Pull media updates from Mauro Carvalho Chehab:

 - Added a new V4L2 clock helper

 - New camera sensor drivers

 - iris: Enable H.264/H.265 encoder support and fixes in iris driver
   common code

 - camss: add support for new SoC flavors

 - venus: add new SoC support

 - tc358743: support more infoframe types

 - Various fixes, driver improvements and cleanups

* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
  media: venus: pm_helpers: add fallback for the opp-table
  media: qcom: camss: vfe: Fix BPL alignment for QCM2290
  media: tuner: xc5000: Fix use-after-free in xc5000_release
  media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
  media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
  media: vsp1: Export missing vsp1_isp_free_buffer symbol
  media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
  media: renesas: ceu: Convert to RUNTIME_PM_OPS()
  media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
  media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
  media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
  media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
  media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
  media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
  media: uvcvideo: Shorten the transfer size non compliance message
  media: uvcvideo: Do not re-reference dev->udev
  media: uvcvideo: Use intf instead of udev for printks
  media: uvcvideo: Move video_device under video_queue
  media: uvcvideo: Drop stream->mutex
  media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
  ...

Replace hverkuil@xs4all.nl by hverkuil@kernel.org.

Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The 'bridge' pointer started being assigned and used within this 'if' scope
in commit 0beba3f9d366 ("drm/bridge: connector: add support for HDMI codec
framework").

After that, commit 5d04b4188959 ("drm/bridge: split HDMI Audio from
DRM_BRIDGE_OP_HDMI") removed the code dereferencing it from the same 'if'
scope, but did not remove the assignment.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250808-drm-bridge-alloc-getput-for_each_bridge-v2-2-edb6ee81edf1@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

Simplify code to know whether a bridge is the last in the chain by using
drm_bridge_is_last().

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250801-drm-bridge-alloc-getput-drm_bridge_get_next_bridge-v2-6-888912b0be13@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

At least some panels using the LSB register are not happy with the
unconditional increase of the command buffer to 3 bytes.

With the BOE NE14QDM in my Dell Latitude 7455, the recent patches for
luminance based brightness have introduced a regression: the brightness
range stopped being contiguous and became nonsensical (it probably was
interpreting the last 2 bytes of the buffer and not the first 2).

Change from using a fixed sizeof() to a length variable that's only
set to 3 when luminance is used. Let's leave the default as 2 even for
the single-byte version, since that's how it worked before.

Fixes: f2db78e37fe7 ("drm/dp: Modify drm_edp_backlight_set_level")
Signed-off-by: Val Packett <val@packett.cool>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250706204446.8918-1-val@packett.cool
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

Some bridges can update HDCP status based on userspace requests if they
support HDCP.

The HDCP property is created after connector initialization and before
registration, just like other connector properties.

Add the content protection property to the connector if a bridge
supports HDCP.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250812082135.3351172-2-fshao@chromium.org

Updating drm-misc-next to the state of v6.17-rc1. Begins a new release
cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Pull drm updates from Dave Airlie:
 "Highlights:

   - Intel xe enable Panthor Lake, started adding WildCat Lake

   - amdgpu has a bunch of reset improvments along with the usual IP
     updates

   - msm got VM_BIND support which is important for vulkan sparse memory

   - more drm_panic users

   - gpusvm common code to handle a bunch of core SVM work outside
     drivers.

  Detail summary:

  Changes outside drm subdirectory:
   - 'shrink_shmem_memory()' for better shmem/hibernate interaction
   - Rust support infrastructure:
      - make ETIMEDOUT available
      - add size constants up to SZ_2G
      - add DMA coherent allocation bindings
   - mtd driver for Intel GPU non-volatile storage
   - i2c designware quirk for Intel xe

  core:
   - atomic helpers: tune enable/disable sequences
   - add task info to wedge API
   - refactor EDID quirks
   - connector: move HDR sink to drm_display_info
   - fourcc: half-float and 32-bit float formats
   - mode_config: pass format info to simplify

  dma-buf:
   - heaps: Give CMA heap a stable name

  ci:
   - add device tree validation and kunit

  displayport:
   - change AUX DPCD access probe address
   - add quirk for DPCD probe
   - add panel replay definitions
   - backlight control helpers

  fbdev:
   - make CONFIG_FIRMWARE_EDID available on all arches

  fence:
   - fix UAF issues

  format-helper:
   - improve tests

  gpusvm:
   - introduce devmem only flag for allocation
   - add timeslicing support to GPU SVM

  ttm:
   - improve eviction

  sched:
   - tracing improvements
   - kunit improvements
   - memory leak fixes
   - reset handling improvements

  color mgmt:
   - add hardware gamma LUT handling helpers

  bridge:
   - add destroy hook
   - switch to reference counted drm_bridge allocations
   - tc358767: convert to devm_drm_bridge_alloc
   - improve CEC handling

