commit a2fcd5c84f7a7825e028381b10182439067aa90d upstream. This patch prevents division by zero htotal. In a follow-up mail Tina writes: > > How did you manage to get here with htotal == 0? This needs backtraces (or if > > this is just about static checkers, a mention of that). > > -Daniel > > In GVT-g, we are trying to enable a virtual display w/o setting timings for a pipe > (a.k.a htotal=0), then we met the following kernel panic: > > [ 32.832048] divide error: 0000 [#1] SMP PTI > [ 32.833614] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc4-sriov+ #33 > [ 32.834438] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.10.1-0-g8891697-dirty-20180511_165818-tinazhang-linux-1 04/01/2014 > [ 32.835901] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.836004] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.836004] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.836004] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.836004] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.836004] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.836004] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.836004] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.836004] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.836004] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.836004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.836004] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.836004] Call Trace: > [ 32.836004] intel_mode_from_pipe_config+0x72/0x90 > [ 32.836004] intel_modeset_setup_hw_state+0x569/0xf90 > [ 32.836004] intel_modeset_init+0x905/0x1db0 > [ 32.836004] i915_driver_load+0xb8c/0x1120 > [ 32.836004] i915_pci_probe+0x4d/0xb0 > [ 32.836004] local_pci_probe+0x44/0xa0 > [ 32.836004] ? pci_assign_irq+0x27/0x130 > [ 32.836004] pci_device_probe+0x102/0x1c0 > [ 32.836004] driver_probe_device+0x2b8/0x480 > [ 32.836004] __driver_attach+0x109/0x110 > [ 32.836004] ? driver_probe_device+0x480/0x480 > [ 32.836004] bus_for_each_dev+0x67/0xc0 > [ 32.836004] ? klist_add_tail+0x3b/0x70 > [ 32.836004] bus_add_driver+0x1e8/0x260 > [ 32.836004] driver_register+0x5b/0xe0 > [ 32.836004] ? mipi_dsi_bus_init+0x11/0x11 > [ 32.836004] do_one_initcall+0x4d/0x1eb > [ 32.836004] kernel_init_freeable+0x197/0x237 > [ 32.836004] ? rest_init+0xd0/0xd0 > [ 32.836004] kernel_init+0xa/0x110 > [ 32.836004] ret_from_fork+0x35/0x40 > [ 32.836004] Modules linked in: > [ 32.859183] ---[ end trace 525608b0ed0e8665 ]--- > [ 32.859722] RIP: 0010:drm_mode_hsync+0x1e/0x40 > [ 32.860287] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66 > [ 32.862680] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206 > [ 32.863309] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000 > [ 32.864182] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0 > [ 32.865206] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330 > [ 32.866359] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000 > [ 32.867213] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800 > [ 32.868075] FS: 0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000 > [ 32.868983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 32.869659] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0 > [ 32.870599] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 32.871598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 32.872549] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > > Since drm_mode_hsync() has the logic to check mode->htotal, I just extend it to cover the case htotal==0. Signed-off-by: Tina Zhang <tina.zhang@intel.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> [danvet: Add additional explanations + cc: stable.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1548228539-3061-1-git-send-email-tina.zhang@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdf35a6b22247746a7053fc764d04218a9306f82 upstream.
I noticed that the VT switch doesn't work any longer with a Dell
laptop with 1366x768 eDP when the machine is connected with a DP
monitor. It behaves as if VT were switched, but the graphics remain
frozen. Actually the keyboard works, so I could switch back to VT7
again.
I tried to track down the problem, and encountered a long story until
we reach to this error:
- The machine is booted with video=1366x768 option (the distro
installer seems to add it as default).
- Recently, drm_helper_probe_single_connector_modes() deals with
cmdline modes, and it tries to create a new mode when no
matching mode is found.
- The drm_mode_create_from_cmdline_mode() creates a mode based on
either CVT of GFT according to the given cmdline mode; in our case,
it's 1366x768.
- Since both CVT and GFT can't express the width 1366 due to
alignment, the resultant mode becomes 1368x768, slightly larger than
the given size.
- Later on, the atomic commit is performed, and in
drm_atomic_check_only(), the size of each plane is checked.
- The size check of 1366x768 fails due to the above, and eventually
the whole VT switch fails.
Back in the history, we've had a manual fix-up of 1368x768 in various
places via c09dedb7a50e ("drm/edid: Add a workaround for 1366x768 HD
panel"), but they have been all in drm_edid.c at probing the modes
from EDID. For addressing the problem above, we need a similar hack
to the mode newly created from cmdline, manually adjusting the width
when the expected size is 1366 while we get 1368 instead.
