<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/gpu, branch v4.19.115</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>drm/msm: Use the correct dma_sync calls in msm_gem</title>
<updated>2020-04-13T08:45:17+00:00</updated>
<author>
<name>Rob Clark</name>
<email>robdclark@chromium.org</email>
</author>
<published>2019-07-30T21:46:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=39718d086d9b59bd04bc7ecd5e7eb9109d7d7402'/>
<id>39718d086d9b59bd04bc7ecd5e7eb9109d7d7402</id>
<content type='text'>
commit 3de433c5b38af49a5fc7602721e2ab5d39f1e69c upstream.

[subject was: drm/msm: shake fist angrily at dma-mapping]

So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but
it falls appart with dma direct ops.  The problem is that, depending on
display generation, we can have either set of dma ops (mdp4 and dpu have
iommu wired to mdss node, which maps to toplevel drm device, but mdp5
has iommu wired up to the mdp sub-node within mdss).

Fixes this splat on mdp5 devices:

   Unable to handle kernel paging request at virtual address ffffffff80000000
   Mem abort info:
     ESR = 0x96000144
     Exception class = DABT (current EL), IL = 32 bits
     SET = 0, FnV = 0
     EA = 0, S1PTW = 0
   Data abort info:
     ISV = 0, ISS = 0x00000144
     CM = 1, WnR = 1
   swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000
   [ffffffff80000000] pgd=0000000000000000
   Internal error: Oops: 96000144 [#1] SMP
   Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks
   CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1
   Hardware name: Samsung Galaxy A5U (EUR) (DT)
   Workqueue: events deferred_probe_work_func
   pstate: 80000005 (Nzcv daif -PAN -UAO)
   pc : __clean_dcache_area_poc+0x20/0x38
   lr : arch_sync_dma_for_device+0x28/0x30
   sp : ffff0000115736a0
   x29: ffff0000115736a0 x28: 0000000000000001
   x27: ffff800074830800 x26: ffff000011478000
   x25: 0000000000000000 x24: 0000000000000001
   x23: ffff000011478a98 x22: ffff800009fd1c10
   x21: 0000000000000001 x20: ffff800075ad0a00
   x19: 0000000000000000 x18: ffff0000112b2000
   x17: 0000000000000000 x16: 0000000000000000
   x15: 00000000fffffff0 x14: ffff000011455d70
   x13: 0000000000000000 x12: 0000000000000028
   x11: 0000000000000001 x10: ffff00001106c000
   x9 : ffff7e0001d6b380 x8 : 0000000000001000
   x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382
   x5 : 0000000000000000 x4 : 0000000000001000
   x3 : 000000000000003f x2 : 0000000000000040
   x1 : ffffffff80001000 x0 : ffffffff80000000
   Call trace:
    __clean_dcache_area_poc+0x20/0x38
    dma_direct_sync_sg_for_device+0xb8/0xe8
    get_pages+0x22c/0x250 [msm]
    msm_gem_get_and_pin_iova+0xdc/0x168 [msm]
    ...

Fixes the combination of two patches:

Fixes: 0036bc73ccbe (drm/msm: stop abusing dma_map/unmap for cache)
Fixes: 449fa54d6815 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device)
Tested-by: Stephan Gerhold &lt;stephan@gerhold.net&gt;
Signed-off-by: Rob Clark &lt;robdclark@chromium.org&gt;
[seanpaul changed subject to something more desriptive]
Signed-off-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com
Cc: nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 3de433c5b38af49a5fc7602721e2ab5d39f1e69c upstream.

[subject was: drm/msm: shake fist angrily at dma-mapping]

So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but
it falls appart with dma direct ops.  The problem is that, depending on
display generation, we can have either set of dma ops (mdp4 and dpu have
iommu wired to mdss node, which maps to toplevel drm device, but mdp5
has iommu wired up to the mdp sub-node within mdss).

Fixes this splat on mdp5 devices:

   Unable to handle kernel paging request at virtual address ffffffff80000000
   Mem abort info:
     ESR = 0x96000144
     Exception class = DABT (current EL), IL = 32 bits
     SET = 0, FnV = 0
     EA = 0, S1PTW = 0
   Data abort info:
     ISV = 0, ISS = 0x00000144
     CM = 1, WnR = 1
   swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000
   [ffffffff80000000] pgd=0000000000000000
   Internal error: Oops: 96000144 [#1] SMP
   Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks
   CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1
   Hardware name: Samsung Galaxy A5U (EUR) (DT)
   Workqueue: events deferred_probe_work_func
   pstate: 80000005 (Nzcv daif -PAN -UAO)
   pc : __clean_dcache_area_poc+0x20/0x38
   lr : arch_sync_dma_for_device+0x28/0x30
   sp : ffff0000115736a0
   x29: ffff0000115736a0 x28: 0000000000000001
   x27: ffff800074830800 x26: ffff000011478000
   x25: 0000000000000000 x24: 0000000000000001
   x23: ffff000011478a98 x22: ffff800009fd1c10
   x21: 0000000000000001 x20: ffff800075ad0a00
   x19: 0000000000000000 x18: ffff0000112b2000
   x17: 0000000000000000 x16: 0000000000000000
   x15: 00000000fffffff0 x14: ffff000011455d70
   x13: 0000000000000000 x12: 0000000000000028
   x11: 0000000000000001 x10: ffff00001106c000
   x9 : ffff7e0001d6b380 x8 : 0000000000001000
   x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382
   x5 : 0000000000000000 x4 : 0000000000001000
   x3 : 000000000000003f x2 : 0000000000000040
   x1 : ffffffff80001000 x0 : ffffffff80000000
   Call trace:
    __clean_dcache_area_poc+0x20/0x38
    dma_direct_sync_sg_for_device+0xb8/0xe8
    get_pages+0x22c/0x250 [msm]
    msm_gem_get_and_pin_iova+0xdc/0x168 [msm]
    ...

