Pull HID fixes from Jiri Kosina:

 - fix for sticky fingers handling in hid-multitouch (Benjamin
   Tissoires)

 - fix for reporting of 0 battery levels (Dmitry Torokhov)

 - build fix for hid-haptic in certain configurations (Jonathan Denose)

 - improved probe and avoiding spamming kernel log by hid-nintendo
   (Vicki Pfau)

 - fix for OOB in hid-cp2112 (Deepak Sharma)

 - interrupt handling fix for intel-thc-hid (Even Xu)

 - a couple of new device IDs and device-specific quirks

* tag 'hid-for-linus-2025101701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL
  selftests/hid: add tests for missing release on the Dell Synaptics
  HID: multitouch: fix sticky fingers
  HID: multitouch: fix name of Stylus input devices
  HID: hid-input: only ignore 0 battery events for digitizers
  HID: hid-debug: Fix spelling mistake "Rechargable" -> "Rechargeable"
  HID: Kconfig: Fix build error from CONFIG_HID_HAPTIC
  HID: nintendo: Rate limit IMU compensation message
  HID: nintendo: Wait longer for initial probe
  HID: core: Add printk_ratelimited variants to hid_warn() etc
  HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheel
  HID: quirks: avoid Cooler Master MM712 dongle wakeup bug
  HID: cp2112: Add parameter validation to data length
  HID: intel-thc-hid: intel-quickspi: Add ARL PCI Device Id's
  HID: intel-thc-hid: Intel-quickspi: switch first interrupt from level to edge detection
  HID: intel-thc-hid: intel-quicki2c: Fix wrong type casting

Temporarily change CONFIG_HID_HAPTIC to be bool instead of tristate, until
we implement a permanent solution.

Recently the CONFIG_HID_HAPTIC Kconfig option was reported as causing
the following build errors:

  MODPOST Module.symvers
ERROR: modpost: "hid_haptic_init" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_increase" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_check_pressure_unit" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_configured" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_feature_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_reset" [drivers/hid/hid-multitouch.ko] undefined!
make[3]: *** [/home/thl/var/linux.dev/scripts/Makefile.modpost:147: Module.symvers] Error 1

when the kernel is compiled with the following configuration:

CONFIG_HID=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_HAPTIC=m

To resolve this, temporarily change the CONFIG_HID_HAPTIC option to be
bool, until we arrive at a permanent solution to enable CONFIG_HID_HAPTIC
to be tristate.

For a more detailed discussion, see [1].

[1]: https://lore.kernel.org/linux-input/auypydfkhx2eg7vp764way4batdilzc35inqda3exwzs3tk3ff@oagat6g46zto/

Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Pull hyperv updates from Wei Liu:

 - Unify guest entry code for KVM and MSHV (Sean Christopherson)

 - Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
   (Nam Cao)

 - Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
   (Mukesh Rathor)

 - Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)

 - Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
   Kumar T S M)

 - Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
   Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)

* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hyperv: Remove the spurious null directive line
  MAINTAINERS: Mark hyperv_fb driver Obsolete
  fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
  Drivers: hv: Make CONFIG_HYPERV bool
  Drivers: hv: Add CONFIG_HYPERV_VMBUS option
  Drivers: hv: vmbus: Fix typos in vmbus_drv.c
  Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
  Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
  x86/hyperv: Switch to msi_create_parent_irq_domain()
  mshv: Use common "entry virt" APIs to do work in root before running guest
  entry: Rename "kvm" entry code assets to "virt" to genericize APIs
  entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
  mshv: Handle NEED_RESCHED_LAZY before transferring to guest
  x86/hyperv: Add kexec/kdump support on Azure CVMs
  Drivers: hv: Simplify data structures for VMBus channel close message
  Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
  mshv: Add support for a new parent partition configuration
  clocksource: hyper-v: Skip unnecessary checks for the root partition
  hyperv: Add missing field to hv_output_map_device_interrupt

At present VMBus driver is hinged off of CONFIG_HYPERV which entails
lot of builtin code and encompasses too much. It's not always clear
what depends on builtin hv code and what depends on VMBus. Setting
CONFIG_HYPERV as a module and fudging the Makefile to switch to builtin
adds even more confusion. VMBus is an independent module and should have
its own config option. Also, there are scenarios like baremetal dom0/root
where support is built in with CONFIG_HYPERV but without VMBus. Lastly,
there are more features coming down that use CONFIG_HYPERV and add more
dependencies on it.

So, create a fine grained HYPERV_VMBUS option and update Kconfigs for
dependency on VMBus.

Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>	# drivers/pci
Signed-off-by: Wei Liu <wei.liu@kernel.org>

- Implement haptic touchpad support (Angela Czubak and Jonathan Denose)

Define a new structure that contains simple haptic device configuration
as well as current state.
Add functions that recognize auto trigger and manual trigger reports
as well as save their addresses.
Verify that the pressure unit is either grams or newtons.
Mark the input device as a haptic touchpad if the unit is correct and
the reports are found.

Signed-off-by: Angela Czubak <aczubak@google.com>
Co-developed-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

Commit 84c9d2a968c82 ("HID: lenovo: Support for ThinkPad-X12-TAB-1/2 Kbd
Fn keys") added a dependency on ACPI's platform_profile. This should not
be done for generic USB devices as this prevents using the devices on
non ACPI devices like Apple silicon Macs and other non-ACPI arm64
systems. An attempt to allow using platform_profile on non-ACPI systems
was rejected in [1] and instead platform_profile was made to fail during
init in commit dd133162c9cf ("ACPI: platform_profile: Avoid initializing
on non-ACPI platforms").
So remove the broken dependency and instead let's user space handle this
keycode by sending the new KEY_PERFORMANCE. Stable backport depends on
commit 89c5214639294 ("Input: add keycode for performance mode key").

[1]: https://lore.kernel.org/linux-acpi/CAJZ5v0icRdTSToaKbdf=MdRin4NyB2MstUVaQo8VR6-n7DkVMQ@mail.gmail.com/

Cc: regressions@lists.linux.dev
Cc: stable@vger.kernel.org
Fixes: 84c9d2a968c82 ("HID: lenovo: Support for ThinkPad-X12-TAB-1/2 Kbd Fn keys")
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

There is a spelling mistake in the HID_U2FZERO description. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

This patch adds the device ID of Apple Touch Bar found on x86 MacBook Pros
to the hid-multitouch driver.

Note that this is device ID is for T2 Macs. Testing on T1 Macs would be
appreciated.

Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

The Apple Touch Bar is only present on x86 MacBook Pros.  Hence add a
dependency on X86, to prevent asking the user about this driver when
configuring a kernel for a different architecture.

Fixes: 1fd41e5e3d7cc556 ("HID: hid-appletb-bl: add driver for the backlight of Apple Touch Bars")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>