Fixes: eaf99c749d43 ("drm: Perform cmdline mode parsing during...")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109145614.29454-1-tiwai@suse.de
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b201e743f42d143f4bcdcb14587caf7cb1d99229 upstream. When setting mode via MODE_ID property, drm_atomic_set_mode_prop_for_crtc() does not call drm_mode_set_crtcinfo() which possibly causes: "[drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 32: Can't calculate constants, dotclock = 0!" Whether the error is seen depends on the previous data in state->mode, as state->mode is not cleared when setting new mode. This patch adds drm_mode_set_crtcinfo() call to drm_mode_convert_umode(), which is called in both legacy and atomic paths. This should be fine as there's no reason to call drm_mode_convert_umode() without also setting the crtc related fields. drm_mode_set_crtcinfo() is removed from the legacy drm_mode_setcrtc() as that is no longer needed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the drm_display_mode <-> drm_mode_modeinfo conversion functions from drm_crtc.c to drm_modes.c, and make them non-static so that others can use them. Signed-off-by: Daniel Stone <daniels@collabora.com> Tested-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since we're now using mode == NULL to represent disabled, it's not wholly surprising that we'd want to compare NULL modes. Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Change 'pixes' to 'pixels' Change 'enabel' to 'enable' Change 'enabeling' to 'enabling' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently when a mode is rejected the reason is printed as a raw number. Having to manually decode that to a enum drm_mode_status value is tiresome. Have the code do the decoding instead and print the result in a human readable format. Just having an array of strings indexed with the mode status doesn't work since the enum includes negative values. So we offset the status by +3 which makes all the indexes non-negative. Also add a bit of paranoia into the code to catch out of bounds accesses in case someone adds more enum values but forgets to update the code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup - Implement mode_fixup for a DI vertical timing limitation - Use generic DRM OF helpers in DRM core - Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip driver - Add DC use counter to fix multi-display support - Simplify handling of DI clock flags - A few small fixes and cleanup * tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits) imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set() gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg imx-drm: encoder prepare/mode_set must use adjusted mode imx-drm: ipuv3-crtc: Implement mode_fixup drm_modes: add drm_display_mode_to_videomode gpu: ipu-di: remove some non-functional code gpu: ipu-di: Add ipu_di_adjust_videomode() drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver drm: bridge/dw_hdmi: request interrupt only after initializing the mutes drm: bridge/dw_hdmi: add rockchip rk3288 support dt-bindings: Add documentation for rockchip dw hdmi drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done drm: bridge/dw_hdmi: add mode_valid support drm: bridge/dw_hdmi: add support for multi-byte register width access dt-bindings: add document for dw_hdmi drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi drm: imx: imx-hdmi: split phy configuration to platform driver drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode ...
- plane handling refactoring from Matt Roper and Gustavo Padovan in prep for atomic updates - fixes and more patches for the seqno to request transformation from John - docbook for fbc from Rodrigo - prep work for dual-link dsi from Gaurav Signh - crc fixes from Ville - special ggtt views infrastructure from Tvrtko Ursulin - shadow patch copying for the cmd parser from Brad Volkin - execlist and full ppgtt by default on gen8, for testing for now * tag 'drm-intel-next-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (131 commits) drm/i915: Update DRIVER_DATE to 20141219 drm/i915: Hold runtime PM during plane commit drm/i915: Organize bind_vma funcs drm/i915: Organize INSTDONE report for future. drm/i915: Organize PDP regs report for future. drm/i915: Organize PPGTT init drm/i915: Organize Fence registers for future enablement. drm/i915: tame the chattermouth (v2) drm/i915: Warn about missing context state workarounds only once drm/i915: Use true PPGTT in Gen8+ when execlists are enabled drm/i915: Skip gunit save/restore for cherryview drm/i915/chv: Use timeout mode for RC6 on chv drm/i915: Add GPGPU_THREADS_DISPATCHED to the register whitelist drm/i915: Tidy up execbuffer command parsing code drm/i915: Mark shadow batch buffers as purgeable drm/i915: Use batch length instead of object size in command parser drm/i915: Use batch pools with the command parser drm/i915: Implement a framework for batch buffer pools drm/i915: fix use after free during eDP encoder destroying drm/i915/skl: Skylake also supports DP MST ...