Fixes the combination of two patches:

Fixes: 0036bc73ccbe (drm/msm: stop abusing dma_map/unmap for cache)
Fixes: 449fa54d6815 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device)
Tested-by: Stephan Gerhold &lt;stephan@gerhold.net&gt;
Signed-off-by: Rob Clark &lt;robdclark@chromium.org&gt;
[seanpaul changed subject to something more desriptive]
Signed-off-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com
Cc: nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>drm_dp_mst_topology: fix broken drm_dp_sideband_parse_remote_dpcd_read()</title>
<updated>2020-04-13T08:45:17+00:00</updated>
<author>
<name>Hans Verkuil</name>
<email>hans.verkuil@cisco.com</email>
</author>
<published>2018-08-27T08:07:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=329ef07f7fb83d4de62c239e376a6a0e04ff4b3c'/>
<id>329ef07f7fb83d4de62c239e376a6a0e04ff4b3c</id>
<content type='text'>
commit a4c30a4861c54af78c4eb8b7855524c1a96d9f80 upstream.

When parsing the reply of a DP_REMOTE_DPCD_READ DPCD command the
result is wrong due to a missing idx increment.

This was never noticed since DP_REMOTE_DPCD_READ is currently not
used, but if you enable it, then it is all wrong.

Signed-off-by: Hans Verkuil &lt;hans.verkuil@cisco.com&gt;
Reviewed-by: Lyude Paul &lt;lyude@redhat.com&gt;
Acked-by: Alex Deucher &lt;alexander.deucher@amd.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/e72ddac2-1dc0-100a-d816-9ac98ac009dd@xs4all.nl
Signed-off-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a4c30a4861c54af78c4eb8b7855524c1a96d9f80 upstream.

When parsing the reply of a DP_REMOTE_DPCD_READ DPCD command the
result is wrong due to a missing idx increment.

This was never noticed since DP_REMOTE_DPCD_READ is currently not
used, but if you enable it, then it is all wrong.

Signed-off-by: Hans Verkuil &lt;hans.verkuil@cisco.com&gt;
Reviewed-by: Lyude Paul &lt;lyude@redhat.com&gt;
Acked-by: Alex Deucher &lt;alexander.deucher@amd.com&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/e72ddac2-1dc0-100a-d816-9ac98ac009dd@xs4all.nl
Signed-off-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>drm/msm: stop abusing dma_map/unmap for cache</title>
<updated>2020-04-13T08:45:15+00:00</updated>
<author>
<name>Rob Clark</name>
<email>robdclark@chromium.org</email>
</author>
<published>2019-06-30T12:47:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=9c23e00804f8ae79175c7d64def83334ee04587f'/>
<id>9c23e00804f8ae79175c7d64def83334ee04587f</id>
<content type='text'>
commit 0036bc73ccbe7e600a3468bf8e8879b122252274 upstream.

Recently splats like this started showing up:

   WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0
   Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide
   CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G        W         5.2.0-rc5-next-20190619+ #2317
   Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018
   Workqueue: msm msm_gem_free_work [msm]
   pstate: 80c00005 (Nzcv daif +PAN +UAO)
   pc : __iommu_dma_unmap+0xb8/0xc0
   lr : __iommu_dma_unmap+0x54/0xc0
   sp : ffff0000119abce0
   x29: ffff0000119abce0 x28: 0000000000000000
   x27: ffff8001f9946648 x26: ffff8001ec271068
   x25: 0000000000000000 x24: ffff8001ea3580a8
   x23: ffff8001f95ba010 x22: ffff80018e83ba88
   x21: ffff8001e548f000 x20: fffffffffffff000
   x19: 0000000000001000 x18: 00000000c00001fe
   x17: 0000000000000000 x16: 0000000000000000
   x15: ffff000015b70068 x14: 0000000000000005
   x13: 0003142cc1be1768 x12: 0000000000000001
   x11: ffff8001f6de9100 x10: 0000000000000009
   x9 : ffff000015b78000 x8 : 0000000000000000
   x7 : 0000000000000001 x6 : fffffffffffff000
   x5 : 0000000000000fff x4 : ffff00001065dbc8
   x3 : 000000000000000d x2 : 0000000000001000
   x1 : fffffffffffff000 x0 : 0000000000000000
   Call trace:
    __iommu_dma_unmap+0xb8/0xc0
    iommu_dma_unmap_sg+0x98/0xb8
    put_pages+0x5c/0xf0 [msm]
    msm_gem_free_work+0x10c/0x150 [msm]
    process_one_work+0x1e0/0x330
    worker_thread+0x40/0x438
    kthread+0x12c/0x130
    ret_from_fork+0x10/0x18
   ---[ end trace afc0dc5ab81a06bf ]---

Not quite sure what triggered that, but we really shouldn't be abusing
dma_{map,unmap}_sg() for cache maint.

Cc: Stephen Boyd &lt;sboyd@kernel.org&gt;
Tested-by: Stephen Boyd &lt;swboyd@chromium.org&gt;
Reviewed-by: Jordan Crouse &lt;jcrouse@codeaurora.org&gt;
Signed-off-by: Rob Clark &lt;robdclark@chromium.org&gt;
Signed-off-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20190630124735.27786-1-robdclark@gmail.com
Signed-off-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0036bc73ccbe7e600a3468bf8e8879b122252274 upstream.

Recently splats like this started showing up:

   WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0
   Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide
   CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G        W         5.2.0-rc5-next-20190619+ #2317
   Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018
   Workqueue: msm msm_gem_free_work [msm]
   pstate: 80c00005 (Nzcv daif +PAN +UAO)
   pc : __iommu_dma_unmap+0xb8/0xc0
   lr : __iommu_dma_unmap+0x54/0xc0
   sp : ffff0000119abce0
   x29: ffff0000119abce0 x28: 0000000000000000
   x27: ffff8001f9946648 x26: ffff8001ec271068
   x25: 0000000000000000 x24: ffff8001ea3580a8
   x23: ffff8001f95ba010 x22: ffff80018e83ba88
   x21: ffff8001e548f000 x20: fffffffffffff000
   x19: 0000000000001000 x18: 00000000c00001fe
   x17: 0000000000000000 x16: 0000000000000000
   x15: ffff000015b70068 x14: 0000000000000005
   x13: 0003142cc1be1768 x12: 0000000000000001
   x11: ffff8001f6de9100 x10: 0000000000000009
   x9 : ffff000015b78000 x8 : 0000000000000000
   x7 : 0000000000000001 x6 : fffffffffffff000
   x5 : 0000000000000fff x4 : ffff00001065dbc8
   x3 : 000000000000000d x2 : 0000000000001000
   x1 : fffffffffffff000 x0 : 0000000000000000
   Call trace:
    __iommu_dma_unmap+0xb8/0xc0
    iommu_dma_unmap_sg+0x98/0xb8
    put_pages+0x5c/0xf0 [msm]
    msm_gem_free_work+0x10c/0x150 [msm]
    process_one_work+0x1e0/0x330
    worker_thread+0x40/0x438
    kthread+0x12c/0x130
    ret_from_fork+0x10/0x18
   ---[ end trace afc0dc5ab81a06bf ]---

Not quite sure what triggered that, but we really shouldn't be abusing
dma_{map,unmap}_sg() for cache maint.

Cc: Stephen Boyd &lt;sboyd@kernel.org&gt;
Tested-by: Stephen Boyd &lt;swboyd@chromium.org&gt;
Reviewed-by: Jordan Crouse &lt;jcrouse@codeaurora.org&gt;
Signed-off-by: Rob Clark &lt;robdclark@chromium.org&gt;
Signed-off-by: Sean Paul &lt;seanpaul@chromium.org&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20190630124735.27786-1-robdclark@gmail.com
Signed-off-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>drm/etnaviv: replace MMU flush marker with flush sequence</title>
<updated>2020-04-13T08:45:01+00:00</updated>
<author>
<name>Lucas Stach</name>
<email>l.stach@pengutronix.de</email>
</author>
<published>2019-07-05T17:17:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=3c62781195f6d74508383dbe394679cbbe8417ab'/>
<id>3c62781195f6d74508383dbe394679cbbe8417ab</id>
<content type='text'>
commit 4900dda90af2cb13bc1d4c12ce94b98acc8fe64e upstream.

If a MMU is shared between multiple GPUs, all of them need to flush their
TLBs, so a single marker that gets reset on the first flush won't do.
Replace the flush marker with a sequence number, so that it's possible to
check if the TLB is in sync with the current page table state for each GPU.

Signed-off-by: Lucas Stach &lt;l.stach@pengutronix.de&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Reviewed-by: Guido Günther &lt;agx@sigxcpu.org&gt;
Signed-off-by: Robert Beckett &lt;bob.beckett@collabora.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 4900dda90af2cb13bc1d4c12ce94b98acc8fe64e upstream.

If a MMU is shared between multiple GPUs, all of them need to flush their
TLBs, so a single marker that gets reset on the first flush won't do.
Replace the flush marker with a sequence number, so that it's possible to
check if the TLB is in sync with the current page table state for each GPU.

Signed-off-by: Lucas Stach &lt;l.stach@pengutronix.de&gt;
Reviewed-by: Philipp Zabel &lt;p.zabel@pengutronix.de&gt;
Reviewed-by: Guido Günther &lt;agx@sigxcpu.org&gt;
Signed-off-by: Robert Beckett &lt;bob.beckett@collabora.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>drm/amdgpu: fix typo for vcn1 idle check</title>
<updated>2020-04-13T08:45:00+00:00</updated>
<author>
<name>James Zhu</name>
<email>James.Zhu@amd.com</email>
</author>
<published>2020-03-18T21:09:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=7b9d4492808eb3c3ba43f6391b138101a7e9e42e'/>
<id>7b9d4492808eb3c3ba43f6391b138101a7e9e42e</id>
<content type='text'>
[ Upstream commit acfc62dc68770aa665cc606891f6df7d6d1e52c0 ]

fix typo for vcn1 idle check

Signed-off-by: James Zhu &lt;James.Zhu@amd.com&gt;
Reviewed-by: Leo Liu &lt;leo.liu@amd.com&gt;
Signed-off-by: Alex Deucher &lt;alexander.deucher@amd.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit acfc62dc68770aa665cc606891f6df7d6d1e52c0 ]

fix typo for vcn1 idle check

Signed-off-by: James Zhu &lt;James.Zhu@amd.com&gt;
Reviewed-by: Leo Liu &lt;leo.liu@amd.com&gt;
Signed-off-by: Alex Deucher &lt;alexander.deucher@amd.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/bochs: downgrade pci_request_region failure from error to warning</title>
<updated>2020-04-13T08:44:59+00:00</updated>
<author>
<name>Gerd Hoffmann</name>
<email>kraxel@redhat.com</email>
</author>
<published>2020-03-13T08:41:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=236c445eb3529aa7c976f8812513c3cb26d77e27'/>
<id>236c445eb3529aa7c976f8812513c3cb26d77e27</id>
<content type='text'>
[ Upstream commit 8c34cd1a7f089dc03933289c5d4a4d1489549828 ]

Shutdown of firmware framebuffer has a bunch of problems.  Because
of this the framebuffer region might still be reserved even after
drm_fb_helper_remove_conflicting_pci_framebuffers() returned.

Don't consider pci_request_region() failure for the framebuffer
region as fatal error to workaround this issue.

