linux.git/drivers/iio/dac, branch v4.9.209

iio: dac: mcp4922: fix error handling in mcp4922_write_raw

2019-11-25T08:51:59+00:00

[ Upstream commit 0833627fc3f757a0dca11e2a9c46c96335a900ee ]

Do not try to write negative values and make sure that the write goes well.

Signed-off-by: Marcus Folkesson 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: ad5064: Fix regulator handling

2018-11-13T19:16:57+00:00

commit 8911a43bc198877fad9f4b0246a866b26bb547ab upstream.

The correct way to handle errors returned by regualtor_get() and friends is
to propagate the error since that means that an regulator was specified,
but something went wrong when requesting it.

For handling optional regulators, e.g. when the device has an internal
vref, regulator_get_optional() should be used to avoid getting the dummy
regulator that the regulator core otherwise provides.

Signed-off-by: Lars-Peter Clausen 
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: dac: ad7303: fix channel description

2017-05-25T13:44:37+00:00

commit ce420fd4251809b4c3119b3b20c8b13bd8eba150 upstream.

realbits, storagebits and shift should be numbers, not ASCII characters.

Signed-off-by: Pavel Roskin 
Reviewed-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: stx104: Add IIO support for the ADC channels

2016-09-03T16:25:53+00:00

The Apex Embedded Systems STX104 features 16 channels of single-ended (8
channels of true differential) 16-bit analog input. Differential input
configuration may be selected via a physical jumper on the device.
Similarly, input polarity (unipolar/bipolar) is configured via a
physical jumper on the device.

Input gain selection is available to the user via software, thus
allowing eight possible input ranges: +-10V, +-5V, +-2.5V, +-1.25V,
0 to 10V, 0 to 5V, 0 to 2.5V, and 0 to 1.25V. Four input gain
configurations are supported: x1, x2, x4, and x8.

This ADC resolution is 16-bits (1/65536 of full scale). Analog input
samples are taken on software trigger; neither FIFO sampling nor
interrupt triggering is supported by this driver.

The Apex Embedded Systems STX104 is primarily an analog-to-digital
converter device. The STX104 IIO driver was initially placed in the DAC
directory because only the DAC portion of the STX104 was supported at
the time. Now that ADC support has been added to the STX104 IIO driver,
the driver should be moved to the more appropriate ADC directory.

Signed-off-by: William Breathitt Gray 
Signed-off-by: Jonathan Cameron

iio: dac: AD8801: add Analog Devices AD8801/AD8803 support

2016-08-29T17:20:01+00:00

Add support for Analog Devices AD8801/AD8803, 8 channels 8bits, Digital to
Analog converters.

Signed-off-by: Gwenhael Goavec-Merou 
Signed-off-by: Jonathan Cameron

iio: ad5755: fix off-by-one on devnr limit check

2016-08-29T15:15:24+00:00

The comparison for devnr limits is off-by-one, the current check
allows 0 to AD5755_NUM_CHANNELS and the limit should be in fact
0 to AD5755_NUM_CHANNELS - 1.  This can lead to an out of bounds
write to pdata->dac[devnr]. Fix this by replacing > with >= on the
comparison.

Signed-off-by: Colin Ian King 
Fixes: c947459979c6 ("iio: ad5755: add support for dt bindings")
Signed-off-by: Jonathan Cameron

iio: Add IIO support for the Measurement Computing CIO-DAC family

2016-07-24T18:58:43+00:00

The Measurement Computing CIO-DAC is a family of 16-bit and 12-bit
analog output devices. The analog outputs are from AD660BN/AD7237
converters with each output buffered by an OP-27. Voltage ranges are
configured via physical jumpers on the device.

This driver does not support the devices' simulataneous update mode; the
XFER jumper option should be deselected for all analog output channels.

This driver provides IIO support for the Measurement Computing CIO-DAC
family: CIO-DAC16, CIO-DAC08, and PC104-DAC06. The base port addresses
for the devices may be configured via the base array module parameter.

Signed-off-by: William Breathitt Gray 
Signed-off-by: Jonathan Cameron

iio:core: timestamping clock selection support

2016-06-30T18:41:38+00:00

Adds a new per-device sysfs attribute "current_timestamp_clock" to allow
userspace to select a particular POSIX clock for buffered samples and
events timestamping.

Following clocks, as listed in clock_gettime(2), are supported:
CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW,
CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and
CLOCK_TAI.

Signed-off-by: Gregor Boirie 
Acked-by: Sanchayan Maity 
Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2016-06-29T22:35:01+00:00

Jonathan writes:

Second round of new iio device support, features and cleanups in the 4.8 cycle

Firstly some contact detail updates:
* NXP took over freescale. Update the mma8452 header to reflect this.
* Martin Kepplinger email address change in mma8452 header.
* Adriana Reus has changed email address. Update .mailmap.
* Matt Ranostay has changed email address. Update .mailmap.

New Device Support
* max1363
  - add the missing i2c_device_ids for a couple of parts so they can actually
    be used.
* ms5867
  - add device ids for ms5805 and ms5837 parts.

New Features
* ad5755
  - DT support.  This one was a bit controversial and under review for a long
    time.  Still no one could come up with a better solution.
* stx104
  - add gpio support
* ti-adc081c
  - Add ACPI device ID matching.

Core changes
* Refuse to register triggers with duplicate names.  There is no way to
  distinguish between them so this makes no sense.  A few drivers do not
  generate unique names for each instance of the device present.  We can't
  fix this without changing ABI so leave them and wait for someone to
  actually take the rare step of two identical accelerometers on the same
  board.
* buffer-dma
  - use ARRAY_SIZE in a few appropriate locations.

Tools
* Fix the fact that the --trigger-num option in generic_buffer didn't allow
  0 which is perfectly valid in the ABI.

Cleanups
* as3935
  - improve error reporting.
  - remove redundant zeroing of a field in iio_priv.
* gp2ap020a00f
  - use the iio_device_claim_*_mode helpers rather than open coding locking
  around mode changes.
* isl29125
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* lidar
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* mma8452
  - more detail in devices supported description in comments (addresses and
  similar)
* sca3000
  - add a missing error check.
* tcs3414
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* tcs3472
  - use the iio_device_claim_*_mode helpers rather than open coding locking.

iio: ad5755: add support for dt bindings

2016-06-27T20:09:00+00:00

Devicetree can provide platform data

Signed-off-by: Sean Nyekjaer 
Signed-off-by: Jonathan Cameron