linux.git/drivers/iio, branch v4.19.205 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git iio: adc: Fix incorrect exit of for-loop 2021-08-26T12:36:35+00:00 Colin Ian King colin.king@canonical.com 2021-07-30T07:16:51+00:00 2870da9189ddcdb1fa27c23556d8349f1d39d327 commit 5afc1540f13804a31bb704b763308e17688369c5 upstream. Currently the for-loop that scans for the optimial adc_period iterates through all the possible adc_period levels because the exit logic in the loop is inverted. I believe the comparison should be swapped and the continue replaced with a break to exit the loop at the correct point. Addresses-Coverity: ("Continue has no effect") Fixes: e08e19c331fb ("iio:adc: add iio driver for Palmas (twl6035/7) gpadc") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210730071651.17394-1-colin.king@canonical.com Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5afc1540f13804a31bb704b763308e17688369c5 upstream.

Currently the for-loop that scans for the optimial adc_period iterates
through all the possible adc_period levels because the exit logic in
the loop is inverted. I believe the comparison should be swapped and
the continue replaced with a break to exit the loop at the correct
point.

Addresses-Coverity: ("Continue has no effect")
Fixes: e08e19c331fb ("iio:adc: add iio driver for Palmas (twl6035/7) gpadc")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210730071651.17394-1-colin.king@canonical.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: humidity: hdc100x: Add margin to the conversion time 2021-08-26T12:36:35+00:00 Chris Lesiak chris.lesiak@licor.com 2021-06-14T14:18:20+00:00 13ca1daf27fd7d314114022e78ce2b7f87b84f24 commit 84edec86f449adea9ee0b4912a79ab8d9d65abb7 upstream. The datasheets have the following note for the conversion time specification: "This parameter is specified by design and/or characterization and it is not tested in production." Parts have been seen that require more time to do 14-bit conversions for the relative humidity channel. The result is ENXIO due to the address phase of a transfer not getting an ACK. Delay an additional 1 ms per conversion to allow for additional margin. Fixes: 4839367d99e3 ("iio: humidity: add HDC100x support") Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210614141820.2034827-1-chris.lesiak@licor.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 84edec86f449adea9ee0b4912a79ab8d9d65abb7 upstream.

The datasheets have the following note for the conversion time
specification: "This parameter is specified by design and/or
characterization and it is not tested in production."

Parts have been seen that require more time to do 14-bit conversions for
the relative humidity channel.  The result is ENXIO due to the address
phase of a transfer not getting an ACK.

Delay an additional 1 ms per conversion to allow for additional margin.

Fixes: 4839367d99e3 ("iio: humidity: add HDC100x support")
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210614141820.2034827-1-chris.lesiak@licor.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: dac: ds4422/ds4424 drop of_node check 2021-07-31T06:22:37+00:00 Ruslan Babayev ruslan@babayev.com 2019-05-05T19:24:36+00:00 0365fcac3aa14b54d535a9dbf073eebaaa8e0287 commit a2d2010d95cd7ffe3773aba6eaee35d54e332c25 upstream. The driver doesn't actually rely on any DT properties. Removing this check makes it usable on ACPI based platforms. Signed-off-by: Ruslan Babayev <ruslan@babayev.com> Cc: xe-linux-external@cisco.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a2d2010d95cd7ffe3773aba6eaee35d54e332c25 upstream.

The driver doesn't actually rely on any DT properties. Removing this
check makes it usable on ACPI based platforms.

Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Cc: xe-linux-external@cisco.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: accel: bma180: Fix BMA25x bandwidth register values 2021-07-28T09:13:51+00:00 Stephan Gerhold stephan@gerhold.net 2021-05-26T09:44:07+00:00 e276295031c553b6d063de8667dcb6a3b0ef781c commit 8090d67421ddab0ae932abab5a60200598bf0bbb upstream According to the BMA253 datasheet [1] and BMA250 datasheet [2] the bandwidth value for BMA25x should be set as 01xxx: "Settings 00xxx result in a bandwidth of 7.81 Hz; [...] It is recommended [...] to use the range from ´01000b´ to ´01111b´ only in order to be compatible with future products." However, at the moment the drivers sets bandwidth values from 0 to 6, which is not recommended and always results into 7.81 Hz bandwidth according to the datasheet. Fix this by introducing a bw_offset = 8 = 01000b for BMA25x, so the additional bit is always set for BMA25x. [1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf [2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf Cc: Peter Meerwald <pmeerw@pmeerw.net> Fixes: 2017cff24cc0 ("iio:bma180: Add BMA250 chip support") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210526094408.34298-2-stephan@gerhold.net Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8090d67421ddab0ae932abab5a60200598bf0bbb upstream

According to the BMA253 datasheet [1] and BMA250 datasheet [2] the
bandwidth value for BMA25x should be set as 01xxx:

  "Settings 00xxx result in a bandwidth of 7.81 Hz; [...]
   It is recommended [...] to use the range from ´01000b´ to ´01111b´
   only in order to be compatible with future products."

However, at the moment the drivers sets bandwidth values from 0 to 6,
which is not recommended and always results into 7.81 Hz bandwidth
according to the datasheet.

Fix this by introducing a bw_offset = 8 = 01000b for BMA25x,
so the additional bit is always set for BMA25x.