  panel:
   - switch to reference counter drm_panel allocations
   - fwnode panel lookup
   - Huiling hl055fhv028c support
   - Raspberry Pi 7" 720x1280 support
   - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
   - simple: AUO P238HAN01
   - st7701: Winstar wf40eswaa6mnn0
   - visionox: rm69299-shift
   - Renesas R61307, Renesas R69328 support
   - DJN HX83112B

  hdmi:
   - add CEC handling
   - YUV420 output support

  xe:
   - WildCat Lake support
   - Enable PanthorLake by default
   - mark BMG as SRIOV capable
   - update firmware recommendations
   - Expose media OA units
   - aux-bux support for non-volatile memory
   - MTD intel-dg driver for non-volatile memory
   - Expose fan control and voltage regulator in sysfs
   - restructure migration for multi-device
   - Restore GuC submit UAF fix
   - make GEM shrinker drm managed
   - SRIOV VF Post-migration recovery of GGTT nodes
   - W/A additions/reworks
   - Prefetch support for svm ranges
   - Don't allocate managed BO for each policy change
   - HWMON fixes for BMG
   - Create LRC BO without VM
   - PCI ID updates
   - make SLPC debugfs files optional
   - rework eviction rejection of bound external BOs
   - consolidate PAT programming logic for pre/post Xe2
   - init changes for flicker-free boot
   - Enable GuC Dynamic Inhibit Context switch

  i915:
   - drm_panic support for i915/xe
   - initial flip queue off by default for LNL/PNL
   - Wildcat Lake Display support
   - Support for DSC fractional link bpp
   - Support for simultaneous Panel Replay and Adaptive sync
   - Support for PTL+ double buffer LUT
   - initial PIPEDMC event handling
   - drm_panel_follower support
   - DPLL interface renames
   - allocate struct intel_display dynamically
   - flip queue preperation
   - abstract DRAM detection better
   - avoid GuC scheduling stalls
   - remove DG1 force probe requirement
   - fix MEI interrupt handler on RT kernels
   - use backlight control helpers for eDP
   - more shared display code refactoring

  amdgpu:
   - add userq slot to INFO ioctl
   - SR-IOV hibernation support
   - Suspend improvements
   - Backlight improvements
   - Use scaling for non-native eDP modes
   - cleaner shader updates for GC 9.x
   - Remove fence slab
   - SDMA fw checks for userq support
   - RAS updates
   - DMCUB updates
   - DP tunneling fixes
   - Display idle D3 support
   - Per queue reset improvements
   - initial smartmux support

  amdkfd:
   - enable KFD on loongarch
   - mtype fix for ext coherent system memory

  radeon:
   - CS validation additional GL extensions
   - drop console lock during suspend/resume
   - bump driver version

  msm:
   - VM BIND support
   - CI: infrastructure updates
   - UBWC single source of truth
   - decouple GPU and KMS support
   - DP: rework I/O accessors
   - DPU: SM8750 support
   - DSI: SM8750 support
   - GPU: X1-45 support and speedbin support for X1-85
   - MDSS: SM8750 support

  nova:
   - register! macro improvements
   - DMA object abstraction
   - VBIOS parser + fwsec lookup
   - sysmem flush page support
   - falcon: generic falcon boot code and HAL
   - FWSEC-FRTS: fb setup and load/execute

  ivpu:
   - Add Wildcat Lake support
   - Add turbo flag

  ast:
   - improve hardware generations implementation

  imx:
   - IMX8qxq Display Controller support

  lima:
   - Rockchip RK3528 GPU support

  nouveau:
   - fence handling cleanup

  panfrost:
   - MT8370 support
   - bo labeling
   - 64-bit register access

  qaic:
   - add RAS support

  rockchip:
   - convert inno_hdmi to a bridge

  rz-du:
   - add RZ/V2H(P) support
   - MIPI-DSI DCS support

  sitronix:
   - ST7567 support

  sun4i:
   - add H616 support

  tidss:
   - add TI AM62L support
   - AM65x OLDI bridge support

  bochs:
   - drm panic support

  vkms:
   - YUV and R* format support
   - use faux device

  vmwgfx:
   - fence improvements

  hyperv:
   - move out of simple
   - add drm_panic support"

* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
  drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
  drm/tidss: encoder: convert to devm_drm_bridge_alloc()
  drm/amdgpu: move reset support type checks into the caller
  drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
  drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
  drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
  drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
  drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
  drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
  drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
  drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
  drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
  drm/amdgpu: Add WARN_ON to the resource clear function
  drm/amd/pm: Use cached metrics data on SMUv13.0.6
  drm/amd/pm: Use cached data for min/max clocks
  gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
  drm/amdgpu: Replace HQD terminology with slots naming
  drm/amdgpu: Add user queue instance count in HW IP info
  drm/amd/amdgpu: Add helper functions for isp buffers
  drm/amd/amdgpu: Initialize swnode for ISP MFD device
  ...

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

Pull power management updates from Rafael Wysocki:
 "As is tradition, cpufreq is the part with the largest number of
  updates that include core fixes and cleanups as well as updates of
  several assorted drivers, but there are also quite a few updates
  related to system sleep, mostly focused on asynchronous suspend and
  resume of devices and on making the integration of system suspend
  and resume with runtime PM easier.

