linux.git/drivers/gpu/ipu-v3/ipu-common.c, branch v4.9.209

gpu: ipu-v3: Fix CSI offsets for imx53

2019-03-23T12:19:41+00:00

[ Upstream commit bb867d219fda7fbaabea3314702474c4eac2b91d ]

The CSI offsets are wrong for both CSI0 and CSI1. They are at
physical address 0x1e030000 and 0x1e038000 respectively.

Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")

Signed-off-by: Steve Longerbeam 
Signed-off-by: Philipp Zabel 
Signed-off-by: Sasha Levin

gpu: ipu-v3: Fix i.MX51 CSI control registers offset

2019-03-23T12:19:41+00:00

[ Upstream commit 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 ]

The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative
to the control module registers on IPUv3EX.
This patch fixes wrong values for i.MX51 CSI0/CSI1.

Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")

Signed-off-by: Alexander Shiyan 
Signed-off-by: Philipp Zabel 
Signed-off-by: Sasha Levin

gpu: ipu-v3: Fix CSI selection for VDIC

2018-11-10T15:42:48+00:00

[ Upstream commit b7dfee2433576f1f030cb84cdb04b70f36554992 ]

The description of the CSI_SEL bit in the i.MX6 reference manual is
incorrect. It states "This bit defines which CSI is the input to the
IC. This bit is effective only if IC_INPUT is bit cleared".

From experiment it was found this is in fact not correct. The CSI_SEL
bit selects which CSI is input to _both_ the VDIC _and_ the IC. If the
IC_INPUT bit is set so that the IC is receiving from the VDIC, the IC
ignores the CSI_SEL bit, but CSI_SEL still selects which CSI the VDIC
receives from in that case.

Signed-off-by: Marek Vasut 
Signed-off-by: Steve Longerbeam 
Signed-off-by: Philipp Zabel 
Signed-off-by: Sasha Levin

gpu: ipu-v3: Add queued image conversion support

2016-09-19T06:30:27+00:00

This patch implements image conversion support using the IC tasks, with
tiling to support scaling to and from images up to 4096x4096. Image
rotation is also supported. Image conversion requests are added to
a run queue under the IC tasks.

The internal API is subsystem agnostic (no V4L2 dependency except
for the use of V4L2 fourcc pixel formats).

Callers prepare for image conversion by calling
ipu_image_convert_prepare(), which initializes the parameters of
the conversion. The caller passes in the ipu and IC task to use for
the conversion, the input and output image formats, a rotation mode,
and a completion callback and completion context pointer:

struct ipu_image_converter_ctx *
ipu_image_convert_prepare(struct ipu_soc *ipu, enum ipu_ic_task ic_task,
                          struct ipu_image *in, struct ipu_image *out,
                          enum ipu_rotate_mode rot_mode,
                          ipu_image_converter_cb_t complete,
                          void *complete_context);

A new conversion context is created that is added to an IC task
context queue. The caller is given the new conversion context,
which can then be passed to the further APIs:

int ipu_image_convert_queue(struct ipu_image_converter_run *run);

This queues the given image conversion request run to a run queue,
and starts the conversion immediately if the run queue is empty. Only
the physaddr's of the input and output image buffers are needed,
since the conversion context was created previously with
ipu_image_convert_prepare(). When the conversion completes, the run
pointer is returned to the completion callback.

void ipu_image_convert_abort(struct ipu_image_converter_ctx *ctx);

This will abort any active or pending conversions for this context.
Any currently active or pending runs belonging to this context are
returned via the completion callback with an error status.

void ipu_image_convert_unprepare(struct ipu_image_converter_ctx *ctx);

Unprepares the conversion context. Any active or pending runs will
be aborted by calling ipu_image_convert_abort().

Signed-off-by: Steve Longerbeam 
Signed-off-by: Philipp Zabel

gpu: ipu-v3: fix a possible NULL dereference

2016-09-19T06:30:10+00:00

of_match_device could return NULL, and so cause a NULL pointer
dereference later.

For fixing this problem, we use of_device_get_match_data(), this will
simplify the code a little by using a standard function for
getting the match data.

Testing the return value of of_device_get_match_data is also necessary
for avoiding a second NULL deref later on devtype.

Signed-off-by: LABBE Corentin 
Signed-off-by: Philipp Zabel

gpu: ipu-v3: Add FSU channel linking support

2016-08-29T14:30:23+00:00

Adds functions to link and unlink source channels to sink
channels in the FSU:

int ipu_fsu_link(struct ipu_soc *ipu, int src_ch, int sink_ch);
int ipu_fsu_unlink(struct ipu_soc *ipu, int src_ch, int sink_ch);

The channels numbers are usually IDMAC channels, but they can also be
channels that do not transfer data to or from memory. The following
convenience functions can be used in place of ipu_fsu_link/unlink()
when both source and sink channels are IDMAC channels:

int ipu_idmac_link(struct ipuv3_channel *src, struct ipuv3_channel *sink);
int ipu_idmac_unlink(struct ipuv3_channel *src, struct ipuv3_channel *sink);

So far the following links are supported:

IPUV3_CHANNEL_IC_PRP_ENC_MEM -> IPUV3_CHANNEL_MEM_ROT_ENC
PUV3_CHANNEL_IC_PRP_VF_MEM   -> IPUV3_CHANNEL_MEM_ROT_VF
IPUV3_CHANNEL_IC_PP_MEM      -> IPUV3_CHANNEL_MEM_ROT_PP
IPUV3_CHANNEL_CSI_DIRECT     -> IPUV3_CHANNEL_CSI_VDI_PREV

More links can be added to the fsu_link_info[] array.

Signed-off-by: Steve Longerbeam 
Signed-off-by: Philipp Zabel

gpu: ipu-v3: Add Video Deinterlacer unit

2016-08-29T14:30:11+00:00

Adds the Video Deinterlacer (VDIC) unit.

Signed-off-by: Steve Longerbeam 
Signed-off-by: Philipp Zabel

gpu: ipu-v3: rename CSI client device

2016-08-08T09:44:20+00:00

Rename the CSI client device in the client_reg[] table to
"imx-ipuv3-csi".

Signed-off-by: Steve Longerbeam 
Signed-off-by: Philipp Zabel

gpu: ipu-v3: Add ipu_get_num()

2016-08-08T09:44:20+00:00

Adds of-alias id to ipu_soc and retrieve with ipu_get_num().

Signed-off-by: Steve Longerbeam 
Signed-off-by: Philipp Zabel

drm/imx: Match imx-ipuv3-crtc components using device node in platform data

2016-05-23T10:35:11+00:00

The component master driver imx-drm-core matches component devices using
their of_node. Since commit 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc
module autoloading"), the imx-ipuv3-crtc dev->of_node is not set during
probing. Before that, of_node was set and caused an of: modalias to be
used instead of the platform: modalias, which broke module autoloading.

On the other hand, if dev->of_node is not set yet when the imx-ipuv3-crtc
probe function calls component_add, component matching in imx-drm-core
fails. While dev->of_node will be set once the next component tries to
bring up the component master, imx-drm-core component binding will never
succeed if one of the crtc devices is probed last.

Add of_node to the component platform data and match against the
pdata->of_node instead of dev->of_node in imx-drm-core to work around
this problem.

Cc:  # 4.4.x
Fixes: 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading")
Signed-off-by: Philipp Zabel 
Tested-by: Fabio Estevam 
Tested-by: Lothar Waßmann 
Tested-by: Heiko Schocher 
Tested-by: Chris Ruehl