linux.git/drivers/hid, branch v5.10.213

HID: wacom: Do not register input devices until after hid_hw_start

2024-02-23T07:42:24+00:00

commit c1d6708bf0d3dd976460d435373cf5abf21ce258 upstream.

If a input device is opened before hid_hw_start is called, events may
not be received from the hardware. In the case of USB-backed devices,
for example, the hid_hw_start function is responsible for filling in
the URB which is submitted when the input device is opened. If a device
is opened prematurely, polling will never start because the device will
not have been in the correct state to send the URB.

Because the wacom driver registers its input devices before calling
hid_hw_start, there is a window of time where a device can be opened
and end up in an inoperable state. Some ARM-based Chromebooks in particular
reliably trigger this bug.

This commit splits the wacom_register_inputs function into two pieces.
One which is responsible for setting up the allocated inputs (and runs
prior to hid_hw_start so that devices are ready for any input events
they may end up receiving) and another which only registers the devices
(and runs after hid_hw_start to ensure devices can be immediately opened
without issue). Note that the functions to initialize the LEDs and remotes
are also moved after hid_hw_start to maintain their own dependency chains.

Fixes: 7704ac937345 ("HID: wacom: implement generic HID handling for pen generic devices")
Cc: stable@vger.kernel.org # v3.18+
Suggested-by: Dmitry Torokhov 
Signed-off-by: Jason Gerecke 
Tested-by: Dmitry Torokhov 
Signed-off-by: Jiri Kosina 
Signed-off-by: Greg Kroah-Hartman

HID: wacom: generic: Avoid reporting a serial of '0' to userspace

2024-02-23T07:42:24+00:00

commit ab41a31dd5e2681803642b6d08590b61867840ec upstream.

The xf86-input-wacom driver does not treat '0' as a valid serial
number and will drop any input report which contains an
MSC_SERIAL = 0 event. The kernel driver already takes care to
avoid sending any MSC_SERIAL event if the value of serial[0] == 0
(which is the case for devices that don't actually report a
serial number), but this is not quite sufficient.
Only the lower 32 bits of the serial get reported to userspace,
so if this portion of the serial is zero then there can still
be problems.

This commit allows the driver to report either the lower 32 bits
if they are non-zero or the upper 32 bits otherwise.

Signed-off-by: Jason Gerecke 
Signed-off-by: Tatsunosuke Tobita 
Fixes: f85c9dc678a5 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: stable@vger.kernel.org # v4.10
Signed-off-by: Jiri Kosina 
Signed-off-by: Greg Kroah-Hartman

HID: apple: Add 2021 magic keyboard FN key mapping

2024-02-23T07:42:17+00:00

commit 531cb56972f2773c941499fcfb639cd5128dfb27 upstream.

The new 2021 apple models have a different FN key assignment. Add a new
translation table and use that for the 2021 magic keyboard.

Signed-off-by: Benjamin Berg 
Signed-off-by: Jiri Kosina 
Cc: Aseda Aboagye 
Signed-off-by: Greg Kroah-Hartman

HID: apple: Add support for the 2021 Magic Keyboard

2024-02-23T07:42:17+00:00

commit 0cd3be51733febb4f8acb92bcf55b75fe824dd05 upstream.

Signed-off-by: Alex Henrie 
Signed-off-by: Jiri Kosina 
Cc: Aseda Aboagye 
Signed-off-by: Greg Kroah-Hartman

HID: wacom: Correct behavior when processing some confidence == false touches

2024-01-25T22:37:53+00:00

commit 502296030ec6b0329e00f9fb15018e170cc63037 upstream.

There appear to be a few different ways that Wacom devices can deal with
confidence:

  1. If the device looses confidence in a touch, it will first clear
     the tipswitch flag in one report, and then clear the confidence
     flag in a second report. This behavior is used by e.g. DTH-2452.

  2. If the device looses confidence in a touch, it will clear both
     the tipswitch and confidence flags within the same report. This
     behavior is used by some AES devices.

  3. If the device looses confidence in a touch, it will clear *only*
     the confidence bit. The tipswitch bit will remain set so long as
     the touch is tracked. This behavior may be used in future devices.

The driver does not currently handle situation 3 properly. Touches that
loose confidence will remain "in prox" and essentially frozen in place
until the tipswitch bit is finally cleared. Not only does this result
in userspace seeing a stuck touch, but it also prevents pen arbitration
from working properly (the pen won't send events until all touches are
up, but we don't currently process events from non-confident touches).

