<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/gpu/drm/tiny/repaper.c, branch v6.6.132</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>drm/repaper: fix integer overflows in repeat functions</title>
<updated>2025-04-25T08:45:52+00:00</updated>
<author>
<name>Nikita Zhandarovich</name>
<email>n.zhandarovich@fintech.ru</email>
</author>
<published>2025-01-16T13:48:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=31330248abad7c4b42afc7a29ac1bd5789f296a9'/>
<id>31330248abad7c4b42afc7a29ac1bd5789f296a9</id>
<content type='text'>
commit 4d098000ac193f359e6b8ca4801dbdbd6a27b41f upstream.

There are conditions, albeit somewhat unlikely, under which right hand
expressions, calculating the end of time period in functions like
repaper_frame_fixed_repeat(), may overflow.

For instance, if 'factor10x' in repaper_get_temperature() is high
enough (170), as is 'epd-&gt;stage_time' in repaper_probe(), then the
resulting value of 'end' will not fit in unsigned int expression.

Mitigate this by casting 'epd-&gt;factored_stage_time' to wider type before
any multiplication is done.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 3589211e9b03 ("drm/tinydrm: Add RePaper e-ink driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich &lt;n.zhandarovich@fintech.ru&gt;
Signed-off-by: Alex Lanzano &lt;lanzano.alex@gmail.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 4d098000ac193f359e6b8ca4801dbdbd6a27b41f upstream.

There are conditions, albeit somewhat unlikely, under which right hand
expressions, calculating the end of time period in functions like
repaper_frame_fixed_repeat(), may overflow.

For instance, if 'factor10x' in repaper_get_temperature() is high
enough (170), as is 'epd-&gt;stage_time' in repaper_probe(), then the
resulting value of 'end' will not fit in unsigned int expression.

Mitigate this by casting 'epd-&gt;factored_stage_time' to wider type before
any multiplication is done.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 3589211e9b03 ("drm/tinydrm: Add RePaper e-ink driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich &lt;n.zhandarovich@fintech.ru&gt;
Signed-off-by: Alex Lanzano &lt;lanzano.alex@gmail.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()</title>
<updated>2023-07-29T19:22:02+00:00</updated>
<author>
<name>Geert Uytterhoeven</name>
<email>geert@linux-m68k.org</email>
</author>
<published>2022-03-17T08:18:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=fedf429e071f6dbbe7a69dfc342492e037692018'/>
<id>fedf429e071f6dbbe7a69dfc342492e037692018</id>
<content type='text'>
As the temporary buffer is no longer used to store 8-bit grayscale data,
its size can be reduced to the size needed to store the monochrome
bitmap data.

Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion")
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Reviewed-by: Javier Martinez Canillas &lt;javierm@redhat.com&gt;
Signed-off-by: Javier Martinez Canillas &lt;javierm@redhat.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-6-geert@linux-m68k.org
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
As the temporary buffer is no longer used to store 8-bit grayscale data,
its size can be reduced to the size needed to store the monochrome
bitmap data.

Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion")
Signed-off-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Reviewed-by: Javier Martinez Canillas &lt;javierm@redhat.com&gt;
Signed-off-by: Javier Martinez Canillas &lt;javierm@redhat.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-6-geert@linux-m68k.org
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/fb-helper: Move generic fbdev emulation into separate source file</title>
<updated>2022-11-05T16:12:04+00:00</updated>
<author>
<name>Thomas Zimmermann</name>
<email>tzimmermann@suse.de</email>
</author>
<published>2022-11-03T15:14:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=8ab59da26bc0ae0abfcaabc4218c74827d154256'/>
<id>8ab59da26bc0ae0abfcaabc4218c74827d154256</id>
<content type='text'>
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.

v3:
	* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
	* rebase onto vmwgfx changes
	* rebase onto xlnx changes
	* fix include statements in amdgpu

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Javier Martinez Canillas &lt;javierm@redhat.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.

v3:
	* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
	* rebase onto vmwgfx changes
	* rebase onto xlnx changes
	* fix include statements in amdgpu

