linux.git/drivers/hwmon/Kconfig, branch v6.6.16 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git hwmon: Add driver for Renesas HS3001 2023-08-21T13:04:30+00:00 Andre Werner andre.werner@systec-electronic.com 2023-07-25T04:22:07+00:00 43fbe66dc2164c03e7a58dfcf0ab737b2f12cc79 Add base support for Renesas HS3001 temperature and humidity sensors and its compatibles HS3002, HS3003 and HS3004. The sensor has a fix I2C address 0x44. The resolution is fixed to 14bit (ref. Missing feature). Missing feature: - Accessing non-volatile memory: Custom board has no possibility to control voltage supply of sensor. Thus, we cannot send the necessary control commands within the first 10ms after power-on. Signed-off-by: Andre Werner <andre.werner@systec-electronic.com> Link: https://lore.kernel.org/r/20230725042207.22310-2-andre.werner@systec-electronic.com [groeck: Cosmetic documentation fixup; added documentation to index; replaced probe_new with probe dropped unused variable] Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Add base support for Renesas HS3001 temperature
and humidity sensors and its compatibles HS3002,
HS3003 and HS3004.

The sensor has a fix I2C address 0x44. The resolution
is fixed to 14bit (ref. Missing feature).

Missing feature:
- Accessing non-volatile memory: Custom board has no
  possibility to control voltage supply of sensor. Thus,
  we cannot send the necessary control commands within
  the first 10ms after power-on.

Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20230725042207.22310-2-andre.werner@systec-electronic.com
[groeck: Cosmetic documentation fixup; added documentation to index;
 replaced probe_new with probe dropped unused variable]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: Remove smm665 driver 2023-08-21T13:04:29+00:00 Guenter Roeck linux@roeck-us.net 2023-07-16T15:39:41+00:00 b3af14c4c2841343584b61c49b0cfb8808764239 SMM665 and related chips are power controller/sequencer chips from Summit Microelectronics. The company was acquired by Qualcomm in 2012, and support for the chip series stopped. The chips are long since gone from active use, making the driver unsupportable and just consuming space and compile time. Remove it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
SMM665 and related chips are power controller/sequencer chips from
Summit Microelectronics. The company was acquired by Qualcomm in 2012,
and support for the chip series stopped.

The chips are long since gone from active use, making the driver
unsupportable and just consuming space and compile time. Remove it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: add HP WMI Sensors driver 2023-06-08T13:41:19+00:00 James Seo james@equiv.tech 2023-05-22T11:56:46+00:00 23902f98f8d4811ab84dde6419569a5b374f8122 Hewlett-Packard (and some HP Compaq) business-class computers report hardware monitoring information via WMI. This driver exposes that information to hwmon. Initial support is provided for temperature, fan speed, and intrusion sensor types. Provisional support is provided for voltage and current sensor types. HP's WMI implementation permits many other types of numeric sensors. Therefore, a debugfs interface is also provided to enumerate and inspect all numeric sensors visible on the WMI side. This should facilitate adding support for other sensor types in the future. Tested on a HP Z420, a HP EliteOne 800 G1, and a HP Compaq Elite 8300 SFF. Note that provisionally supported sensor types are untested and seem to be rare-to-nonexistent in the wild, having been encountered neither on test systems nor in ACPI dumps from the Linux Hardware Database. They are included because their popularity in general makes their presence on past or future HP systems plausible and because no doubt exists as to how the sensors themselves would be represented in WMI (alarm attributes will need to wait for hardware to be located). A 2005 HP whitepaper gives the relevant sensor object MOF definition and sensor value scaling calculation, and both this driver and the official HP Performance Advisor utility comply with them (confirmed in the latter case by reverse engineering). Link: https://h20331.www2.hp.com/hpsub/downloads/cmi_whitepaper.pdf Signed-off-by: James Seo <james@equiv.tech> Link: https://lore.kernel.org/r/20230522115645.509701-1-james@equiv.tech [groeck: Set error return value for intrusion writes to -EINVAL. Always accept writes of 0 even if there was no intrusion. ] Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Hewlett-Packard (and some HP Compaq) business-class computers report
hardware monitoring information via WMI. This driver exposes that
information to hwmon.

Initial support is provided for temperature, fan speed, and intrusion
sensor types. Provisional support is provided for voltage and current
sensor types.

HP's WMI implementation permits many other types of numeric sensors.
Therefore, a debugfs interface is also provided to enumerate and
inspect all numeric sensors visible on the WMI side. This should
facilitate adding support for other sensor types in the future.

Tested on a HP Z420, a HP EliteOne 800 G1, and a HP Compaq Elite 8300
SFF.