  Runtime PM is also updated to allow some code duplication in drivers
  to be eliminated going forward and to work more consistently overall
  in some cases.

  Apart from that, there are some driver core updates related to PM
  domains that should help to address ordering issues with devm_ cleanup
  routines relying on PM domains, some assorted devfreq updates
  including core fixes and cleanups, tooling updates, and documentation
  and MAINTAINERS updates.

  Specifics:

   - Fix two initialization ordering issues in the cpufreq core and a
     governor initialization error path in it, and clean it up (Lifeng
     Zheng)

   - Add Granite Rapids support in no-HWP mode to the intel_pstate
     cpufreq driver (Li RongQing)

   - Make intel_pstate always use HWP_DESIRED_PERF when operating in the
     passive mode (Rafael Wysocki)

   - Allow building the tegra124 cpufreq driver as a module (Aaron
     Kling)

   - Do minor cleanups for Rust cpufreq and cpumask APIs and fix
     MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
     Bulwahn)

   - Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
     Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)

   - Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
     (Prashant Malani)

   - Fix minimum performance state label error in the amd-pstate driver
     documentation (Shouye Liu)

   - Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
     governor and explain HW coordination influence on it in the
     documentation (Shashank Balaji)

   - Fix opencoded for_each_cpu() in idle_state_valid() in the DT
     cpuidle driver (Yury Norov)

   - Remove info about non-existing QoS interfaces from the PM QoS
     documentation (Ulf Hansson)

   - Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)

   - Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)

   - Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)

   - Simplify the sun8i-a33-mbus devfreq driver by using more devm
     functions (Uwe Kleine-König)

   - Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)

   - Check devfreq governor before using governor->name (Lifeng Zheng)

   - Remove a redundant devfreq_get_freq_range() call from
     devfreq_add_device() (Lifeng Zheng)

   - Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)

   - Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)

   - Extend the asynchronous suspend and resume of devices to handle
     suppliers like parents and consumers like children (Rafael Wysocki)

   - Make pm_runtime_force_resume() work for drivers that set the
     DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
     collaborate with the general ACPI PM domain to set it (Rafael
     Wysocki)

   - Add kernel parameter to disable asynchronous suspend/resume of
     devices (Tudor Ambarus)

   - Drop redundant might_sleep() calls from some functions in the
     device suspend/resume core code (Zhongqiu Han)

   - Fix the handling of monitors connected right before waking up the
     system from sleep (tuhaowen)

   - Clean up MAINTAINERS entries for suspend and hibernation (Rafael
     Wysocki)

   - Fix error code path in the KEXEC_JUMP flow and drop a redundant
     pm_restore_gfp_mask() call from it (Rafael Wysocki)

   - Rearrange suspend/resume error handling in the core device suspend
     and resume code (Rafael Wysocki)

   - Fix up white space that does not follow coding style in the
     hibernation core code (Darshan Rathod)

   - Document return values of suspend-related API functions in the
     runtime PM framework (Sakari Ailus)

   - Mark last busy stamp in multiple autosuspend-related functions in
     the runtime PM framework and update its documentation (Sakari
     Ailus)

   - Take active children into account in pm_runtime_get_if_in_use() for
     consistency (Rafael Wysocki)

   - Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
     power capping driver (Sivan Zohar-Kotzer)

   - Add support for the Bartlett Lake platform to the Intel RAPL power
     capping driver (Qiao Wei)

   - Add PL4 support for Panther Lake to the intel_rapl_msr power
     capping driver (Zhang Rui)

   - Update contact information in the PM ABI docs and maintainer
     information in the power domains DT binding (Rafael Wysocki)

   - Update PM header inclusions to follow the IWYU (Include What You
     Use) principle (Andy Shevchenko)

   - Add flags to specify power on attach/detach for PM domains, make
     the driver core detach PM domains in device_unbind_cleanup(), and
     drop the dev_pm_domain_detach() call from the platform bus type
     (Claudiu Beznea)

   - Improve Python binding's Makefile for cpupower (John B. Wyatt IV)

   - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
     Shenoy)"

* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
  cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
  PM: docs: Use my kernel.org address in ABI docs and DT bindings
  PM: hibernate: Fix up white space that does not follow coding style
  PM: sleep: Rearrange suspend/resume error handling in the core
  Documentation: amd-pstate:fix minimum performance state label error
  PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
  kexec_core: Drop redundant pm_restore_gfp_mask() call
  kexec_core: Fix error code path in the KEXEC_JUMP flow
  PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
  drivers: cpufreq: add Tegra114 support
  rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
  cpufreq: Exit governor when failed to start old governor
  cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
  cpufreq: Init policy->rwsem before it may be possibly used
  cpufreq: Initialize cpufreq-based frequency-invariance later
  cpufreq: Remove duplicate check in __cpufreq_offline()
  cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
  cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
  cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
  PM / devfreq: Add HiSilicon uncore frequency scaling driver
  ...