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Javier Martinez Canillas &lt;javierm@redhat.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/probe-helper: Add drm_crtc_helper_mode_valid_fixed()</title>
<updated>2022-09-12T07:14:26+00:00</updated>
<author>
<name>Thomas Zimmermann</name>
<email>tzimmermann@suse.de</email>
</author>
<published>2022-09-05T14:16:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=216b9bbaeaea96b7f05c220f61855d174be972d8'/>
<id>216b9bbaeaea96b7f05c220f61855d174be972d8</id>
<content type='text'>
Add drm_crtc_helper_mode_valid_fixed(), which validates a given mode
against a display hardware's mode. Convert simpledrm and use it in a
few other drivers with static modes.

v4:
	* remove empty line after opening brace
v2:
	* rename 'static' and 'hw' to 'fixed' everywhere

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-3-tzimmermann@suse.de
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add drm_crtc_helper_mode_valid_fixed(), which validates a given mode
against a display hardware's mode. Convert simpledrm and use it in a
few other drivers with static modes.

v4:
	* remove empty line after opening brace
v2:
	* rename 'static' and 'hw' to 'fixed' everywhere

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-3-tzimmermann@suse.de
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/probe-helper: Add drm_connector_helper_get_modes_fixed()</title>
<updated>2022-09-12T07:13:25+00:00</updated>
<author>
<name>Thomas Zimmermann</name>
<email>tzimmermann@suse.de</email>
</author>
<published>2022-09-05T14:16:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=d25654b3fad9906ca80912701fd4bd6e2419f54d'/>
<id>d25654b3fad9906ca80912701fd4bd6e2419f54d</id>
<content type='text'>
Add drm_connector_helper_get_modes_fixed(), which duplicates a single
display mode for a connector. Convert drivers.

v2:
	* rename 'static' and 'hw' to 'fixed' everywhere
	* fix typo 'there' to 'their' (Sam)

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-2-tzimmermann@suse.de
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add drm_connector_helper_get_modes_fixed(), which duplicates a single
display mode for a connector. Convert drivers.

v2:
	* rename 'static' and 'hw' to 'fixed' everywhere
	* fix typo 'there' to 'their' (Sam)

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-2-tzimmermann@suse.de
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/format-helper: Rework XRGB8888-to-MONO conversion</title>
<updated>2022-08-10T07:18:53+00:00</updated>
<author>
<name>Thomas Zimmermann</name>
<email>tzimmermann@suse.de</email>
</author>
<published>2022-08-08T12:54:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=b3aca563d69bcbb49343196b4265a8cb7db91bfa'/>
<id>b3aca563d69bcbb49343196b4265a8cb7db91bfa</id>
<content type='text'>
Update XRGB8888-to-MONO conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
	* rebase after renaming CMA helpers to DMA helpers
	* update documentation (Sam)

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Tested-by: Noralf Trønnes &lt;noralf@tronnes.org&gt;
Reviewed-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-13-tzimmermann@suse.de
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Update XRGB8888-to-MONO conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
	* rebase after renaming CMA helpers to DMA helpers
	* update documentation (Sam)

Signed-off-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Tested-by: Noralf Trønnes &lt;noralf@tronnes.org&gt;
Reviewed-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-13-tzimmermann@suse.de
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/gem: rename GEM CMA helpers to GEM DMA helpers</title>
<updated>2022-08-03T16:31:49+00:00</updated>
<author>
<name>Danilo Krummrich</name>
<email>dakr@redhat.com</email>
</author>
<published>2022-08-02T00:04:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=4a83c26a1d8702c516db77fc4423ae896ee904f1'/>
<id>4a83c26a1d8702c516db77fc4423ae896ee904f1</id>
<content type='text'>
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -&gt; dma -&gt; gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done

	# Rename all 'cma_obj's to 'dma_obj'.
	for ff in $(grep -RiHl "cma_obj" $DIRS)
	do
		sed -i -E "s/cma_obj/dma_obj/g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig &amp;&amp; make drivers/gpu/drm`.

