Pull rst conversion of docs from Mauro Carvalho Chehab:
 "As agreed with Jon, I'm sending this big series directly to you, c/c
  him, as this series required a special care, in order to avoid
  conflicts with other trees"

* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
  docs: kbuild: fix build with pdf and fix some minor issues
  docs: block: fix pdf output
  docs: arm: fix a breakage with pdf output
  docs: don't use nested tables
  docs: gpio: add sysfs interface to the admin-guide
  docs: locking: add it to the main index
  docs: add some directories to the main documentation index
  docs: add SPDX tags to new index files
  docs: add a memory-devices subdir to driver-api
  docs: phy: place documentation under driver-api
  docs: serial: move it to the driver-api
  docs: driver-api: add remaining converted dirs to it
  docs: driver-api: add xilinx driver API documentation
  docs: driver-api: add a series of orphaned documents
  docs: admin-guide: add a series of orphaned documents
  docs: cgroup-v1: add it to the admin-guide book
  docs: aoe: add it to the driver-api book
  docs: add some documentation dirs to the driver-api book
  docs: driver-model: move it to the driver-api book
  docs: lp855x-driver.rst: add it to the driver-api book
  ...

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Set 'struct device' fwnode when registering a new device

  New Drivers:
   - Add support for ROHM BD70528 PMIC

  New Device Support:
   - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
   - Add support for RK809 and RK817 to Rockchip RK808
   - Add support for Lid Angle to ChromeOS core
   - Add support for CS47L15 CODEC to Madera core
   - Add support for CS47L92 CODEC to Madera core
   - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
   - Add support for Add Intel Elkhart Lake PCH to Intel LPSS

  New Functionality:
   - Provide regulator supply information when registering; madera-core
   - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
   - Allow over-riding power button press via Device Tree; rohm-bd718x7
   - Differentiate between running processors; cros_ec_dev

  Fix-ups:
   - Big header file update; cros_ec_commands.h
   - Split header per-subsystem; rohm-bd718x7
   - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
   - Trivial; sorting, coding style; intel-lpss-pci
   - Only remove Power Off functionality if set locally; rk808
   - Make use for Power Off Prepare(); rk808
   - Fix spelling mistake in header guards; stmfx
   - Properly free IDA resources
   - SPDX fixups; cs47lXX-tables, madera
   - Error path fixups; hi655x-pmic

  Bug Fixes:
   - Add missing break in case() statement
   - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
   - Fix reference to Device Tree documentation; madera"

* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
  mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
  mfd: madera: Fixup SPDX headers
  mfd: madera: Remove some unused registers and fix some defaults
  mfd: intel-lpss: Release IDA resources
  mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
  mfd: cs5535-mfd: Remove ifdef OLPC noise
  mfd: stmfx: Fix macro definition spelling
  dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
  MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
  mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
  mfd: rk808: Prepare rk805 for poweroff
  mfd: rk808: Check pm_power_off pointer
  mfd: cros_ec: differentiate SCP from EC by feature bit
  dt-bindings: Add binding for cros-ec-rpmsg
  mfd: madera: Add Madera core support for CS47L92
  mfd: madera: Add Madera core support for CS47L15
  mfd: madera: Update DT bindings to add additional CODECs
  mfd: madera: Add supply mapping for MICVDD
  mfd: madera: Fix potential uninitialised use of variable
  mfd: madera: Fix bad reference to pinctrl.txt file
  ...

There are lots of documents under Documentation/*.txt and a few other
orphan documents elsehwere that belong to the driver-API book.

Move them to their right place.

Reviewed-by: Cornelia Huck <cohuck@redhat.com> # vfio-related parts
Acked-by: Logan Gunthorpe <logang@deltatee.com> # switchtec
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Pull GPIO updates from Linus Walleij:
 "This is the big slew of GPIO changes for the v5.3 kernel cycle. This
  is mostly incremental work this time.

  Three important things:

   - The FMC subsystem is deleted through my tree. This happens through
     GPIO as its demise was discussed in relation to a patch decoupling
     its GPIO implementation from the standard way of handling GPIO. As
     it turns out, that is not the only subsystem it reimplements and
     the authors think it is better do scratch it and start over using
     the proper kernel subsystems than try to polish the rust shiny. See
     the commit (ACKed by the maintainers) for details.

   - Arnd made a small devres patch that was ACKed by Greg and goes into
     the device core.

   - SPDX header change colissions may happen, because at times I've
     seen that quite a lot changed during the -rc:s in regards to SPDX.
     (It is good stuff, tglx has me convinced, and it is worth the
     occasional pain.)

  Apart from this is is nothing controversial or problematic.

  Summary:

  Core:

   - When a gpio_chip request GPIOs from itself, it can now fully
     control the line characteristics, both machine and consumer flags.
     This makes a lot of sense, but took some time before I figured out
     that this is how it has to work.

   - Several smallish documentation fixes.

  New drivers:

   - The PCA953x driver now supports the TI TCA9539.

   - The DaVinci driver now supports the K3 AM654 SoCs.

  Driver improvements:

   - Major overhaul and hardening of the OMAP driver by Russell King.

   - Starting to move some drivers to the new API passing irq_chip along
     with the gpio_chip when adding the gpio_chip instead of adding it
     separately.

  Unrelated:

   - Delete the FMC subsystem"

* tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  Revert "gpio: tegra: Clean-up debugfs initialisation"
  gpiolib: Use spinlock_t instead of struct spinlock
  gpio: stp-xway: allow compile-testing
  gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency
  gpio: stp-xway: improve module clock error handling
  gpio: stp-xway: simplify error handling in xway_stp_probe()
  gpiolib: Clarify use of non-sleeping functions
  gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants
  gpiolib: Document new gpio_chip.init_valid_mask field
  Documentation: gpio: Fix reference to gpiod_get_array()
  gpio: pl061: drop duplicate printing of device name
  gpio: altera: Pass irqchip when adding gpiochip
  gpio: siox: Use devm_ managed gpiochip
  gpio: siox: Add struct device *dev helper variable
  gpio: siox: Pass irqchip when adding gpiochip
  drivers: gpio: amd-fch: make resource struct const
  devres: allow const resource arguments
  gpio: ath79: Pass irqchip when adding gpiochip
  gpio: tegra: Clean-up debugfs initialisation
  gpio: siox: Switch to IRQ_TYPE_NONE
  ...

Enable compile-testing of the stp-xway GPIO driver now that it does not
depend on any architecture specific includes anymore.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20190702223248.31934-5-martin.blumenstingl@googlemail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

ROHM BD70528 PMIC has 4 GPIO pins. Allow them to be
controlled by GPIO framework.

IRQs are handled by regmap-irq and GPIO driver is not
aware of the irq usage.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This driver was using the OF GPIO helper API, but barely used any of its
features and it cost more code than it saved. Also, the OF GPIO code is
now deprecated. Convert it to use a more standard setup and use devm
APIs for initialization to avoid the need for a remove function.

Our rationale for this change is that we are using the Xilinx GPIO with
resources injected using the MFD core rather than on the device tree
itself. Using platform rather than OF-specific resources allows this to
work for free.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add K3 dependencies to enable the driver on K3 platforms.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull GPIO fix from Linus Walleij:
 "Fix a build error in gpio-adp5588"

* tag 'gpio-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: fix gpio-adp5588 build errors

This feature is deprecated, it is helpful to inform users about
this. I'm resisting the temptation to add "depends on BROKEN"
to this, but saving that for later.

Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>