linux.git/drivers/hwmon, branch v6.6.16 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git hwmon: (hp-wmi-sensors) Fix failure to load on EliteDesk 800 G6 2024-02-05T20:14:28+00:00 James Seo james@equiv.tech 2023-11-23T05:49:19+00:00 f9902f92ce53ab89041d9e6308cc28b43dd3de81 [ Upstream commit c9ba592580947b81f33f514320aeef02ddc001fd ] The EliteDesk 800 G6 stores a raw WMI string within the ACPI object in its BIOS corresponding to one instance of HPBIOS_PlatformEvents.Name. This is evidently a valid way of representing a WMI data item as far as the Microsoft ACPI-WMI mapper is concerned, but is preventing the driver from loading. This seems quite rare, but add support for such strings. Treating this as a quirk pretty much means adding that support anyway. Also clean up an oversight in update_numeric_sensor_from_wobj() in which the result of hp_wmi_strdup() was being used without error checking. Reported-by: Lukasz Stelmach <l.stelmach@samsung.com> Closes: https://lore.kernel.org/linux-hwmon/7850a0bd-60e7-88f8-1d6c-0bb0e3234fdc@roeck-us.net/ Tested-by: Lukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: James Seo <james@equiv.tech> Link: https://lore.kernel.org/r/20231123054918.157098-1-james@equiv.tech Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c9ba592580947b81f33f514320aeef02ddc001fd ]

The EliteDesk 800 G6 stores a raw WMI string within the ACPI object in its
BIOS corresponding to one instance of HPBIOS_PlatformEvents.Name. This is
evidently a valid way of representing a WMI data item as far as the
Microsoft ACPI-WMI mapper is concerned, but is preventing the driver from
loading.

This seems quite rare, but add support for such strings. Treating this as a
quirk pretty much means adding that support anyway.

Also clean up an oversight in update_numeric_sensor_from_wobj() in which
the result of hp_wmi_strdup() was being used without error checking.

Reported-by: Lukasz Stelmach <l.stelmach@samsung.com>
Closes: https://lore.kernel.org/linux-hwmon/7850a0bd-60e7-88f8-1d6c-0bb0e3234fdc@roeck-us.net/
Tested-by: Lukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20231123054918.157098-1-james@equiv.tech
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwmon: (nct6775) Fix fan speed set failure in automatic mode 2024-02-05T20:14:28+00:00 Xing Tong Wu xingtong.wu@siemens.com 2023-11-21T08:16:04+00:00 6f86bbf92cc5ebb304b1f8be43279354c4285daf [ Upstream commit 8b3800256abad20e91c2698607f9b28591407b19 ] Setting the fan speed is only valid in manual mode; it is not possible to set the fan's speed in automatic mode. Return error when attempting to set the fan speed in automatic mode. Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com> Link: https://lore.kernel.org/r/20231121081604.2499-3-xingtong_wu@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8b3800256abad20e91c2698607f9b28591407b19 ]

Setting the fan speed is only valid in manual mode; it is not possible
to set the fan's speed in automatic mode.
Return error when attempting to set the fan speed in automatic mode.

Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
Link: https://lore.kernel.org/r/20231121081604.2499-3-xingtong_wu@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwmon: (corsair-psu) Fix probe when built-in 2024-01-20T10:51:42+00:00 Armin Wolf W_Armin@gmx.de 2023-12-07T21:07:23+00:00 3584858bfd34706b3dc60f2b83ef135ead1ffefa [ Upstream commit 307004e8b254ad28e150b63f299ab9caa4bc7c3e ] It seems that when the driver is built-in, the HID bus is initialized after the driver is loaded, which whould cause module_hid_driver() to fail. Fix this by registering the driver after the HID bus using late_initcall() in accordance with other hwmon HID drivers. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de [groeck: Dropped "compile tested" comment; the patch has been tested but the tester did not provide a Tested-by: tag] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 307004e8b254ad28e150b63f299ab9caa4bc7c3e ]

