[ Upstream commit 3f66bf401e9fde1c35bb8b02dd7975659c40411d ]

Compute queues are configurable with module param, num_kcq.
amdgpu_gfx_is_high_priority_compute_queue was setting 1st 4 queues to
high priority queue leaving a null drm scheduler in
adev->gpu_sched[hw_ip]["normal_prio"].sched if num_kcq < 5.

This patch tries to fix it by alternating compute queue priority between
normal and high priority.

Fixes: 33abcb1f5a1719b1c (drm/amdgpu: set compute queue priority at mqd_init)
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

GCEA/MMHUB EA error should not result to DF freeze, this is
fixed in next generation, but for some reasons the GCEA/MMHUB
EA error will result to DF freeze in previous generation,
diver should avoid to indicate GCEA/MMHUB EA error as hw fatal
error in kernel message by read GCEA/MMHUB err status registers.

Changed from V1:
    make query_ras_error_status function more general
    make read mmhub er status register more friendly

Changed from V2:
    move ras error status query function into do_recovery workqueue

Changed from V3:
    remove useless code from V2, print GCEA error status
    instance number

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On Navi1x, the SPM golden settings are lost after GFXOFF
enter/exit, so reconfiguration is needed. Make the
configuration code as an interface for future use.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

 Add interface for SMU12 device, used by UMR.

v2: fix code style

Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for GC 10.3.

v2: Squash in gb_addr_config fix (Alex)
v3: Add num_pkrs support (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Rename it to amdgpu_queue_mask_bit_to_set_resource_bit() to be more
specific about its functionality. KFD will use it later.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

According to the current kiq read register method,
there will be race condition when using KIQ to read
register if multiple clients want to read at same time
just like the expample below:
1. client-A start to read REG-0 throguh KIQ
2. client-A poll the seqno-0
3. client-B start to read REG-1 through KIQ
4. client-B poll the seqno-1
5. the kiq complete these two read operation
6. client-A to read the register at the wb buffer and
   get REG-1 value

Therefore, use amdgpu_device_wb_get() to request reg_val_offs
for each kiq read register.

v2: fix the error remove
v3: fix the print typo
v4: remove unused variables

Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Generate HW IP's sched_list in amdgpu_ring_init() instead of
amdgpu_ctx.c. This makes amdgpu_ctx_init_compute_sched(),
ring.has_high_prio and amdgpu_ctx_init_sched() unnecessary.
This patch also stores sched_list for all HW IPs in one big
array in struct amdgpu_device which makes amdgpu_ctx_init_entity()
much more leaner.

v2:
fix a coding style issue
do not use drm hw_ip const to populate amdgpu_ring_type enum

v3:
remove ctx reference and move sched array and num_sched to a struct
use num_scheds to detect uninitialized scheduler list

v4:
use array_index_nospec for user space controlled variables
fix possible checkpatch.pl warnings

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We were changing compute ring priority while rings were being used
before every job submission which is not recommended. This patch
sets compute queue priority at mqd initialization for gfx8, gfx9 and
gfx10.

Policy: make queue 0 of each pipe as high priority compute queue

High/normal priority compute sched lists are generated from set of high/normal
priority compute queues. At context creation, entity of compute queue
get a sched list from high or normal priority depending on ctx->priority

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GFX ras error counters are dirty ones after cold reboot
Read operation is needed to reset them to 0

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>