linux.git/drivers/iio/pressure, branch v5.4.164

iio:pressure:mpl3115: Force alignment of buffer

2020-12-30T10:51:44+00:00

commit 198cf32f0503d2ad60d320b95ef6fb8243db857f upstream.

Whilst this is another case of the issue Lars reported with
an array of elements of smaller than 8 bytes being passed
to iio_push_to_buffers_with_timestamp(), the solution here is
a bit different from the other cases and relies on __aligned
working on the stack (true since 4.6?)

This one is unusual.  We have to do an explicit memset() each time
as we are reading 3 bytes into a potential 4 byte channel which
may sometimes be a 2 byte channel depending on what is enabled.
As such, moving the buffer to the heap in the iio_priv structure
doesn't save us much.  We can't use a nice explicit structure
on the stack either as the data channels have different storage
sizes and are all separately controlled.

Fixes: cc26ad455f57 ("iio: Add Freescale MPL3115A2 pressure / temperature sensor driver")
Reported-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Reviewed-by: Andy Shevchenko 
Reviewed-by: Alexandru Ardelean 
Cc: Peter Meerwald 
Cc: 
Link: https://lore.kernel.org/r/20200920112742.170751-7-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman

iio:pressure:ms5611 Fix buffer element alignment

2020-07-22T07:32:54+00:00

commit 8db4afe163bbdd93dca6fcefbb831ef12ecc6b4d upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
Here there is no data leak possibility so use an explicit structure
on the stack to ensure alignment and nice readable fashion.

The forced alignment of ts isn't strictly necessary in this driver
as the padding will be correct anyway (there isn't any).  However
it is probably less fragile to have it there and it acts as
documentation of the requirement.

Fixes: 713bbb4efb9dc ("iio: pressure: ms5611: Add triggered buffer support")
Reported-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Acked-by: Tomasz Duszynski 
Cc: 
Signed-off-by: Greg Kroah-Hartman

iio: pressure: zpa2326: handle pm_runtime_get_sync failure

2020-07-22T07:32:54+00:00

commit d88de040e1df38414fc1e4380be9d0e997ab4d58 upstream.

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count. Call pm_runtime_put if
pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost 
Fixes: 03b262f2bbf4 ("iio:pressure: initial zpa2326 barometer support")
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: bmp280: fix compensation of humidity

2020-06-24T15:50:12+00:00

[ Upstream commit dee2dabc0e4115b80945fe2c91603e634f4b4686 ]

Limit the output of humidity compensation to the range between 0 and 100
percent.

Depending on the calibration parameters of the individual sensor it
happens, that a humidity above 100 percent or below 0 percent is
calculated, which don't make sense in terms of relative humidity.

Add a clamp to the compensation formula as described in the datasheet of
the sensor in chapter 4.2.3.

Although this clamp is documented, it was never in the driver of the
kernel.

It depends on the circumstances (calibration parameters, temperature,
humidity) if one can see a value above 100 percent without the clamp.
The writer of this patch was working with this type of sensor without
noting this error. So it seems to be a rare event when this bug occures.

Signed-off-by: Andreas Klinger 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: pressure: bmp280: Tolerate IRQ before registering

2020-06-24T15:50:08+00:00

[ Upstream commit 97b31a6f5fb95b1ec6575b78a7240baddba34384 ]

With DEBUG_SHIRQ enabled we have a kernel crash

[  116.482696] BUG: kernel NULL pointer dereference, address: 0000000000000000

...

[  116.606571] Call Trace:
[  116.609023]  
[  116.611047]  complete+0x34/0x50
[  116.614206]  bmp085_eoc_irq+0x9/0x10 [bmp280]

because DEBUG_SHIRQ mechanism fires an IRQ before registration and drivers
ought to be able to handle an interrupt happening before request_irq() returns.

Fixes: aae953949651 ("iio: pressure: bmp280: add support for BMP085 EOC interrupt")
Signed-off-by: Andy Shevchenko 
Acked-by: Linus Walleij 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: cros_ec_baro: set info_mask_shared_by_all_available field

2019-12-31T15:45:15+00:00

[ Upstream commit e9a4cbcaaa391ef44d623d548ee715e77265030c ]

Field was already set for light/proximity and
accelerometer/gyroscope/magnetometer sensors.

Fixes: ae7b02ad2f32 ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs")
Signed-off-by: Gwendal Grignou 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

Merge tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

2019-09-19T21:14:28+00:00

Pull chrome platform updates from Benson Leung:
 "CrOS EC / MFD Migration:
    - Move cros_ec core driver from mfd into chrome platform.

  Wilco EC:
    - Add batt_ppid_info command to Wilco telemetry driver.

  CrOS EC:
    - cros_ec_rpmsg : Add support to inform EC of suspend/resume status
    - cros_ec_rpmsg : Fix race condition on probe failed
    - cros_ec_chardev : Add a poll handler to receive MKBP events

  Misc:
    - bugfixes in cros_usbpd_logger and cros_ec_ishtp"

* tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue
  platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events
  platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed
  platform/chrome: chromeos_tbmc: Report wake events
  mfd: cros_ec: Use mfd_add_hotplug_devices() helper
  mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices
  mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs
  mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper
  mfd / platform: cros_ec: Reorganize platform and mfd includes
  mfd / platform: cros_ec: Rename config to a better name
  mfd: cros_ec: Switch to use the new cros-ec-chardev driver
  mfd / platform: cros_ec: Miscellaneous character device to talk with the EC
  mfd / platform: cros_ec: Move cros-ec core driver out from MFD
  mfd / platform: cros_ec: Handle chained ECs as platform devices
  platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support
  platform/chrome: chromeos_laptop: drop checks of NULL-safe functions
  platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver

mfd / platform: cros_ec: Reorganize platform and mfd includes

2019-09-02T10:33:42+00:00

There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.

In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:

 - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
 - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
   driver from include/linux/mfd/cros_ec.h to a new file
   include/linux/platform_data/cros_ec_proto.h
 - Update all the drivers with the new includes, so
   - Drivers that only need to know about the protocol include
     - linux/platform_data/cros_ec_proto.h
     - linux/platform_data/cros_ec_commands.h
   - Drivers that need to know about the cros-ec mfd device also include
     - linux/mfd/cros_ec.h

Signed-off-by: Enric Balletbo i Serra 
Acked-by: Andy Shevchenko 
Acked-by: Mark Brown 
Acked-by: Wolfram Sang 
Acked-by: Neil Armstrong 
Acked-by: Alexandre Belloni 
Acked-by: Jonathan Cameron 
Acked-by: Benjamin Tissoires 
Acked-by: Dmitry Torokhov 
Acked-by: Sebastian Reichel 
Acked-by: Chanwoo Choi 
Reviewed-by: Gwendal Grignou 
Tested-by: Gwendal Grignou 
Series changes: 3
- Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp)
Signed-off-by: Lee Jones

iio:st_sensors: remove buffer allocation at each buffer enable

2019-08-11T08:26:04+00:00

This patch is removing the buffer allocation at each buffer enable.
We just allocate enough memory in the main structure during probe
to cover maximum size needed (that anyway is pretty small) [16bytes].

Signed-off-by: Denis Ciocca 
Signed-off-by: Jonathan Cameron

iio: remove get_irq_data_ready() function pointer and use IRQ number directly

2019-08-05T15:50:08+00:00

Not even sure why it was there since the beginning. Just use IRQ
number in the sensor_data struct.

Signed-off-by: Denis Ciocca 
Signed-off-by: Jonathan Cameron