linux.git/drivers/gpu, branch v3.18.111

drm/exynos: fix comparison to bitshift when dealing with a mask

2018-05-30T05:47:34+00:00

[ Upstream commit 1293b6191010672c0c9dacae8f71c6f3e4d70cbe ]

Due to a typo, the mask was destroyed by a comparison instead of a bit
shift.

Signed-off-by: Wolfram Sang 
Signed-off-by: Inki Dae 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: Fix PCIe lane width calculation

2018-04-24T07:29:28+00:00

commit 85e290d92b4b794d0c758c53007eb4248d385386 upstream.

Two years ago I tried an AMD Radeon E8860 embedded GPU with the drm driver.
The dmesg output included driver warnings about an invalid PCIe lane width.
Tracking the problem back led to si_set_pcie_lane_width_in_smc().
The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and
ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting
value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere.
Applying the increment silenced the warnings.
The code has not changed since, so either my analysis was incorrect or the
bug has gone unnoticed. Hence submitting this as an RFC.

Acked-by: Christian König 
Acked-by: Chunming Zhou 
Signed-off-by: Paul Parsons 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

drm/omap: fix tiled buffer stride calculations

2018-04-13T17:52:17+00:00

[ Upstream commit cc8dd7661ccc2d8dc88921da8e6cc7c2fcdb0341 ]

omap_gem uses page alignment for buffer stride. The related calculations
are a bit off, though, as byte stride of 4096 gets aligned to 8192,
instead of 4096.

This patch changes the code to use DIV_ROUND_UP(), which fixes those
calculations and makes them more readable.

Signed-off-by: Tomi Valkeinen 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm: udl: Properly check framebuffer mmap offsets

2018-04-08T09:49:41+00:00

commit 3b82a4db8eaccce735dffd50b4d4e1578099b8e8 upstream.

The memmap options sent to the udl framebuffer driver were not being
checked for all sets of possible crazy values.  Fix this up by properly
bounding the allowed values.

Reported-by: Eyal Itkin 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.com
Signed-off-by: Greg Kroah-Hartman

drm/omap: DMM: Check for DMM readiness after successful transaction commit

2018-03-24T09:57:35+00:00

[ Upstream commit b7ea6b286c4051e043f691781785e3c4672f014a ]

Check the status of the DMM engine after it is reported that the
transaction was completed as in rare cases the engine might not reached a
working state.

The wait_status() will print information in case the DMM is not reached the
expected state and the dmm_txn_commit() will return with an error code to
make sure that we are not continuing with a broken setup.

Signed-off-by: Peter Ujfalusi 
Signed-off-by: Tomi Valkeinen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/msm: fix leak in failed get_pages

2018-03-24T09:57:34+00:00

[ Upstream commit 62e3a3e342af3c313ab38603811ecdb1fcc79edb ]

get_pages doesn't keep a reference of the pages allocated
when it fails later in the code path. This can lead to
a memory leak. Keep reference of the allocated pages so
that it can be freed when msm_gem_free_object gets called
later during cleanup.

Signed-off-by: Prakash Kamliya 
Signed-off-by: Sharat Masetty 
Signed-off-by: Rob Clark 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: Fail fb creation from imported dma-bufs.

2018-03-22T08:37:15+00:00

[ Upstream commit a294043b2fbd8de69d161457ed0c7a4026bbfa5a ]

Any use of the framebuffer will migrate it to VRAM, which is not sensible for
an imported dma-buf.

v2: Use DRM_DEBUG_KMS to prevent userspace accidentally spamming dmesg.

Reviewed-by: Michel Dänzer 
Reviewed-by: Christian König 
Signed-off-by: Christopher James Halse Rogers 
CC: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)

2018-03-22T08:37:12+00:00

[ Upstream commit 608b20506941969ea30d8c08dc9ae02bb87dbf7d ]

On vblank instant-off systems, we can get into a situation where the cost
of enabling and disabling the vblank IRQ around a drmWaitVblank query
dominates. And with the advent of even deeper hardware sleep state,
touching registers becomes ever more expensive.  However, we know that if
the user wants the current vblank counter, they are also very likely to
immediately queue a vblank wait and so we can keep the interrupt around
and only turn it off if we have no further vblank requests queued within
the interrupt interval.

After vblank event delivery, this patch adds a shadow of one vblank where
the interrupt is kept alive for the user to query and queue another vblank
event. Similarly, if the user is using blocking drmWaitVblanks, the
interrupt will be disabled on the IRQ following the wait completion.
However, if the user is simply querying the current vblank counter and
timestamp, the interrupt will be disabled after every IRQ and the user
will enabled it again on the first query following the IRQ.

v2: Mario Kleiner -
After testing this, one more thing that would make sense is to move
the disable block at the end of drm_handle_vblank() instead of at the
top.

Turns out that if high precision timestaming is disabled or doesn't
work for some reason (as can be simulated by echo 0 >
/sys/module/drm/parameters/timestamp_precision_usec), then with your
delayed disable code at its current place, the vblank counter won't
increment anymore at all for instant queries, ie. with your other
"instant query" patches. Clients which repeatedly query the counter
and wait for it to progress will simply hang, spinning in an endless
query loop. There's that comment in vblank_disable_and_save:

"* Skip this step if there isn't any high precision timestamp
 * available. In that case we can't account for this and just
 * hope for the best.
 */

With the disable happening after leading edge of vblank (== hw counter
increment already happened) but before the vblank counter/timestamp
handling in drm_handle_vblank, that step is needed to keep the counter
progressing, so skipping it is bad.

Now without high precision timestamping support, a kms driver must not
set dev->vblank_disable_immediate = true, as this would cause problems
for clients, so this shouldn't matter, but it would be good to still
make this robust against a future kms driver which might have
unreliable high precision timestamping, e.g., high precision
timestamping that intermittently doesn't work.

v3: Patch before coffee needs extra coffee.

Testcase: igt/kms_vblank
Signed-off-by: Chris Wilson 
Cc: Ville Syrjälä 
Cc: Daniel Vetter 
Cc: Michel Dänzer 
Cc: Laurent Pinchart 
Cc: Dave Airlie ,
Cc: Mario Kleiner 
Reviewed-by: Ville Syrjälä 
Signed-off-by: Daniel Vetter 
Link: http://patchwork.freedesktop.org/patch/msgid/20170315204027.20160-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/ttm: check the return value of kzalloc

2018-03-03T09:17:10+00:00

[ Upstream commit 19d859a7205bc59ffc38303eb25ae394f61d21dc ]

In the function ttm_page_alloc_init, kzalloc call is made for variable
_manager, we need to check its return value, it may return NULL.

Signed-off-by: Xiongwei Song 
Reviewed-by: Christian König 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: adjust tested variable

2018-02-25T10:01:16+00:00

commit 3a61b527b4e1f285d21b6e9e623dc45cf8bb391f upstream.

Check the variable that was most recently initialized.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// 
@@
expression x, y, f, g, e, m;
statement S1,S2,S3,S4;
@@

x = f(...);
if (\(<+...x...+>\&e\)) S1 else S2
(
x = g(...);
|
m = g(...,&x,...);
|
y = g(...);
*if (e)
 S3 else S4
)
// 

Signed-off-by: Julia Lawall 
Reviewed-by: Christian König 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman