linux.git/drivers/hwmon/Kconfig, branch v4.14.49

hwmon: (ltq-cputemp) add cpu temp sensor driver

2017-09-01T14:24:14+00:00

Add the lantiq cpu temperature sensor support for xrx200.

Signed-off-by: Florian Eckert 
Signed-off-by: Guenter Roeck

hwmon: (aspeed-pwm) add THERMAL dependency

2017-08-15T14:54:34+00:00

With CONFIG_THERMAL=m, a built-in aspeed pwm tacho driver causes
a link error:

drivers/hwmon/aspeed-pwm-tacho.o: In function `aspeed_pwm_tacho_probe':
aspeed-pwm-tacho.c:(.text+0x7f0): undefined reference to `thermal_of_cooling_device_register'

This adds a dependency similar to what other hwmon drivers use,
ensuring that the aspeed driver cannot be built-in in this
case but has to be a module. With THERMAL=n, we still allow building it.

Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Guenter Roeck

hwmon: (aspeed-pwm-tacho) Select REGMAP

2017-05-30T22:15:19+00:00

The driver uses regmap and thus has to select it to avoid build
errors such as the following.

drivers/hwmon/aspeed-pwm-tacho.c:337:21: error: variable
	'aspeed_pwm_tacho_regmap_config' has initializer but incomplete type

Reported-by: kbuild test robot 
Acked-by: Joel Stanley 
Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck

hwmon: (twl4030-madc) drop driver

2017-04-30T18:45:31+00:00

This driver is no longer needed:

 * It has no mainline users
 * It has no DT support and OMAP is DT only
 * iio-hwmon can be used for madc, which also works with DT

Signed-off-by: Sebastian Reichel 
Acked-by: Guenter Roeck 
Signed-off-by: Guenter Roeck

drivers: hwmon: Support for ASPEED PWM/Fan tach

2017-04-10T20:12:18+00:00

The ASPEED AST2400/2500 PWM controller supports 8 PWM output ports.
The ASPEED AST2400/2500 Fan tach controller supports 16 tachometer
inputs.
The device driver matches on the device tree node. The configuration
values are read from the device tree and written to the respective
registers.
The driver provides a sysfs entries through which the user can
configure the duty-cycle value (ranging from 0 to 100 percent) and read
the fan tach rpm value.

Signed-off-by: Jaghathiswari Rankappagounder Natarajan 
Signed-off-by: Guenter Roeck

hwmon: new driver for ST stts751 thermal sensor

2017-02-03T13:32:59+00:00

This patch adds a HWMON driver for ST Microelectronics STTS751
temperature sensors.

Thanks-to: LABBE Corentin [for suggestions]
Thanks-to: Guenter Roeck [for suggestion and discussions]
Signed-off-by: Andrea Merello 
Cc: LABBE Corentin 
Signed-off-by: Guenter Roeck

hwmon: Add Texas Instruments TMP108 temperature sensor driver.

2016-12-10T05:54:25+00:00

Add support for the TI TMP108 temperature sensor with some device
configuration parameters.

Signed-off-by: John Muir 
[groeck: Initialize of_match_table]
Signed-off-by: Guenter Roeck

hwmon: (lm90) Mention support for TI TMP451 in Kconfig description

2016-12-10T05:54:14+00:00

The lm90 driver also supports the Texas Instruments TMP451 sensor chip.
Since the Kconfig description for the driver includes a list of all
compatible chips, mention the TI TMP451 there as well.

Signed-off-by: Tobias Klauser 
Signed-off-by: Guenter Roeck

hwmon: Add tc654 driver

2016-12-02T21:28:05+00:00

Add support for the tc654 and tc655 fan controllers from Microchip.

http://ww1.microchip.com/downloads/en/DeviceDoc/20001734C.pdf

Signed-off-by: Chris Packham 
Acked-by: Rob Herring 
[groeck: Fixed continuation line alignments]
Signed-off-by: Guenter Roeck

hwmon: (lm95245) Select REGMAP_I2C

2016-09-13T14:27:34+00:00

This driver now uses regmap APIs, so it needs to select REGMAP_I2C.

Signed-off-by: Axel Lin 
Signed-off-by: Guenter Roeck