Reported-by: Marek Marczykowski-Górecki &lt;marmarek@invisiblethingslab.com&gt;
Signed-off-by: Gerd Hoffmann &lt;kraxel@redhat.com&gt;
Acked-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 8c34cd1a7f089dc03933289c5d4a4d1489549828 ]

Shutdown of firmware framebuffer has a bunch of problems.  Because
of this the framebuffer region might still be reserved even after
drm_fb_helper_remove_conflicting_pci_framebuffers() returned.

Don't consider pci_request_region() failure for the framebuffer
region as fatal error to workaround this issue.

Reported-by: Marek Marczykowski-Górecki &lt;marmarek@invisiblethingslab.com&gt;
Signed-off-by: Gerd Hoffmann &lt;kraxel@redhat.com&gt;
Acked-by: Sam Ravnborg &lt;sam@ravnborg.org&gt;
Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017</title>
<updated>2020-04-13T08:44:59+00:00</updated>
<author>
<name>Mario Kleiner</name>
<email>mario.kleiner.de@gmail.com</email>
</author>
<published>2020-02-28T21:36:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=a9049fd69bc4fdcc48ec3a638f1f470938354984'/>
<id>a9049fd69bc4fdcc48ec3a638f1f470938354984</id>
<content type='text'>
[ Upstream commit dec9de2ada523b344eb2428abfedf9d6cd0a0029 ]

This fixes a problem found on the MacBookPro 2017 Retina panel:

The panel reports 10 bpc color depth in its EDID, and the
firmware chooses link settings at boot which support enough
bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2
aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports
2.7 Gbps (multiplier value 0xa) as possible, in direct
contradiction of what the firmware successfully set up.

This restricts the panel to 8 bpc, not providing the full
color depth of the panel on Linux &lt;= 5.5. Additionally, commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")'
introduced into Linux 5.6-rc1 will unclamp panel depth to
its full 10 bpc, thereby requiring a eDP bandwidth for all
modes that exceeds the bandwidth available and causes all modes
to fail validation -&gt; No modes for the laptop panel -&gt; failure
to set any mode -&gt; Panel goes dark.

This patch adds a quirk specific to the MBP 2017 15" Retina
panel to override reported max link rate to the correct maximum
of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display
precision.

Please apply for Linux 5.6+ to avoid regressing Apple MBP panel
support.

Signed-off-by: Mario Kleiner &lt;mario.kleiner.de@gmail.com&gt;
Signed-off-by: Alex Deucher &lt;alexander.deucher@amd.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit dec9de2ada523b344eb2428abfedf9d6cd0a0029 ]

This fixes a problem found on the MacBookPro 2017 Retina panel:

The panel reports 10 bpc color depth in its EDID, and the
firmware chooses link settings at boot which support enough
bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2
aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports
2.7 Gbps (multiplier value 0xa) as possible, in direct
contradiction of what the firmware successfully set up.

This restricts the panel to 8 bpc, not providing the full
color depth of the panel on Linux &lt;= 5.5. Additionally, commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")'
introduced into Linux 5.6-rc1 will unclamp panel depth to
its full 10 bpc, thereby requiring a eDP bandwidth for all
modes that exceeds the bandwidth available and causes all modes
to fail validation -&gt; No modes for the laptop panel -&gt; failure
to set any mode -&gt; Panel goes dark.

This patch adds a quirk specific to the MBP 2017 15" Retina
panel to override reported max link rate to the correct maximum
of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display
precision.

Please apply for Linux 5.6+ to avoid regressing Apple MBP panel
support.

Signed-off-by: Mario Kleiner &lt;mario.kleiner.de@gmail.com&gt;
Signed-off-by: Alex Deucher &lt;alexander.deucher@amd.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "drm/dp_mst: Skip validating ports during destruction, just ref"</title>
<updated>2020-04-02T13:28:10+00:00</updated>
<author>
<name>Lyude Paul</name>
<email>lyude@redhat.com</email>
</author>
<published>2018-11-28T21:00:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=013b14652972949c5e8446b1e8ca9868780f5c7a'/>
<id>013b14652972949c5e8446b1e8ca9868780f5c7a</id>
<content type='text'>
commit 9765635b30756eb74e05e260ac812659c296cd28 upstream.

This reverts commit:

c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")

ugh.

In drm_dp_destroy_connector_work(), we have a pretty good chance of
freeing the actual struct drm_dp_mst_port. However, after destroying
things we send a hotplug through (*mgr-&gt;cbs-&gt;hotplug)(mgr) which is
where the problems start.

For i915, this calls all the way down to the fbcon probing helpers,
which start trying to access the port in a modeset.

[   45.062001] ==================================================================
[   45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180
[   45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53

