSB320
  extcon: Add driver for TI TUSB320
  slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()
  siox: Make remove callback return void
  siox: Use bus_type functions for probe, remove and shutdown
  spmi: Add driver shutdown support
  spmi: fix some coding style issues at the spmi core
  spmi: get rid of a warning when built with W=1
  uio: uio_hv_generic: use devm_kzalloc() for private data alloc
  uio: uio_fsl_elbc_gpcm: use device-managed allocators
  uio: uio_aec: use devm_kzalloc() for uio_info object
  uio: uio_cif: use devm_kzalloc() for uio_info object
  uio: uio_netx: use devm_kzalloc() for or uio_info object
  uio: uio_mf624: use devm_kzalloc() for uio_info object
  uio: uio_sercos3: use device-managed functions for simple allocs
  uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers
  uio: uio_dmem_genirq: convert simple allocations to device-managed
  ...

Pull driver core updates from Greg KH:
 "Here is the big driver core updates for 5.11-rc1

  This time there was a lot of different work happening here for some
  reason:

   - redo of the fwnode link logic, speeding it up greatly

   - auxiliary bus added (this was a tag that will be pulled in from
     other trees/maintainers this merge window as well, as driver
     subsystems started to rely on it)

   - platform driver core cleanups on the way to fixing some long-time
     api updates in future releases

   - minor fixes and tweaks.

  All have been in linux-next with no (finally) reported issues. Testing
  there did helped in shaking issues out a lot :)"

* tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
  driver core: platform: don't oops in platform_shutdown() on unbound devices
  ACPI: Use fwnode_init() to set up fwnode
  misc: pvpanic: Replace OF headers by mod_devicetable.h
  misc: pvpanic: Combine ACPI and platform drivers
  usb: host: sl811: Switch to use platform_get_mem_or_io()
  vfio: platform: Switch to use platform_get_mem_or_io()
  driver core: platform: Introduce platform_get_mem_or_io()
  dyndbg: fix use before null check
  soc: fix comment for freeing soc_dev_attr
  driver core: platform: use bus_type functions
  driver core: platform: change logic implementing platform_driver_probe
  driver core: platform: reorder functions
  driver core: make driver_probe_device() static
  driver core: Fix a couple of typos
  driver core: Reorder devices on successful probe
  driver core: Delete pointless parameter in fwnode_operations.add_links
  driver core: Refactor fw_devlink feature
  efi: Update implementation of add_links() to create fwnode links
  of: property: Update implementation of add_links() to create fwnode links
  driver core: Use device's fwnode to check if it is waiting for suppliers
  ...

Merge misc updates from Andrew Morton:

 - a few random little subsystems

 - almost all of the MM patches which are staged ahead of linux-next
   material. I'll trickle to post-linux-next work in as the dependents
   get merged up.

Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
  mm: cleanup kstrto*() usage
  mm: fix fall-through warnings for Clang
  mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
  mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
  mm:backing-dev: use sysfs_emit in macro defining functions
  mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
  mm: use sysfs_emit for struct kobject * uses
  mm: fix kernel-doc markups
  zram: break the strict dependency from lzo
  zram: add stat to gather incompressible pages since zram set up
  zram: support page writeback
  mm/process_vm_access: remove redundant initialization of iov_r
  mm/zsmalloc.c: rework the list_add code in insert_zspage()
  mm/zswap: move to use crypto_acomp API for hardware acceleration
  mm/zswap: fix passing zero to 'PTR_ERR' warning
  mm/zswap: make struct kernel_param_ops definitions const
  userfaultfd/selftests: hint the test runner on required privilege
  userfaultfd/selftests: fix retval check for userfaultfd_open()
  userfaultfd/selftests: always dump something in modes
  userfaultfd: selftests: make __{s,u}64 format specifiers portable
  ...

Since commit 70e806e4e645 ("mm: Do early cow for pinned pages during
fork() for ptes") pages under a FOLL_PIN will not be write protected
during COW for fork.  This means that pages returned from
pin_user_pages(FOLL_WRITE) should not become write protected while the pin
is active.

However, there is a small race where get_user_pages_fast(FOLL_PIN) can
establish a FOLL_PIN at the same time copy_present_page() is write
protecting it:

        CPU 0                             CPU 1
   get_user_pages_fast()
    internal_get_user_pages_fast()
                                       copy_page_range()
                                         pte_alloc_map_lock()
                                           copy_present_page()
                                             atomic_read(has_pinned) == 0
					     page_maybe_dma_pinned() == false
     atomic_set(has_pinned, 1);
     gup_pgd_range()
      gup_pte_range()
       pte_t pte = gup_get_pte(ptep)
       pte_access_permitted(pte)
       try_grab_compound_head()
                                             pte = pte_wrprotect(pte)
	                                     set_pte_at();
                                         pte_unmap_unlock()
      // GUP now returns with a write protected page

The first attempt to resolve this by using the write protect caused
problems (and was missing a barrrier), see commit f3c64eda3e50 ("mm: avoid
early COW write protect games during fork()")

Instead wrap copy_p4d_range() with the write side of a seqcount and check
the read side around gup_pgd_range().  If there is a collision then
get_user_pages_fast() fails and falls back to slow GUP.

Slow GUP is safe against this race because copy_page_range() is only
called while holding the exclusive side of the mmap_lock on the src
mm_struct.

[akpm@linux-foundation.org: coding style fixes]
  Link: https://lore.kernel.org/r/CAHk-=wi=iCnYCARbPGjkVJu9eyYeZ13N64tZYLdOB8CP5Q_PLw@mail.gmail.com

Link: https://lkml.kernel.org/r/2-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Fixes: f3c64eda3e50 ("mm: avoid early COW write protect games during fork()")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: "Ahmed S. Darwish" <a.darwish@linutronix.de>	[seqcount_t parts]
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* pm-cpufreq: (31 commits)
  cpufreq: Fix cpufreq_online() return value on errors
  cpufreq: Fix up several kerneldoc comments
  cpufreq: stats: Use local_clock() instead of jiffies
  cpufreq: schedutil: Simplify sugov_update_next_freq()
  cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
  cpufreq: arm_scmi: Discover the power scale in performance protocol
  firmware: arm_scmi: Add power_scale_mw_get() interface
  cpufreq: tegra194: Rename tegra194_get_speed_common function
  cpufreq: tegra194: Remove unnecessary frequency calculation
  cpufreq: tegra186: Simplify cluster information lookup
  cpufreq: tegra186: Fix sparse 'incorrect type in assignment' warning
  cpufreq: imx: fix NVMEM_IMX_OCOTP dependency
  cpufreq: vexpress-spc: Add missing MODULE_ALIAS
  cpufreq: scpi: Add missing MODULE_ALIAS
  cpufreq: loongson1: Add missing MODULE_ALIAS
  cpufreq: sun50i: Add missing MODULE_DEVICE_TABLE
  cpufreq: st: Add missing MODULE_DEVICE_TABLE
  cpufreq: qcom: Add missing MODULE_DEVICE_TABLE
  cpufreq: mediatek: Add missing MODULE_DEVICE_TABLE
  cpufreq: highbank: Add missing MODULE_DEVICE_TABLE
  ...