Acked-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Acked-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Signed-off-by: Danilo Krummrich &lt;dakr@redhat.com&gt;
Reviewed-by: Liviu Dudau &lt;liviu.dudau@arm.com&gt; #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -&gt; dma -&gt; gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done

	# Rename all 'cma_obj's to 'dma_obj'.
	for ff in $(grep -RiHl "cma_obj" $DIRS)
	do
		sed -i -E "s/cma_obj/dma_obj/g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig &amp;&amp; make drivers/gpu/drm`.

Acked-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Acked-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Signed-off-by: Danilo Krummrich &lt;dakr@redhat.com&gt;
Reviewed-by: Liviu Dudau &lt;liviu.dudau@arm.com&gt; #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/fb: rename FB CMA helpers to FB DMA helpers</title>
<updated>2022-08-03T16:30:55+00:00</updated>
<author>
<name>Danilo Krummrich</name>
<email>dakr@redhat.com</email>
</author>
<published>2022-08-02T00:04:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=6bcfe8eaeef01fb389e951e7c648b934dfd62f15'/>
<id>6bcfe8eaeef01fb389e951e7c648b934dfd62f15</id>
<content type='text'>
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -&gt; dma -&gt; fb dma) calling them "FB DMA" seems to be
more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig &amp;&amp; make drivers/gpu/drm`.

Acked-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Acked-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Signed-off-by: Danilo Krummrich &lt;dakr@redhat.com&gt;
Reviewed-by: Liviu Dudau &lt;liviu.dudau@arm.com&gt; #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -&gt; dma -&gt; fb dma) calling them "FB DMA" seems to be
more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
	#!/bin/bash

	DIRS="drivers/gpu include/drm Documentation/gpu"

	REGEX_SYM_UPPER="[0-9A-Z_\-]"
	REGEX_SYM_LOWER="[0-9a-z_\-]"

	REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
	REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"

	REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
	REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

	# Find all upper case 'CMA' symbols and replace them with 'DMA'.
	for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_UPPER" $ff
	done

	# Find all lower case 'cma' symbols and replace them with 'dma'.
	for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
	do
	       sed -i -E "$REGEX_SED_LOWER" $ff
	done

	# Replace all occurrences of 'CMA' / 'cma' in comments and
	# documentation files with 'DMA' / 'dma'.
	for ff in $(grep -RiHl " cma " $DIRS)
	do
		sed -i -E "s/ cma / dma /g" $ff
		sed -i -E "s/ CMA / DMA /g" $ff
	done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig &amp;&amp; make drivers/gpu/drm`.

Acked-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Acked-by: Thomas Zimmermann &lt;tzimmermann@suse.de&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Signed-off-by: Danilo Krummrich &lt;dakr@redhat.com&gt;
Reviewed-by: Liviu Dudau &lt;liviu.dudau@arm.com&gt; #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
</pre>
</div>
</content>
</entry>
<entry>
<title>drm: Drop drm_framebuffer.h from drm_crtc.h</title>
<updated>2022-06-20T20:53:55+00:00</updated>
<author>
<name>Ville Syrjälä</name>
<email>ville.syrjala@linux.intel.com</email>
</author>
<published>2022-06-14T09:54:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=720cf96d8fecde29b72e1101f8a567a0ce99594f'/>
<id>720cf96d8fecde29b72e1101f8a567a0ce99594f</id>
<content type='text'>
drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well

Signed-off-by: Ville Syrjälä &lt;ville.syrjala@linux.intel.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Acked-by: Jani Nikula &lt;jani.nikula@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.

Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.

v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well

Signed-off-by: Ville Syrjälä &lt;ville.syrjala@linux.intel.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Acked-by: Jani Nikula &lt;jani.nikula@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge drm/drm-next into drm-misc-next</title>
<updated>2022-04-05T09:06:58+00:00</updated>
<author>
<name>Maxime Ripard</name>
<email>maxime@cerno.tech</email>
</author>
<published>2022-04-05T09:06:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=9cbbd694a58bdf24def2462276514c90cab7cf80'/>
<id>9cbbd694a58bdf24def2462276514c90cab7cf80</id>
<content type='text'>
Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
</pre>
</div>
</content>
</entry>
</feed>