[   45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G           O      4.20.0-rc4Lyude-Test+ #3
[   45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[   45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper]
[   45.062641] Call Trace:
[   45.062685]  dump_stack+0xbd/0x15a
[   45.062735]  ? dump_stack_print_info.cold.0+0x1b/0x1b
[   45.062801]  ? printk+0x9f/0xc5
[   45.062847]  ? kmsg_dump_rewind_nolock+0xe4/0xe4
[   45.062909]  ? ex_handler_refcount+0x146/0x180
[   45.062970]  print_address_description+0x71/0x239
[   45.063036]  ? ex_handler_refcount+0x146/0x180
[   45.063095]  kasan_report.cold.5+0x242/0x30b
[   45.063155]  __asan_report_store4_noabort+0x1c/0x20
[   45.063313]  ex_handler_refcount+0x146/0x180
[   45.063371]  ? ex_handler_clear_fs+0xb0/0xb0
[   45.063428]  fixup_exception+0x98/0xd7
[   45.063484]  ? raw_notifier_call_chain+0x20/0x20
[   45.063548]  do_trap+0x6d/0x210
[   45.063605]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.063732]  do_error_trap+0xc0/0x170
[   45.063802]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.063929]  do_invalid_op+0x3b/0x50
[   45.063997]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.064103]  invalid_op+0x14/0x20
[   45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 &lt;0f&gt; 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f
[   45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282
[   45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968
[   45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8
[   45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3
[   45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28
[   45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8
[   45.065084]  drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper]
[   45.065225]  intel_mst_disable_dp+0xda/0x180 [i915]
[   45.065361]  intel_encoders_disable.isra.107+0x197/0x310 [i915]
[   45.065498]  haswell_crtc_disable+0xbe/0x400 [i915]
[   45.065622]  ? i9xx_disable_plane+0x1c0/0x3e0 [i915]
[   45.065750]  intel_atomic_commit_tail+0x74e/0x3e60 [i915]
[   45.065884]  ? intel_pre_plane_update+0xbc0/0xbc0 [i915]
[   45.065968]  ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper]
[   45.066054]  ? kasan_check_write+0x14/0x20
[   45.066165]  ? i915_gem_track_fb+0x13a/0x330 [i915]
[   45.066277]  ? i915_sw_fence_complete+0xe9/0x140 [i915]
[   45.066406]  ? __i915_sw_fence_complete+0xc50/0xc50 [i915]
[   45.066540]  intel_atomic_commit+0x72e/0xef0 [i915]
[   45.066635]  ? drm_dev_dbg+0x200/0x200 [drm]
[   45.066764]  ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[   45.066898]  ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[   45.067001]  drm_atomic_commit+0xc4/0xf0 [drm]
[   45.067074]  restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper]
[   45.067166]  ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper]
[   45.067249]  ? kasan_check_read+0x11/0x20
[   45.067324]  restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper]
[   45.067364]  ? kasan_check_read+0x11/0x20
[   45.067406]  drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper]
[   45.067462]  ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper]
[   45.067508]  ? kasan_check_write+0x14/0x20
[   45.070360]  ? mutex_unlock+0x22/0x40
[   45.073748]  drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper]
[   45.075846]  drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper]
[   45.078088]  drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper]
[   45.082614]  intel_fbdev_output_poll_changed+0x9f/0x140 [i915]
[   45.087069]  drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper]
[   45.089319]  intel_dp_mst_hotplug+0x37/0x50 [i915]
[   45.091496]  drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper]
[   45.093675]  ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper]
[   45.095851]  ? kasan_check_write+0x14/0x20
[   45.098473]  ? kasan_check_read+0x11/0x20
[   45.101155]  ? strscpy+0x17c/0x530
[   45.103808]  ? __switch_to_asm+0x34/0x70
[   45.106456]  ? syscall_return_via_sysret+0xf/0x7f
[   45.109711]  ? read_word_at_a_time+0x20/0x20
[   45.113138]  ? __switch_to_asm+0x40/0x70
[   45.116529]  ? __switch_to_asm+0x34/0x70
[   45.119891]  ? __switch_to_asm+0x40/0x70
[   45.123224]  ? __switch_to_asm+0x34/0x70
[   45.126540]  ? __switch_to_asm+0x34/0x70
[   45.129824]  process_one_work+0x88d/0x15d0
[   45.133172]  ? pool_mayday_timeout+0x850/0x850
[   45.136459]  ? pci_mmcfg_check_reserved+0x110/0x128
[   45.139739]  ? wake_q_add+0xb0/0xb0
[   45.143010]  ? check_preempt_wakeup+0x652/0x1050
[   45.146304]  ? worker_enter_idle+0x29e/0x740
[   45.149589]  ? __schedule+0x1ec0/0x1ec0
[   45.152937]  ? kasan_check_read+0x11/0x20
[   45.156179]  ? _raw_spin_lock_irq+0xa3/0x130
[   45.159382]  ? _raw_read_unlock_irqrestore+0x30/0x30
[   45.162542]  ? kasan_check_write+0x14/0x20
[   45.165657]  worker_thread+0x1a5/0x1470
[   45.168725]  ? set_load_weight+0x2e0/0x2e0
[   45.171755]  ? process_one_work+0x15d0/0x15d0
[   45.174806]  ? __switch_to_asm+0x34/0x70
[   45.177645]  ? __switch_to_asm+0x40/0x70
[   45.180323]  ? __switch_to_asm+0x34/0x70
[   45.182936]  ? __switch_to_asm+0x40/0x70
[   45.185539]  ? __switch_to_asm+0x34/0x70
[   45.188100]  ? __switch_to_asm+0x40/0x70
[   45.190628]  ? __schedule+0x7d4/0x1ec0
[   45.193143]  ? save_stack+0xa9/0xd0
[   45.195632]  ? kasan_check_write+0x10/0x20
[   45.198162]  ? kasan_kmalloc+0xc4/0xe0
[   45.200609]  ? kmem_cache_alloc_trace+0xdd/0x190
[   45.203046]  ? kthread+0x9f/0x3b0
[   45.205470]  ? ret_from_fork+0x35/0x40
[   45.207876]  ? unwind_next_frame+0x43/0x50
[   45.210273]  ? __save_stack_trace+0x82/0x100
[   45.212658]  ? deactivate_slab.isra.67+0x3d4/0x580
[   45.215026]  ? default_wake_function+0x35/0x50
[   45.217399]  ? kasan_check_read+0x11/0x20
[   45.219825]  ? _raw_spin_lock_irqsave+0xae/0x140
[   45.222174]  ? __lock_text_start+0x8/0x8
[   45.224521]  ? replenish_dl_entity.cold.62+0x4f/0x4f
[   45.226868]  ? __kthread_parkme+0x87/0xf0
[   45.229200]  kthread+0x2f7/0x3b0
[   45.231557]  ? process_one_work+0x15d0/0x15d0
[   45.233923]  ? kthread_park+0x120/0x120
[   45.236249]  ret_from_fork+0x35/0x40