Note that provisionally supported sensor types are untested and seem
to be rare-to-nonexistent in the wild, having been encountered
neither on test systems nor in ACPI dumps from the Linux Hardware
Database. They are included because their popularity in general makes
their presence on past or future HP systems plausible and because no
doubt exists as to how the sensors themselves would be represented in
WMI (alarm attributes will need to wait for hardware to be located).
A 2005 HP whitepaper gives the relevant sensor object MOF definition
and sensor value scaling calculation, and both this driver and the
official HP Performance Advisor utility comply with them (confirmed
in the latter case by reverse engineering).

Link: https://h20331.www2.hp.com/hpsub/downloads/cmi_whitepaper.pdf
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230522115645.509701-1-james@equiv.tech
[groeck: Set error return value for intrusion writes to -EINVAL.
	 Always accept writes of 0 even if there was no intrusion. ]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: Add MAX31827 driver 2023-06-08T13:41:18+00:00 Daniel Matyas daniel.matyas@analog.com 2023-05-24T16:01:30+00:00 16d60ba8fdc4c6e4745005889dea6ed82b6b5cbd MAX31827 is a low-power temperature switch with I2C interface. The device is a ±1°C accuracy from -40°C to +125°C (12 bits) local temperature switch and sensor with I2C/SM- Bus interface. The combination of small 6-bump wafer-lev- el package (WLP) and high accuracy makes this temper- ature sensor/switch ideal for a wide range of applications. Signed-off-by: Daniel Matyas <daniel.matyas@analog.com> Link: https://lore.kernel.org/r/20230524160131.14081-2-daniel.matyas@analog.com [groeck: Improved define alignment, return -EINVAL after bad user input, fixed up compatible statement] Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
MAX31827 is a low-power temperature switch with I2C interface.

The device is a ±1°C accuracy from -40°C to +125°C
(12 bits) local temperature switch and sensor with I2C/SM-
Bus interface. The combination of small 6-bump wafer-lev-
el package (WLP) and high accuracy makes this temper-
ature sensor/switch ideal for a wide range of applications.

Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20230524160131.14081-2-daniel.matyas@analog.com
[groeck: Improved define alignment, return -EINVAL after bad user input,
 fixed up compatible statement]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (aht10) Add support for compatible aht20 2023-06-08T13:41:18+00:00 Kirill Yatsenko kiriyatsenko@gmail.com 2023-05-24T20:19:12+00:00 d2abcb5cc88577f996ab505c8102254aba7062d8 Add support for compatible AHT20 temperature/humidity sensor. The only difference between the two is that AHT20 has additional crc8 byte. It seems like AHT15 is also supported by the driver but it wasn't verified and tested yet. Tested on Beaglebone black rev C. Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com> Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Add support for compatible AHT20 temperature/humidity sensor. The only
difference between the two is that AHT20 has additional crc8 byte.

It seems like AHT15 is also supported by the driver but it wasn't
verified and tested yet.

Tested on Beaglebone black rev C.

Signed-off-by: Kirill Yatsenko <kiriyatsenko@gmail.com>
Link: https://lore.kernel.org/r/20230524201912.815993-1-kiriyatsenko@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (sfctemp) Add StarFive JH71x0 temperature sensor 2023-04-19T14:08:39+00:00 Emil Renner Berthing kernel@esmil.dk 2023-03-21T02:26:44+00:00 7f2958e845d2c8bf1100dc088dbdc31af2a80fd0 Add driver for the StarFive JH71x0 temperature sensor. You can enable/disable it and read temperature in milli Celcius through sysfs. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Co-developed-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20230321022644.107027-3-hal.feng@starfivetech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Add driver for the StarFive JH71x0 temperature sensor. You
can enable/disable it and read temperature in milli Celcius
through sysfs.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230321022644.107027-3-hal.feng@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: remove trailing whitespace in Kconfig 2023-04-19T14:08:39+00:00 James Seo james@equiv.tech 2023-04-05T07:31:05+00:00 38c92a3110106e1b75d6d3c237478a11fefb461f Remove an unneeded trailing space. Signed-off-by: James Seo <james@equiv.tech> Link: https://lore.kernel.org/r/20230405073056.53466-2-james@equiv.tech Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Remove an unneeded trailing space.

Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230405073056.53466-2-james@equiv.tech
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Merge tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd 2023-02-23T23:03:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-23T23:03:05+00:00 c2c23dc7d5f866a8bec3db638fae7f63789303ac Pull MFD updates from Lee Jones: "Core Framework: - Change MFD support status from Supported to Maintained New Drivers: - Add support for the Intel Platform Management Component Interface (PMCI) Removed Drivers: - HTC PASIC3 LED/DS1WM - Toshiba T7L66XB, TC6387XB and TC6393XB TMIO New Device Support: - Add support for N6000 Flash to Intel M10 BMC PMCI - Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC New Functionality: - Provide Reset support to Syscon Fix-ups: - Explicitly provide missing include files - Pass platform type data/info via the SPI/I2C/DT registration strategy - Lots of DT documentation / adaptions - Replace scnprintf() with preferred sysfs_emit() - Remove unused / superfluous code - Fix some trivial whitesspace / spelling / grammatical issues - Replace pm_power_off with new and improved register_sys_off_handler() API Bug Fixes: - Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth - Repair the order of AXPxxx IRQ PEK RISE/FALL definitions - Refuse to build CS5535 on unsupported UML architectures - Fix memory leaks in error return paths - Prevent refcount leaks in error return paths" * tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits) dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332 dt-bindings: mfd: Add NXP BBNSM mfd: ntxec: Add version number for EC in Tolino Vision dt-bindings: mfd: syscon: Add mt8365-syscfg mfd: Remove toshiba tmio drivers mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak mfd: syscon: Allow reset control for syscon devices dt-bindings: mfd/syscon: Add resets property dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226 mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration mfd: axp20x: Switch to the sys-off handler API mfd: core: Spelling s/compement/complement/ mfd: max8925: Remove the unused function irq_to_max8925() mfd: qcom-pm8xxx: Remove set but unused variable 'rev' dt-bindings: mfd: syscon: Document GXP register compatible mfd: twl4030-power: Drop empty platform remove function mfd: twl: Fix TWL6032 phy vbus detection mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read() MAINTAINERS: Move MFD from a Supported to Maintaied state ... 
Pull MFD updates from Lee Jones:
 "Core Framework:
   - Change MFD support status from Supported to Maintained

  New Drivers:
   - Add support for the Intel Platform Management Component Interface
     (PMCI)

  Removed Drivers:
   - HTC PASIC3 LED/DS1WM
   - Toshiba T7L66XB, TC6387XB and TC6393XB TMIO

  New Device Support:
   - Add support for N6000 Flash to Intel M10 BMC PMCI
   - Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC

  New Functionality:
   - Provide Reset support to Syscon

  Fix-ups:
   - Explicitly provide missing include files
   - Pass platform type data/info via the SPI/I2C/DT registration
     strategy
   - Lots of DT documentation / adaptions
   - Replace scnprintf() with preferred sysfs_emit()
   - Remove unused / superfluous code
   - Fix some trivial whitesspace / spelling / grammatical issues
   - Replace pm_power_off with new and improved
     register_sys_off_handler() API

  Bug Fixes:
   - Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
   - Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
   - Refuse to build CS5535 on unsupported UML architectures
   - Fix memory leaks in error return paths
   - Prevent refcount leaks in error return paths"

* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
  dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
  dt-bindings: mfd: Add NXP BBNSM
  mfd: ntxec: Add version number for EC in Tolino Vision
  dt-bindings: mfd: syscon: Add mt8365-syscfg
  mfd: Remove toshiba tmio drivers
  mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
  mfd: syscon: Allow reset control for syscon devices
  dt-bindings: mfd/syscon: Add resets property
  dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
  mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
  mfd: axp20x: Switch to the sys-off handler API
  mfd: core: Spelling s/compement/complement/
  mfd: max8925: Remove the unused function irq_to_max8925()
  mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
  dt-bindings: mfd: syscon: Document GXP register compatible
  mfd: twl4030-power: Drop empty platform remove function
  mfd: twl: Fix TWL6032 phy vbus detection
  mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
  MAINTAINERS: Move MFD from a Supported to Maintaied state
  ...
Merge tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging 2023-02-22T19:31:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-22T19:31:09+00:00 241ed6ab74f94eb3d64ee6b950cd8091b1213225 Pull hwmon updates from Guenter Roeck: "New drivers: - Infineon TDA38640 Voltage Regulator - NXP MC34VR500 PMIC - GXP fan controller - MPQ7932 Power Management IC New chip or board support added to existing drivers: - it87: IT87952E; also other cleanup/improvements - intel-m10-bmc-hwmon: N6000 - pmbus/max16601: MAX16600 - aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer Poweradjust 3, Aquacomputer Aquaero - nct6775: Support for B650/B660/X670 ASUS boards - oxp-sensors: AYANEO AIR and AIR Pro Other notable changes: - Various kernel documentation fixes - Various devicetree bindings fixes - Explicitly deprecated [devm_]hwmon_device_register_with_groups - ftsteutates: Support for fanX_fault and other cleanup - ltc2945: Support for setting shunt resistor and other cleanup/fixes - coretemp: Avoid RDMSR interrupts to isolated CPUs, and simplify platform device handling ... and various other minor cleanups and fixes" * tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (66 commits) hwmon: Deprecate [devm_]hwmon_device_register_with_groups hwmon: (mlxreg-fan) Return zero speed for broken fan hwmon: (gxp-fan-ctrl) use devm_platform_get_and_ioremap_resource() hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream Ultimate hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3 hwmon: (iio_hwmon) use dev_err_probe hwmon: intel-m10-bmc-hwmon: Add N6000 sensors Docs/hwmon/index: Add missing SPDX License Identifier hwmon: (it87) Updated documentation for recent updates to it87 hwmon: (it87) Add new chipset IT87952E hwmon: (it87) Allow multiple chip IDs for force_id hwmon: (it87) Add chip_id in some info message hwmon: (it87) List full chip model name hwmon: (it87) Disable configuration exit for certain chips hwmon: (it87) Allow disabling exiting of configuration mode Documentation: hwmon: correct spelling hwmon: (pmbus/max16601) Add support for MAX16600 hwmon: (ltc2945) Allow setting shunt resistor hwmon: (ltc2945) Handle error case in ltc2945_value_store hwmon: (ltc2945) Add devicetree match table ... 
Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Infineon TDA38640 Voltage Regulator