It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de
[groeck: Dropped "compile tested" comment; the patch has been tested
 but the tester did not provide a Tested-by: tag]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe() 2023-12-13T17:45:15+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2023-12-03T15:24:05+00:00 7cd68b364f833fdf1438e5d2c591bd650bb89bdc [ Upstream commit 35fe2ad259a3bfca15ab78c8ffb5278cb6149c89 ] There is no point in calling hid_hw_stop() if hid_hw_start() has failed. There is no point in calling hid_hw_close() if hid_hw_open() has failed. Update the error handling path accordingly. Fixes: 82e3430dfa8c ("hwmon: add driver for NZXT Kraken X42/X52/X62/X72") Reported-by: Aleksa Savic <savicaleksa83@gmail.com> Closes: https://lore.kernel.org/all/121470f0-6c1f-418a-844c-7ec2e8a54b8e@gmail.com/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jonas Malaco <jonas@protocubo.io> Link: https://lore.kernel.org/r/a768e69851a07a1f4e29f270f4e2559063f07343.1701617030.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 35fe2ad259a3bfca15ab78c8ffb5278cb6149c89 ]

There is no point in calling hid_hw_stop() if hid_hw_start() has failed.
There is no point in calling hid_hw_close() if hid_hw_open() has failed.

Update the error handling path accordingly.

Fixes: 82e3430dfa8c ("hwmon: add driver for NZXT Kraken X42/X52/X62/X72")
Reported-by: Aleksa Savic <savicaleksa83@gmail.com>
Closes: https://lore.kernel.org/all/121470f0-6c1f-418a-844c-7ec2e8a54b8e@gmail.com/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/a768e69851a07a1f4e29f270f4e2559063f07343.1701617030.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwmon: (acpi_power_meter) Fix 4.29 MW bug 2023-12-13T17:45:14+00:00 Armin Wolf W_Armin@gmx.de 2023-11-24T18:27:47+00:00 8ebf05908f0e8ab5d2c50555ed059fa239b31072 [ Upstream commit 1fefca6c57fb928d2131ff365270cbf863d89c88 ] The ACPI specification says: "If an error occurs while obtaining the meter reading or if the value is not available then an Integer with all bits set is returned" Since the "integer" is 32 bits in case of the ACPI power meter, userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW) in case of such an error. This was discovered due to a lm_sensors bugreport (https://github.com/lm-sensors/lm-sensors/issues/460). Fix this by returning -ENODATA instead. Tested-by: <urbinek@gmail.com> Fixes: de584afa5e18 ("hwmon driver for ACPI 4.0 power meters") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1fefca6c57fb928d2131ff365270cbf863d89c88 ]

The ACPI specification says:

"If an error occurs while obtaining the meter reading or if the value
is not available then an Integer with all bits set is returned"

Since the "integer" is 32 bits in case of the ACPI power meter,
userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW)
in case of such an error. This was discovered due to a lm_sensors
bugreport (https://github.com/lm-sensors/lm-sensors/issues/460).
Fix this by returning -ENODATA instead.

Tested-by: <urbinek@gmail.com>
Fixes: de584afa5e18 ("hwmon driver for ACPI 4.0 power meters")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwmon: (sch5627) Disallow write access if virtual registers are locked 2023-11-20T10:59:08+00:00 Armin Wolf W_Armin@gmx.de 2023-09-07T05:26:36+00:00 aeb30fa670d4193b72f1f71c458a28471dde41c5 [ Upstream commit 7da8a635436029957c5350da3acf51d78ed64071 ] When the lock bit inside SCH5627_REG_CTRL is set, then the virtual registers become read-only until the next power cycle. Disallow write access to those registers in such a case. Tested on a Fujitsu Esprimo P720. Fixes: aa9f833dfc12 ("hwmon: (sch5627) Add pwmX_auto_channels_temp support") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230907052639.16491-3-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7da8a635436029957c5350da3acf51d78ed64071 ]

When the lock bit inside SCH5627_REG_CTRL is set, then the virtual
registers become read-only until the next power cycle.
Disallow write access to those registers in such a case.

Tested on a Fujitsu Esprimo P720.

Fixes: aa9f833dfc12 ("hwmon: (sch5627) Add pwmX_auto_channels_temp support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwmon: (sch5627) Use bit macros when accessing the control register 2023-11-20T10:59:08+00:00 Armin Wolf W_Armin@gmx.de 2023-09-07T05:26:35+00:00 11842b094a6402cb7e93010d3805de9bf25beede [ Upstream commit 7f0b28e0653f36b51542d25dd54ed312c397ecfc ] Use bit macros then accessing SCH5627_REG_CTRL, so that people do not need to look at the datasheet to find out what each bit does. Tested on a Fujitsu Esprimo P720. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230907052639.16491-2-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Stable-dep-of: 7da8a6354360 ("hwmon: (sch5627) Disallow write access if virtual registers are locked") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7f0b28e0653f36b51542d25dd54ed312c397ecfc ]

Use bit macros then accessing SCH5627_REG_CTRL, so that people
do not need to look at the datasheet to find out what each bit
does.