[   45.240875] Allocated by task 242:
[   45.243136]  save_stack+0x43/0xd0
[   45.245385]  kasan_kmalloc+0xc4/0xe0
[   45.247597]  kmem_cache_alloc_trace+0xdd/0x190
[   45.249793]  drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper]
[   45.252000]  drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper]
[   45.254389]  drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper]
[   45.256803]  drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper]
[   45.259200]  process_one_work+0x88d/0x15d0
[   45.261597]  worker_thread+0x1a5/0x1470
[   45.264038]  kthread+0x2f7/0x3b0
[   45.266371]  ret_from_fork+0x35/0x40

[   45.270937] Freed by task 53:
[   45.273170]  save_stack+0x43/0xd0
[   45.275382]  __kasan_slab_free+0x139/0x190
[   45.277604]  kasan_slab_free+0xe/0x10
[   45.279826]  kfree+0x99/0x1b0
[   45.282044]  drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper]
[   45.284330]  drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper]
[   45.286660]  process_one_work+0x88d/0x15d0
[   45.288934]  worker_thread+0x1a5/0x1470
[   45.291231]  kthread+0x2f7/0x3b0
[   45.293547]  ret_from_fork+0x35/0x40

[   45.298206] The buggy address belongs to the object at ffff8882b4b70968
                which belongs to the cache kmalloc-2k of size 2048
[   45.303047] The buggy address is located 0 bytes inside of
                2048-byte region [ffff8882b4b70968, ffff8882b4b71168)
[   45.308010] The buggy address belongs to the page:
[   45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0
[   45.313051] flags: 0x8000000000010200(slab|head)
[   45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40
[   45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[   45.320966] page dumped because: kasan: bad access detected

[   45.326312] Memory state around the buggy address:
[   45.329085]  ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   45.331845]  ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   45.334584] &gt;ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[   45.337302]                                                           ^
[   45.340061]  ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   45.342910]  ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   45.345748] ==================================================================

So, this definitely isn't a fix that we want. This being said; there's
no real easy fix for this problem because of some of the catch-22's of
the MST helpers current design. For starters; we always need to validate
a port with drm_dp_get_validated_port_ref(), but validation relies on
the lifetime of the port in the actual topology. So once the port is
gone, it can't be validated again.

If we were to try to make the payload helpers not use port validation,
then we'd cause another problem: if the port isn't validated, it could
be freed and we'd just start causing more KASAN issues. There are
already hacks that attempt to workaround this in
drm_dp_mst_destroy_connector_work() by re-initializing the kref so that
it can be used again and it's memory can be freed once the VCPI helpers
finish removing the port's respective payloads. But none of these really
do anything helpful since the port still can't be validated since it's
gone from the topology. Also, that workaround is immensely confusing to
read through.

What really needs to be done in order to fix this is to teach DRM how to
track the lifetime of the structs for MST ports and branch devices
separately from their lifetime in the actual topology. Simply put; this
means having two different krefs-one that removes the port/branch device
from the topology, and one that finally calls kfree(). This would let us
simplify things, since we'd now be able to keep ports around without
having to keep them in the topology at the same time, which is exactly
what we need in order to teach our VCPI helpers to only validate ports
when it's actually necessary without running the risk of trying to use
unallocated memory.

Such a fix is on it's way, but for now let's play it safe and just
revert this. If this bug has been around for well over a year, we can
wait a little while to get an actual proper fix here.

Signed-off-by: Lyude Paul &lt;lyude@redhat.com&gt;
Fixes: c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
Cc: Daniel Vetter &lt;daniel@ffwll.ch&gt;
Cc: Sean Paul &lt;sean@poorly.run&gt;
Cc: Jerry Zuo &lt;Jerry.Zuo@amd.com&gt;
Cc: Harry Wentland &lt;Harry.Wentland@amd.com&gt;
Cc: stable@vger.kernel.org # v4.6+
Acked-by: Sean Paul &lt;sean@poorly.run&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20181128210005.24434-1-lyude@redhat.com
Cc: Guenter Roeck &lt;linux@roeck-us.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 9765635b30756eb74e05e260ac812659c296cd28 upstream.

This reverts commit:

c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")

ugh.

In drm_dp_destroy_connector_work(), we have a pretty good chance of
freeing the actual struct drm_dp_mst_port. However, after destroying
things we send a hotplug through (*mgr-&gt;cbs-&gt;hotplug)(mgr) which is
where the problems start.

For i915, this calls all the way down to the fbcon probing helpers,
which start trying to access the port in a modeset.

[   45.062001] ==================================================================
[   45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180
[   45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53