   - NXP MC34VR500 PMIC

   - GXP fan controller

   - MPQ7932 Power Management IC

  New chip or board support added to existing drivers:

   - it87: IT87952E; also other cleanup/improvements

   - intel-m10-bmc-hwmon: N6000

   - pmbus/max16601: MAX16600

   - aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer
     Poweradjust 3, Aquacomputer Aquaero

   - nct6775: Support for B650/B660/X670 ASUS boards

   - oxp-sensors: AYANEO AIR and AIR Pro

  Other notable changes:

   - Various kernel documentation fixes

   - Various devicetree bindings fixes

   - Explicitly deprecated [devm_]hwmon_device_register_with_groups

   - ftsteutates: Support for fanX_fault and other cleanup

   - ltc2945: Support for setting shunt resistor and other cleanup/fixes

   - coretemp: Avoid RDMSR interrupts to isolated CPUs, and simplify
     platform device handling

  ... and various other minor cleanups and fixes"

* tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (66 commits)
  hwmon: Deprecate [devm_]hwmon_device_register_with_groups
  hwmon: (mlxreg-fan) Return zero speed for broken fan
  hwmon: (gxp-fan-ctrl) use devm_platform_get_and_ioremap_resource()
  hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream Ultimate
  hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3
  hwmon: (iio_hwmon) use dev_err_probe
  hwmon: intel-m10-bmc-hwmon: Add N6000 sensors
  Docs/hwmon/index: Add missing SPDX License Identifier
  hwmon: (it87) Updated documentation for recent updates to it87
  hwmon: (it87) Add new chipset IT87952E
  hwmon: (it87) Allow multiple chip IDs for force_id
  hwmon: (it87) Add chip_id in some info message
  hwmon: (it87) List full chip model name
  hwmon: (it87) Disable configuration exit for certain chips
  hwmon: (it87) Allow disabling exiting of configuration mode
  Documentation: hwmon: correct spelling
  hwmon: (pmbus/max16601) Add support for MAX16600
  hwmon: (ltc2945) Allow setting shunt resistor
  hwmon: (ltc2945) Handle error case in ltc2945_value_store
  hwmon: (ltc2945) Add devicetree match table
  ...
hwmon: add initial NXP MC34VR500 PMIC monitoring support 2023-02-03T15:30:10+00:00 Mario Kicherer dev@kicherer.org 2023-01-18T12:30:19+00:00 07830d9ab34c0622f577a88286746aa17c144afd Add initial monitoring support for the MC34VR500 PMIC. In its current state, input voltage and temperature alarms are reported to hwmon. Datasheet: - https://www.nxp.com/docs/en/data-sheet/MC34VR500.pdf Signed-off-by: Mario Kicherer <dev@kicherer.org> Link: https://lore.kernel.org/r/20230118123019.3041303-4-dev@kicherer.org [groeck: Silence stray compiler warning, terminate struct of_device_id] Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Add initial monitoring support for the MC34VR500 PMIC. In its current
state, input voltage and temperature alarms are reported to hwmon.

Datasheet:
 - https://www.nxp.com/docs/en/data-sheet/MC34VR500.pdf

Signed-off-by: Mario Kicherer <dev@kicherer.org>
Link: https://lore.kernel.org/r/20230118123019.3041303-4-dev@kicherer.org
[groeck: Silence stray compiler warning, terminate struct of_device_id]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>