This commit centralizes the checking of the confidence bit in the
wacom_wac_finger_slot() function and has 'prox' depend on it. In the
case where situation 3 is encountered, the treat the touch as though
it was removed, allowing both userspace and the pen arbitration to
act normally.

Signed-off-by: Tatsunosuke Tobita 
Signed-off-by: Ping Cheng 
Signed-off-by: Jason Gerecke 
Fixes: 7fb0413baa7f ("HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina 
Signed-off-by: Greg Kroah-Hartman

HID: hid-asus: add const to read-only outgoing usb buffer

2023-12-20T14:44:36+00:00

[ Upstream commit 06ae5afce8cc1f7621cc5c7751e449ce20d68af7 ]

In the function asus_kbd_set_report the parameter buf is read-only
as it gets copied in a memory portion suitable for USB transfer,
but the parameter is not marked as const: add the missing const and mark
const immutable buffers passed to that function.

Signed-off-by: Denis Benato 
Signed-off-by: Luke D. Jones 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad

2023-12-20T14:44:35+00:00

[ Upstream commit 9ffccb691adb854e7b7f3ee57fbbda12ff70533f ]

Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch
mode until the input mode feature is written by the host.  The touchpad do
report the input mode at touchpad(3), while itself working under mouse mode. As
a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set
feature in mt_set_input_mode for such device.

The touchpad reports as BLTP7853, which cannot retrive any useful manufacture
information on the internel by this string at present.  As the serial number of
the laptop is GLO-G52, while DMI info reports the laptop serial number as
GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.

Signed-off-by: Aoba K 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: hid-asus: reset the backlight brightness level on resume

2023-12-20T14:44:34+00:00

[ Upstream commit 546edbd26cff7ae990e480a59150e801a06f77b1 ]

Some devices managed by this driver automatically set brightness to 0
before entering a suspended state and reset it back to a default
brightness level after the resume:
this has the effect of having the kernel report wrong brightness
status after a sleep, and on some devices (like the Asus RC71L) that
brightness is the intensity of LEDs directly facing the user.

Fix the above issue by setting back brightness to the level it had
before entering a sleep state.

Signed-off-by: Denis Benato 
Signed-off-by: Luke D. Jones 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: add ALWAYS_POLL quirk for Apple kb

2023-12-20T14:44:34+00:00

[ Upstream commit c55092187d9ad7b2f8f5a8645286fa03997d442f ]

These devices disconnect if suspended without remote wakeup. They can operate
with the standard driver.

Signed-off-by: Oliver Neukum 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: glorious: fix Glorious Model I HID report

2023-12-20T14:44:33+00:00

[ Upstream commit a5e913c25b6b2b6ae02acef6d9400645ac03dfdf ]

The Glorious Model I mouse has a buggy HID report descriptor for its
keyboard endpoint (used for programmable buttons). For report ID 2, there
is a mismatch between Logical Minimum and Usage Minimum in the array that
reports keycodes.

The offending portion of the descriptor: (from hid-decode)

0x95, 0x05,                    //  Report Count (5)                   30
0x75, 0x08,                    //  Report Size (8)                    32
0x15, 0x00,                    //  Logical Minimum (0)                34
0x25, 0x65,                    //  Logical Maximum (101)              36
0x05, 0x07,                    //  Usage Page (Keyboard)              38
0x19, 0x01,                    //  Usage Minimum (1)                  40
0x29, 0x65,                    //  Usage Maximum (101)                42
0x81, 0x00,                    //  Input (Data,Arr,Abs)               44

This bug shifts all programmed keycodes up by 1. Importantly, this causes
"empty" array indexes of 0x00 to be interpreted as 0x01, ErrorRollOver.
The presence of ErrorRollOver causes the system to ignore all keypresses
from the endpoint and breaks the ability to use the programmable buttons.

Setting byte 41 to 0x00 fixes this, and causes keycodes to be interpreted
correctly.

Also, USB_VENDOR_ID_GLORIOUS is changed to USB_VENDOR_ID_SINOWEALTH,
and a new ID for Laview Technology is added. Glorious seems to be
white-labeling controller boards or mice from these vendors. There isn't a
single canonical vendor ID for Glorious products.

Signed-off-by: Brett Raye 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin