Move from the old, complex intr handling code to a new implementation based on dma_fences. While there is a fair bit of churn to get there, the new implementation is much simpler and likely faster as well due to allowing signaling directly from interrupt context. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Program virtualization tables specifying which VMs have access to which Host1x hardware resources. Programming these has become mandatory in Tegra234. For now, since the driver does not operate as a Host1x hypervisor, we basically allow access to everything to everyone. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Refactor 'regs' property loading using devm_platform_ioremap_* and add loading of the 'common' region found on Tegra234. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Add code to register context devices from device tree, allocate them out and manage their refcounts. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Add runtime PM and OPP support to the Host1x driver. For the starter we will keep host1x always-on because dynamic power management require a major refactoring of the driver code since lot's of code paths are missing the RPM handling and we're going to remove some of these paths in the future. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
This cache is used to avoid mapping and unmapping buffer objects unnecessarily. Mappings are cached per client and stay hot until the buffer object is destroyed. Signed-off-by: Thierry Reding <treding@nvidia.com>
On T20-T148 chips, the bootloader can set up a boot splash screen with DC configured to increment syncpoint 26/27 at VBLANK. Because of this we shouldn't allow these syncpoints to be allocated until DC has been reset and will no longer increment them in the background. As such, on these chips, reserve those two syncpoints at initialization, and only mark them free once the DC driver has indicated it's safe to do so. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Add reference counting for allocated syncpoints to allow keeping them allocated while jobs are referencing them. Additionally, clean up various places using syncpoint IDs to use host1x_syncpt pointers instead. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
If the Tegra DRM clients are backed by an IOMMU, push buffers are likely to be allocated beyond the 32-bit boundary if sufficient system memory is available. This is problematic on earlier generations of Tegra where host1x supports a maximum of 32 address bits for the GATHER opcode. More recent versions of Tegra (Tegra186 and later) have a wide variant of the GATHER opcode, which allows addressing up to 64 bits of memory. If host1x itself is behind an IOMMU as well this doesn't matter because the IOMMU's input address space is restricted to 32 bits on generations without support for wide GATHER opcodes. However, if host1x is not behind an IOMMU, it won't be able to process push buffers beyond the 32-bit boundary on Tegra generations that don't support wide GATHER opcodes. Restrict the DMA mask to 32 bits on these generations prevents buffers from being allocated from beyond the 32-bit boundary. Signed-off-by: Thierry Reding <treding@nvidia.com>
host1x nor any its clients have any limitations on the DMA segment size, so don't pretend that they do. Signed-off-by: Thierry Reding <treding@nvidia.com>