linux.git/drivers/gpu, branch v4.4.300

drm/amdgpu: Fix a NULL pointer dereference in amdgpu_connector_lcd_native_mode()

2022-01-27T07:46:14+00:00

[ Upstream commit b220110e4cd442156f36e1d9b4914bb9e87b0d00 ]

In amdgpu_connector_lcd_native_mode(), the return value of
drm_mode_duplicate() is assigned to mode, and there is a dereference
of it in amdgpu_connector_lcd_native_mode(), which will lead to a NULL
pointer dereference on failure of drm_mode_duplicate().

Fix this bug add a check of mode.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_DRM_AMDGPU=m show no new warnings, and
our static analyzer no longer warns about this code.

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Zhou Qingyang 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/i915: Avoid bitwise vs logical OR warning in snb_wm_latency_quirk()

2022-01-27T07:46:12+00:00

commit 2e70570656adfe1c5d9a29940faa348d5f132199 upstream.

A new warning in clang points out a place in this file where a bitwise
OR is being used with boolean types:

drivers/gpu/drm/i915/intel_pm.c:3066:12: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
        changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) |
                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This construct is intentional, as it allows every one of the calls to
ilk_increase_wm_latency() to occur (instead of short circuiting with
logical OR) while still caring about the result of each call.

To make this clearer to the compiler, use the '|=' operator to assign
the result of each ilk_increase_wm_latency() call to changed, which
keeps the meaning of the code the same but makes it obvious that every
one of these calls is expected to happen.

Link: https://github.com/ClangBuiltLinux/linux/issues/1473
Reported-by: Nick Desaulniers 
Signed-off-by: Nathan Chancellor 
Suggested-by: Dávid Bolvanský 
Reviewed-by: Nick Desaulniers 
Signed-off-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20211014211916.3550122-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors

2021-11-26T10:58:44+00:00

commit bf552083916a7f8800477b5986940d1c9a31b953 upstream.

amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode
which assign amdgpu_encoder->native_mode with *preferred_mode result in
amdgpu_encoder->native_mode.clock always be 0. That will cause
amdgpu_connector_set_property returned early on:
if ((rmx_type != DRM_MODE_SCALE_NONE) &&
	(amdgpu_encoder->native_mode.clock == 0))
when we try to set scaling mode Full/Full aspect/Center.
Add the missing function to amdgpu_connector_vga_get_mode can fix this.
It also works on dvi connectors because
amdgpu_connector_dvi_helper_funcs.get_mode use the same method.

Signed-off-by: hongao 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

drm/udl: fix control-message timeout

2021-11-26T10:58:44+00:00

commit 5591c8f79db1729d9c5ac7f5b4d3a5c26e262d93 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: stable@vger.kernel.org      # 3.4
Signed-off-by: Johan Hovold 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20211025115353.5089-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

drm/msm: uninitialized variable in msm_gem_import()

2021-11-26T10:58:39+00:00

[ Upstream commit 2203bd0e5c12ffc53ffdd4fbd7b12d6ba27e0424 ]

The msm_gem_new_impl() function cleans up after itself so there is no
need to call drm_gem_object_put().  Conceptually, it does not make sense
to call a kref_put() function until after the reference counting has
been initialized which happens immediately after this call in the
drm_gem_(private_)object_init() functions.

In the msm_gem_import() function the "obj" pointer is uninitialized, so
it will lead to a crash.

Fixes: 05b849111c07 ("drm/msm: prime support")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/20211013081315.GG6010@kili
Signed-off-by: Rob Clark 
Signed-off-by: Sasha Levin

drm/msm: Fix null pointer dereference on pointer edp

2021-10-27T07:32:39+00:00

commit 2133c4fc8e1348dcb752f267a143fe2254613b34 upstream.

The initialization of pointer dev dereferences pointer edp before
edp is null checked, so there is a potential null pointer deference
issue. Fix this by only dereferencing edp after edp has been null
checked.

Addresses-Coverity: ("Dereference before null check")
Fixes: ab5b0107ccf3 ("drm/msm: Initial add eDP support in msm drm driver (v5)")
Signed-off-by: Colin Ian King 
Reviewed-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20210929121857.213922-1-colin.king@canonical.com
Signed-off-by: Rob Clark 
Signed-off-by: Greg Kroah-Hartman

drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV

2021-09-26T11:33:47+00:00

commit e8f71f89236ef82d449991bfbc237e3cb6ea584f upstream.

nvkm test builds fail with the following error.

  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info':
  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5'

The code builds on most architectures, but fails on parisc where ENOSYS
is defined as 251.

Replace the error code with -ENODEV (-19).  The actual error code does
not really matter and is not passed to userspace - it just has to be
negative.

Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs")
Signed-off-by: Guenter Roeck 
Cc: Ben Skeggs 
Cc: David Airlie 
Cc: Daniel Vetter 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port()

2021-09-22T09:41:25+00:00

[ Upstream commit a211260c34cfadc6068fece8c9e99e0fe1e2a2b6 ]

The variable val is declared without initialization, and its address is
passed to amdgpu_i2c_get_byte(). In this function, the value of val is
accessed in:
  DRM_DEBUG("i2c 0x%02x 0x%02x read failed\n",
       addr, *val);

Also, when amdgpu_i2c_get_byte() returns, val may remain uninitialized,
but it is accessed in:
  val &= ~amdgpu_connector->router.ddc_mux_control_pin;

To fix this possible uninitialized-variable access, initialize val to 0 in
amdgpu_i2c_router_select_ddc_port().

Reported-by: TOTE Robot 
Signed-off-by: Tuo Li 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/msm/dsi: Fix some reference counted resource leaks

2021-09-22T09:41:20+00:00

[ Upstream commit 6977cc89c87506ff17e6c05f0e37f46752256e82 ]

'of_find_device_by_node()' takes a reference that must be released when
not needed anymore.
This is expected to be done in 'dsi_destroy()'.

However, there are 2 issues in 'dsi_get_phy()'.

First, if 'of_find_device_by_node()' succeeds but 'platform_get_drvdata()'
returns NULL, 'msm_dsi->phy_dev' will still be NULL, and the reference
won't be released in 'dsi_destroy()'.

Secondly, as 'of_find_device_by_node()' already takes a reference, there is
no need for an additional 'get_device()'.

Move the assignment to 'msm_dsi->phy_dev' a few lines above and remove the
unneeded 'get_device()' to solve both issues.

Fixes: ec31abf6684e ("drm/msm/dsi: Separate PHY to another platform device")
Signed-off-by: Christophe JAILLET 
Link: https://lore.kernel.org/r/f15bc57648a00e7c99f943903468a04639d50596.1628241097.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rob Clark 
Signed-off-by: Sasha Levin

drm/virtio: Fix double free on probe failure

2021-07-20T14:22:37+00:00

[ Upstream commit cec7f1774605a5ef47c134af62afe7c75c30b0ee ]

The virtio_gpu_init() will free vgdev and vgdev->vbufs on failure.
But such failure will be caught by virtio_gpu_probe() and then
virtio_gpu_release() will be called to do some cleanup which
will free vgdev and vgdev->vbufs again. So let's set dev->dev_private
to NULL to avoid double free.

Signed-off-by: Xie Yongji 
Link: http://patchwork.freedesktop.org/patch/msgid/20210517084913.403-2-xieyongji@bytedance.com
Signed-off-by: Gerd Hoffmann 
Signed-off-by: Sasha Levin