Tested on a Fujitsu Esprimo P720.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 7da8a6354360 ("hwmon: (sch5627) Disallow write access if virtual registers are locked")
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwmon: (pmbus/mp2975) Move PGOOD fix 2023-11-20T10:59:08+00:00 Naresh Solanki naresh.solanki@9elements.com 2023-10-27T10:33:52+00:00 9bc1ab0eb883d1d84bb7bac7a49a1522b48218e5 [ Upstream commit 9da2901c47332b030ea4d2a2302bc7c0b83fc67c ] The PGOOD fix was intended for MP2973 & MP2971 & not for MP2975. Fixes: acda945afb46 ("hwmon: (pmbus/mp2975) Fix PGOOD in READ_STATUS_WORD") Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Link: https://lore.kernel.org/r/20231027103352.918895-1-naresh.solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9da2901c47332b030ea4d2a2302bc7c0b83fc67c ]

The PGOOD fix was intended for MP2973 & MP2971 & not for MP2975.

Fixes: acda945afb46 ("hwmon: (pmbus/mp2975) Fix PGOOD in READ_STATUS_WORD")
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20231027103352.918895-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert "hwmon: (sch56xx-common) Add automatic module loading on supported devices" 2023-11-20T10:59:07+00:00 Guenter Roeck linux@roeck-us.net 2023-10-25T21:32:40+00:00 a32a93ec7e3dcb7c6fea0c68ded5dadd8b783c12 [ Upstream commit d621a46d05107f4e510383d6a38f2160c62d28f7 ] This reverts commit 393935baa45e5ccb9603cf7f9f020ed1bc0915f7. As reported by Ian Nartowicz, this and the next patch result in a failure to load the driver on Celsius W280. While the alternative would be to add the board to the DMI override table, it is quite likely that other systems are also affected. Revert the offending patches to avoid future problems. Fixes: 393935baa45e ("hwmon: (sch56xx-common) Add automatic module loading on supported devices") Reported-by: Ian Nartowicz <deadbeef@nartowicz.co.uk> Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@debian.org/T/#t Cc: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d621a46d05107f4e510383d6a38f2160c62d28f7 ]

This reverts commit 393935baa45e5ccb9603cf7f9f020ed1bc0915f7.

As reported by Ian Nartowicz, this and the next patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.

Fixes: 393935baa45e ("hwmon: (sch56xx-common) Add automatic module loading on supported devices")
Reported-by: Ian Nartowicz <deadbeef@nartowicz.co.uk>
Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@debian.org/T/#t
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert "hwmon: (sch56xx-common) Add DMI override table" 2023-11-20T10:59:07+00:00 Guenter Roeck linux@roeck-us.net 2023-10-25T21:28:49+00:00 fe7d29176ad66d318974b05ebb039fe0ea10dae0 [ Upstream commit 28da9dee3594423534f3ea1e1f61e6bb2d2fa651 ] This reverts commit fd2d53c367ae9983c2100ac733a834e0c79d7537. As reported by Ian Nartowicz, this and the preceding patch result in a failure to load the driver on Celsius W280. While the alternative would be to add the board to the DMI override table, it is quite likely that other systems are also affected. Revert the offending patches to avoid future problems. Fixes: fd2d53c367ae ("hwmon: (sch56xx-common) Add DMI override table") Reported-by: Ian Nartowicz <deadbeef@nartowicz.co.uk> Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@debian.org/T/#t Cc: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 28da9dee3594423534f3ea1e1f61e6bb2d2fa651 ]

This reverts commit fd2d53c367ae9983c2100ac733a834e0c79d7537.

As reported by Ian Nartowicz, this and the preceding patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.

Fixes: fd2d53c367ae ("hwmon: (sch56xx-common) Add DMI override table")
Reported-by: Ian Nartowicz <deadbeef@nartowicz.co.uk>
Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@debian.org/T/#t
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>