[   45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G           O      4.20.0-rc4Lyude-Test+ #3
[   45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[   45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper]
[   45.062641] Call Trace:
[   45.062685]  dump_stack+0xbd/0x15a
[   45.062735]  ? dump_stack_print_info.cold.0+0x1b/0x1b
[   45.062801]  ? printk+0x9f/0xc5
[   45.062847]  ? kmsg_dump_rewind_nolock+0xe4/0xe4
[   45.062909]  ? ex_handler_refcount+0x146/0x180
[   45.062970]  print_address_description+0x71/0x239
[   45.063036]  ? ex_handler_refcount+0x146/0x180
[   45.063095]  kasan_report.cold.5+0x242/0x30b
[   45.063155]  __asan_report_store4_noabort+0x1c/0x20
[   45.063313]  ex_handler_refcount+0x146/0x180
[   45.063371]  ? ex_handler_clear_fs+0xb0/0xb0
[   45.063428]  fixup_exception+0x98/0xd7
[   45.063484]  ? raw_notifier_call_chain+0x20/0x20
[   45.063548]  do_trap+0x6d/0x210
[   45.063605]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.063732]  do_error_trap+0xc0/0x170
[   45.063802]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.063929]  do_invalid_op+0x3b/0x50
[   45.063997]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.064103]  invalid_op+0x14/0x20
[   45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 &lt;0f&gt; 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f
[   45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282
[   45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968
[   45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8
[   45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3
[   45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28
[   45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8
[   45.065084]  drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper]
[   45.065225]  intel_mst_disable_dp+0xda/0x180 [i915]
[   45.065361]  intel_encoders_disable.isra.107+0x197/0x310 [i915]
[   45.065498]  haswell_crtc_disable+0xbe/0x400 [i915]
[   45.065622]  ? i9xx_disable_plane+0x1c0/0x3e0 [i915]
[   45.065750]  intel_atomic_commit_tail+0x74e/0x3e60 [i915]
[   45.065884]  ? intel_pre_plane_update+0xbc0/0xbc0 [i915]
[   45.065968]  ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper]
[   45.066054]  ? kasan_check_write+0x14/0x20
[   45.066165]  ? i915_gem_track_fb+0x13a/0x330 [i915]
[   45.066277]  ? i915_sw_fence_complete+0xe9/0x140 [i915]
[   45.066406]  ? __i915_sw_fence_complete+0xc50/0xc50 [i915]
[   45.066540]  intel_atomic_commit+0x72e/0xef0 [i915]
[   45.066635]  ? drm_dev_dbg+0x200/0x200 [drm]
[   45.066764]  ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[   45.066898]  ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[   45.067001]  drm_atomic_commit+0xc4/0xf0 [drm]
[   45.067074]  restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper]
[   45.067166]  ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper]
[   45.067249]  ? kasan_check_read+0x11/0x20
[   45.067324]  restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper]
[   45.067364]  ? kasan_check_read+0x11/0x20
[   45.067406]  drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper]
[   45.067462]  ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper]
[   45.067508]  ? kasan_check_write+0x14/0x20
[   45.070360]  ? mutex_unlock+0x22/0x40
[   45.073748]  drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper]
[   45.075846]  drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper]
[   45.078088]  drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper]
[   45.082614]  intel_fbdev_output_poll_changed+0x9f/0x140 [i915]
[   45.087069]  drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper]
[   45.089319]  intel_dp_mst_hotplug+0x37/0x50 [i915]
[   45.091496]  drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper]
[   45.093675]  ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper]
[   45.095851]  ? kasan_check_write+0x14/0x20
[   45.098473]  ? kasan_check_read+0x11/0x20
[   45.101155]  ? strscpy+0x17c/0x530
[   45.103808]  ? __switch_to_asm+0x34/0x70
[   45.106456]  ? syscall_return_via_sysret+0xf/0x7f
[   45.109711]  ? read_word_at_a_time+0x20/0x20
[   45.113138]  ? __switch_to_asm+0x40/0x70
[   45.116529]  ? __switch_to_asm+0x34/0x70
[   45.119891]  ? __switch_to_asm+0x40/0x70
[   45.123224]  ? __switch_to_asm+0x34/0x70
[   45.126540]  ? __switch_to_asm+0x34/0x70
[   45.129824]  process_one_work+0x88d/0x15d0
[   45.133172]  ? pool_mayday_timeout+0x850/0x850
[   45.136459]  ? pci_mmcfg_check_reserved+0x110/0x128
[   45.139739]  ? wake_q_add+0xb0/0xb0
[   45.143010]  ? check_preempt_wakeup+0x652/0x1050
[   45.146304]  ? worker_enter_idle+0x29e/0x740
[   45.149589]  ? __schedule+0x1ec0/0x1ec0
[   45.152937]  ? kasan_check_read+0x11/0x20
[   45.156179]  ? _raw_spin_lock_irq+0xa3/0x130
[   45.159382]  ? _raw_read_unlock_irqrestore+0x30/0x30
[   45.162542]  ? kasan_check_write+0x14/0x20
[   45.165657]  worker_thread+0x1a5/0x1470
[   45.168725]  ? set_load_weight+0x2e0/0x2e0
[   45.171755]  ? process_one_work+0x15d0/0x15d0
[   45.174806]  ? __switch_to_asm+0x34/0x70
[   45.177645]  ? __switch_to_asm+0x40/0x70
[   45.180323]  ? __switch_to_asm+0x34/0x70
[   45.182936]  ? __switch_to_asm+0x40/0x70
[   45.185539]  ? __switch_to_asm+0x34/0x70
[   45.188100]  ? __switch_to_asm+0x40/0x70
[   45.190628]  ? __schedule+0x7d4/0x1ec0
[   45.193143]  ? save_stack+0xa9/0xd0
[   45.195632]  ? kasan_check_write+0x10/0x20
[   45.198162]  ? kasan_kmalloc+0xc4/0xe0
[   45.200609]  ? kmem_cache_alloc_trace+0xdd/0x190
[   45.203046]  ? kthread+0x9f/0x3b0
[   45.205470]  ? ret_from_fork+0x35/0x40
[   45.207876]  ? unwind_next_frame+0x43/0x50
[   45.210273]  ? __save_stack_trace+0x82/0x100
[   45.212658]  ? deactivate_slab.isra.67+0x3d4/0x580
[   45.215026]  ? default_wake_function+0x35/0x50
[   45.217399]  ? kasan_check_read+0x11/0x20
[   45.219825]  ? _raw_spin_lock_irqsave+0xae/0x140
[   45.222174]  ? __lock_text_start+0x8/0x8
[   45.224521]  ? replenish_dl_entity.cold.62+0x4f/0x4f
[   45.226868]  ? __kthread_parkme+0x87/0xf0
[   45.229200]  kthread+0x2f7/0x3b0
[   45.231557]  ? process_one_work+0x15d0/0x15d0
[   45.233923]  ? kthread_park+0x120/0x120
[   45.236249]  ret_from_fork+0x35/0x40

