Pull drm updates from Dave Airlie:
 "Lots of work all over, Intel improving DG2 support, amdkfd CRIU
  support, msm new hw support, and faster fbdev support.

  dma-buf:
   - rename dma-buf-map to iosys-map

  core:
   - move buddy allocator to core
   - add pci/platform init macros
   - improve EDID parser deep color handling
   - EDID timing type 7 support
   - add GPD Win Max quirk
   - add yes/no helpers to string_helpers
   - flatten syncobj chains
   - add nomodeset support to lots of drivers
   - improve fb-helper clipping support
   - add default property value interface

  fbdev:
   - improve fbdev ops speed

  ttm:
   - add a backpointer from ttm bo->ttm resource

  dp:
   - move displayport headers
   - add a dp helper module

  bridge:
   - anx7625 atomic support, HDCP support

  panel:
   - split out panel-lvds and lvds bindings
   - find panels in OF subnodes

  privacy:
   - add chromeos privacy screen support

  fb:
   - hot unplug fw fb on forced removal

  simpledrm:
   - request region instead of marking ioresource busy
   - add panel oreintation property

  udmabuf:
   - fix oops with 0 pages

  amdgpu:
   - power management code cleanup
   - Enable freesync video mode by default
   - RAS code cleanup
   - Improve VRAM access for debug using SDMA
   - SR-IOV rework special register access and fixes
   - profiling power state request ioctl
   - expose IP discovery via sysfs
   - Cyan skillfish updates
   - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
   - expose benchmark tests via debugfs
   - add module param to disable XGMI for testing
   - GPU reset debugfs register dumping support

  amdkfd:
   - CRIU support
   - SDMA queue fixes

  radeon:
   - UVD suspend fix
   - iMac backlight fix

  i915:
   - minimal parallel submission for execlists
   - DG2-G12 subplatform added
   - DG2 programming workarounds
   - DG2 accelerated migration support
   - flat CCS and CCS engine support for XeHP
   - initial small BAR support
   - drop fake LMEM support
   - ADL-N PCH support
   - bigjoiner updates
   - introduce VMA resources and async unbinding
   - register definitions cleanups
   - multi-FBC refactoring
   - DG1 OPROM over SPI support
   - ADL-N platform enabling
   - opregion mailbox #5 support
   - DP MST ESI improvements
   - drm device based logging
   - async flip optimisation for DG2
   - CPU arch abstraction fixes
   - improve GuC ADS init to work on aarch64
   - tweak TTM LRU priority hint
   - GuC 69.0.3 support
   - remove short term execbuf pins

  nouveau:
   - higher DP/eDP bitrates
   - backlight fixes

  msm:
   - dpu + dp support for sc8180x
   - dp support for sm8350
   - dpu + dsi support for qcm2290
   - 10nm dsi phy tuning support
   - bridge support for dp encoder
   - gpu support for additional 7c3 SKUs

  ingenic:
   - HDMI support for JZ4780
   - aux channel EDID support

  ast:
   - AST2600 support
   - add wide screen support
   - create DP/DVI connectors

  omapdrm:
   - fix implicit dma_buf fencing

  vc4:
   - add CSC + full range support
   - better display firmware handoff

  panfrost:
   - add initial dual-core GPU support

  stm:
   - new revision support
   - fb handover support

  mediatek:
   - transfer display binding document to yaml format.
   - add mt8195 display device binding.
   - allow commands to be sent during video mode.
   - add wait_for_event for crtc disable by cmdq.

  tegra:
   - YUV format support

  rcar-du:
   - LVDS support for M3-W+ (R8A77961)

  exynos:
   - BGR pixel format for FIMD device"

* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
  drm/i915/display: Do not re-enable PSR after it was marked as not reliable
  drm/i915/display: Fix HPD short pulse handling for eDP
  drm/amdgpu: Use drm_mode_copy()
  drm/radeon: Use drm_mode_copy()
  drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
  drm/amdgpu: Remove pointless on stack mode copies
  drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
  drm/amdgpu/dc: fix typos in comments
  drm/amdgpu: fix typos in comments
  drm/amd/pm: fix typos in comments
  drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
  drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
  drm/amdkfd: evict svm bo worker handle error
  drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
  drm/amdgpu: only allow secure submission on rings which support that
  drm/amdgpu: fixed the warnings reported by kernel test robot
  drm/amd/display: 3.2.177
  drm/amd/display: [FW Promotion] Release 0.0.108.0
  drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
  drm/amd/display: Wait for hubp read line for Pollock
  ...

drm-misc-next for v5.18:

UAPI Changes:

Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.

Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
  to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
  zpos in plane state reset, removing the need for individual drivers
  to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.

Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com

Add a driver that will work with most MIPI DBI compatible SPI panels.
This avoids adding a driver for every new MIPI DBI compatible controller
that is to be used by Linux. The 'compatible' Device Tree property with
a '.bin' suffix will be used to load a firmware file that contains the
controller configuration.

Example (driver will load sainsmart18.bin):

display@0 {
	compatible = "sainsmart18", "panel-mipi-dbi-spi";
...
};

v5:
- kconfig: s/DRM_KMS_CMA_HELPER/DRM_GEM_CMA_HELPER/ (Sam)
- kconfig: Add select VIDEOMODE_HELPERS (Sam)
- kconfig: Add wiki url in the description (Sam)
- Split out and use of_get_drm_panel_display_mode()(Sam)
- Only use the first compatible to look for a firmware file since the
  binding mandates 2 compatibles.
- Make having a firmware file mandatory so we can print an error
  message if it's missing to improve the user experience. It's very
  unlikely that a controller doesn't need to be initialized and if
  it doesn't, it's possible to have a firmware file containing only
  a DCS NOP.

v4:
- Move driver to drm/tiny where the other drivers of its kind are located.
  The driver module will not be shared with a future DPI driver after all.

v3:
- Move properties to DT (Maxime)
- The MIPI DPI spec has optional support for DPI where the controller is
  configured over DBI. Rework the command functions so they can be moved
  to drm_mipi_dbi and shared with a future panel-mipi-dpi-spi driver

v2:
- Drop model property and use compatible instead (Rob)
- Add wiki entry in MAINTAINERS

Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220227124713.39766-6-noralf@tronnes.org

drm-misc-next for v5.18:

UAPI Changes:

Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
  and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.

Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
  advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.

Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
  bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com

There is now a drm_fb_xrgb8888_to_mono_reversed() helper function to do
format conversion from XRGB8888 to reversed monochrome.

Use that helper and remove the open coded version in the repaper driver.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193735.213185-1-javierm@redhat.com

Some devices use e.g. a portrait panel in a standard laptop casing made
for landscape panels. efifb calls drm_get_panel_orientation_quirk() and
sets fb_info.fbcon_rotate_hint to make fbcon rotate the console so that
it shows up-right instead of on its side.

When switching to simpledrm the fbcon renders on its side. Call the
drm_connector_set_panel_orientation_with_quirk() helper to add
a "panel orientation" property on devices listed in the quirk table,
to make the fbcon (and aware userspace apps) rotate the image to
display properly.

Cc: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221220045.11958-1-hdegoede@redhat.com

Cross-subsystem Changes:
------------------------

dma-buf:
- dma-buf-map: Rename to iosys-map (Lucas)

Core Changes:
-------------

drm:
- Always include the debugfs_entry in drm_crtc (Ville)
- Add orientation quirk for GPD Win Max (Anisse)

Driver Changes:
---------------

gvt:
- Constify some pointers. (Rikard Falkeborn)
- Use list_entry to access list members. (Guenter Roeck)
- Fix cmd parser error for Passmark9. (Zhenyu Wang)

i915:
- Various clean-ups including headers and removing unused and unnecessary stuff\
 (Jani, Hans, Andy, Ville)
- Cleaning up on our registers definitions i915_reg.h (Matt)
- More multi-FBC refactoring (Ville)
- Baytrail backlight fix (Hans)
- DG1 OPROM read through SPI controller (Clint)
- ADL-N platform enabling (Tejas)
- Fix slab-out-of-bounds access (Jani)
- Add opregion mailbox #5 support for possible EDID override (Anisse)
- Fix possible NULL dereferences (Harish)
- Updates and fixes around display voltage swing values (Clint, Jose)
- Fix RPM wekeref on PXP code (Juston)
- Many register definitions clean-up, including planes registers (Ville)
- More conversion towards display version over the old gen (Madhumitha, Ville)
- DP MST ESI handling improvements (Jani)
- drm device based logging conversions (Jani)
- Prevent divide by zero (Dan)
- Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville)
- Async flip optimization for DG2 (Stanislav)
- Multiple DSC and bigjoiner fixes and improvements (Ville)
- Fix ADL-P TypeC Phy ready status readout (Imre)
- Fix up DP DFP 4:2:0 handling more display related fixes (Ville)
- Display M/N cleanup (Ville)
- Switch to use VGA definitions from video/vga.h (Jani)
- Fixes and improvements to abstract CPU architecture (Lucas)
- Disable unsused power wells left enabled by BIOS (Imre)
- Allow !join_mbus cases for adlp+ dbuf configuration (Ville)
- Populate pipe dbuf slices more accurately during readout (Ville)
- Workaround broken BIOS DBUF configuration on TGL/RKL (Ville)
- Fix trailing semicolon (Lucas)

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com

The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

Rename struct dma_buf_map to struct iosys_map and corresponding APIs.
Over time dma-buf-map grew up to more functionality than the one used by
dma-buf: in fact it's just a shim layer to abstract system memory, that
can be accessed via regular load and store, from IO memory that needs to
be acessed via arch helpers.

The idea is to extend this API so it can fulfill other needs, internal
to a single driver. Example: in the i915 driver it's desired to share
the implementation for integrated graphics, which uses mostly system
memory, with discrete graphics, which may need to access IO memory.

The conversion was mostly done with the following semantic patch:

	@r1@
	@@
	- struct dma_buf_map
	+ struct iosys_map

	@r2@
	@@
	(
	- DMA_BUF_MAP_INIT_VADDR
	+ IOSYS_MAP_INIT_VADDR
	|
	- dma_buf_map_set_vaddr
	+ iosys_map_set_vaddr
	|
	- dma_buf_map_set_vaddr_iomem
	+ iosys_map_set_vaddr_iomem
	|
	- dma_buf_map_is_equal
	+ iosys_map_is_equal
	|
	- dma_buf_map_is_null
	+ iosys_map_is_null
	|
	- dma_buf_map_is_set
	+ iosys_map_is_set
	|
	- dma_buf_map_clear
	+ iosys_map_clear
	|
	- dma_buf_map_memcpy_to
	+ iosys_map_memcpy_to
	|
	- dma_buf_map_incr
	+ iosys_map_incr
	)

	@@
	@@
	- #include <linux/dma-buf-map.h>
	+ #include <linux/iosys-map.h>

Then some files had their includes adjusted and some comments were
update to remove mentions to dma-buf-map.

Since this is not specific to dma-buf anymore, move the documentation to
the "Bus-Independent Device Accesses" section.

v2:
  - Squash patches

v3:
  - Fix wrong removal of dma-buf.h from MAINTAINERS
  - Move documentation from dma-buf.rst to device-io.rst

v4:
  - Change documentation title and level

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com

First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>