[1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf
[2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Fixes: 2017cff24cc0 ("iio:bma180: Add BMA250 chip support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526094408.34298-2-stephan@gerhold.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: accel: bma180: Use explicit member assignment 2021-07-28T09:13:51+00:00 Linus Walleij linus.walleij@linaro.org 2019-12-11T21:38:18+00:00 c1fd285f090c01811b05d18908da81e507bbd21c commit 9436abc40139503a7cea22a96437697d048f31c0 upstream This uses the C99 explicit .member assignment for the variant data in struct bma180_part_info. This makes it easier to understand and add new variants. Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9436abc40139503a7cea22a96437697d048f31c0 upstream

This uses the C99 explicit .member assignment for the
variant data in struct bma180_part_info. This makes it
easier to understand and add new variants.

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: prox: isl29501: Fix buffer alignment in iio_push_to_buffers_with_timestamp() 2021-07-20T14:15:56+00:00 Jonathan Cameron Jonathan.Cameron@huawei.com 2021-06-13T15:23:01+00:00 7cd3fd394f6581e992c5879bd4bddc18a3d543fb [ Upstream commit 92babc9938ebbf4050f2fba774836f7edc16a570 ] Add __aligned(8) to ensure the buffer passed to iio_push_to_buffers_with_timestamp() is suitable for the naturally aligned timestamp that will be inserted. Here an explicit structure is not used, because the holes would necessitate the addition of an explict memset(), to avoid a kernel data leak, making for a less minimal fix. Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Mathieu Othacehe <m.othacehe@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210613152301.571002-9-jic23@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 92babc9938ebbf4050f2fba774836f7edc16a570 ]

Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.

Here an explicit structure is not used, because the holes would
necessitate the addition of an explict memset(), to avoid a kernel
data leak, making for a less minimal fix.

Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Mathieu Othacehe <m.othacehe@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-9-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp() 2021-07-20T14:15:56+00:00 Jonathan Cameron Jonathan.Cameron@huawei.com 2021-06-13T15:22:57+00:00 91664385e6c49f1e961e822f2d024776ac22102a [ Upstream commit 61fa5dfa5f52806f5ce37a0ba5712c271eb22f98 ] Add __aligned(8) to ensure the buffer passed to iio_push_to_buffers_with_timestamp() is suitable for the naturally aligned timestamp that will be inserted. Fixes: f214ff521fb1 ("iio: ti-ads8688: Update buffer allocation for timestamps") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210613152301.571002-5-jic23@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 61fa5dfa5f52806f5ce37a0ba5712c271eb22f98 ]

Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.

Fixes: f214ff521fb1 ("iio: ti-ads8688: Update buffer allocation for timestamps")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-5-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
iio: adc: mxs-lradc: Fix buffer alignment in iio_push_to_buffers_with_timestamp() 2021-07-20T14:15:56+00:00 Jonathan Cameron Jonathan.Cameron@huawei.com 2021-06-13T15:22:56+00:00 3e8164ccaebee06b6df3c7ad776bb69edd60ec4d [ Upstream commit 6a6be221b8bd561b053f0701ec752a5ed9007f69 ] To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Add a comment on why the buffer is the size it is as not immediately obvious. Found during an audit of all calls of this function. Fixes: 6dd112b9f85e ("iio: adc: mxs-lradc: Add support for ADC driver") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andreas Klinger <ak@it-klinger.de> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210613152301.571002-4-jic23@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6a6be221b8bd561b053f0701ec752a5ed9007f69 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Add a comment on why the buffer is the size it is as not immediately
obvious.

Found during an audit of all calls of this function.

Fixes: 6dd112b9f85e ("iio: adc: mxs-lradc: Add support for ADC driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-4-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
iio: adc: hx711: Fix buffer alignment in iio_push_to_buffers_with_timestamp() 2021-07-20T14:15:56+00:00 Jonathan Cameron Jonathan.Cameron@huawei.com 2021-06-13T15:22:55+00:00 3ce7cd150ef7821508c142f4755fe4c327f79df2 [ Upstream commit afe2a789fbf7acd1a05407fc7839cc08d23825e3 ] To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: d3bf60450d47 ("iio: hx711: add triggered buffer support") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andreas Klinger <ak@it-klinger.de> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210613152301.571002-3-jic23@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit afe2a789fbf7acd1a05407fc7839cc08d23825e3 ]

To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.

Found during an audit of all calls of this function.

Fixes: d3bf60450d47 ("iio: hx711: add triggered buffer support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-3-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
iio: potentiostat: lmp91000: Fix alignment of buffer in iio_push_to_buffers_with_timestamp() 2021-07-20T14:15:54+00:00 Jonathan Cameron Jonathan.Cameron@huawei.com 2021-05-01T17:13:48+00:00 51ef21934d1cc8e8af434a3d8429baeb41a4a91f [ Upstream commit 8979b67ec61abc232636400ee8c758a16a73c95f ] Add __aligned(8) to ensure the buffer passed to iio_push_to_buffers_with_timestamp() is suitable for the naturally aligned timestamp that will be inserted. Here structure is not used, because this buffer is also used elsewhere in the driver. Fixes: 67e17300dc1d ("iio: potentiostat: add LMP91000 support") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210501171352.512953-8-jic23@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8979b67ec61abc232636400ee8c758a16a73c95f ]

Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.

Here structure is not used, because this buffer is also used
elsewhere in the driver.

Fixes: 67e17300dc1d ("iio: potentiostat: add LMP91000 support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210501171352.512953-8-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>