[   45.240875] Allocated by task 242:
[   45.243136]  save_stack+0x43/0xd0
[   45.245385]  kasan_kmalloc+0xc4/0xe0
[   45.247597]  kmem_cache_alloc_trace+0xdd/0x190
[   45.249793]  drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper]
[   45.252000]  drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper]
[   45.254389]  drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper]
[   45.256803]  drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper]
[   45.259200]  process_one_work+0x88d/0x15d0
[   45.261597]  worker_thread+0x1a5/0x1470
[   45.264038]  kthread+0x2f7/0x3b0
[   45.266371]  ret_from_fork+0x35/0x40

[   45.270937] Freed by task 53:
[   45.273170]  save_stack+0x43/0xd0
[   45.275382]  __kasan_slab_free+0x139/0x190
[   45.277604]  kasan_slab_free+0xe/0x10
[   45.279826]  kfree+0x99/0x1b0
[   45.282044]  drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper]
[   45.284330]  drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper]
[   45.286660]  process_one_work+0x88d/0x15d0
[   45.288934]  worker_thread+0x1a5/0x1470
[   45.291231]  kthread+0x2f7/0x3b0
[   45.293547]  ret_from_fork+0x35/0x40

[   45.298206] The buggy address belongs to the object at ffff8882b4b70968
                which belongs to the cache kmalloc-2k of size 2048
[   45.303047] The buggy address is located 0 bytes inside of
                2048-byte region [ffff8882b4b70968, ffff8882b4b71168)
[   45.308010] The buggy address belongs to the page:
[   45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0
[   45.313051] flags: 0x8000000000010200(slab|head)
[   45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40
[   45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[   45.320966] page dumped because: kasan: bad access detected

[   45.326312] Memory state around the buggy address:
[   45.329085]  ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   45.331845]  ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   45.334584] &gt;ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[   45.337302]                                                           ^
[   45.340061]  ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   45.342910]  ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   45.345748] ==================================================================

So, this definitely isn't a fix that we want. This being said; there's
no real easy fix for this problem because of some of the catch-22's of
the MST helpers current design. For starters; we always need to validate
a port with drm_dp_get_validated_port_ref(), but validation relies on
the lifetime of the port in the actual topology. So once the port is
gone, it can't be validated again.

If we were to try to make the payload helpers not use port validation,
then we'd cause another problem: if the port isn't validated, it could
be freed and we'd just start causing more KASAN issues. There are
already hacks that attempt to workaround this in
drm_dp_mst_destroy_connector_work() by re-initializing the kref so that
it can be used again and it's memory can be freed once the VCPI helpers
finish removing the port's respective payloads. But none of these really
do anything helpful since the port still can't be validated since it's
gone from the topology. Also, that workaround is immensely confusing to
read through.

What really needs to be done in order to fix this is to teach DRM how to
track the lifetime of the structs for MST ports and branch devices
separately from their lifetime in the actual topology. Simply put; this
means having two different krefs-one that removes the port/branch device
from the topology, and one that finally calls kfree(). This would let us
simplify things, since we'd now be able to keep ports around without
having to keep them in the topology at the same time, which is exactly
what we need in order to teach our VCPI helpers to only validate ports
when it's actually necessary without running the risk of trying to use
unallocated memory.

Such a fix is on it's way, but for now let's play it safe and just
revert this. If this bug has been around for well over a year, we can
wait a little while to get an actual proper fix here.

Signed-off-by: Lyude Paul &lt;lyude@redhat.com&gt;
Fixes: c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
Cc: Daniel Vetter &lt;daniel@ffwll.ch&gt;
Cc: Sean Paul &lt;sean@poorly.run&gt;
Cc: Jerry Zuo &lt;Jerry.Zuo@amd.com&gt;
Cc: Harry Wentland &lt;Harry.Wentland@amd.com&gt;
Cc: stable@vger.kernel.org # v4.6+
Acked-by: Sean Paul &lt;sean@poorly.run&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20181128210005.24434-1-lyude@redhat.com
Cc: Guenter Roeck &lt;linux@roeck-us.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>drm/bridge: dw-hdmi: fix AVI frame colorimetry</title>
<updated>2020-03-25T07:06:15+00:00</updated>
<author>
<name>Jernej Skrabec</name>
<email>jernej.skrabec@siol.net</email>
</author>
<published>2020-03-04T23:25:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=21213fb67401a6ad5ea3d36d8b404ce4c40a316a'/>
<id>21213fb67401a6ad5ea3d36d8b404ce4c40a316a</id>
<content type='text'>
commit e8dca30f7118461d47e1c3510d0e31b277439151 upstream.

CTA-861-F explicitly states that for RGB colorspace colorimetry should
be set to "none". Fix that.

Acked-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit e8dca30f7118461d47e1c3510d0e31b277439151 upstream.

CTA-861-F explicitly states that for RGB colorspace colorimetry should
be set to "none". Fix that.

Acked-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>drm/lease: fix WARNING in idr_destroy</title>
<updated>2020-03-25T07:06:12+00:00</updated>
<author>
<name>Qiujun Huang</name>
<email>hqjagain@gmail.com</email>
</author>
<published>2020-03-18T07:53:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=7693c8fedb00329938a43b1d39044e414f7d3844'/>
<id>7693c8fedb00329938a43b1d39044e414f7d3844</id>
<content type='text'>
commit b216a8e7908cd750550c0480cf7d2b3a37f06954 upstream.

drm_lease_create takes ownership of leases. And leases will be released
by drm_master_put.

drm_master_put
    -&gt;drm_master_destroy
            -&gt;idr_destroy

So we needn't call idr_destroy again.

Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang &lt;hqjagain@gmail.com&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter &lt;daniel.vetter@ffwll.ch&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit b216a8e7908cd750550c0480cf7d2b3a37f06954 upstream.

drm_lease_create takes ownership of leases. And leases will be released
by drm_master_put.

drm_master_put
    -&gt;drm_master_destroy
            -&gt;idr_destroy

So we needn't call idr_destroy again.

Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang &lt;hqjagain@gmail.com&gt;
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter &lt;daniel.vetter@ffwll.ch&gt;
Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
</feed>
