<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/infiniband/ulp/srpt, branch v3.18.5</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>srp-target: Retry when QP creation fails with ENOMEM</title>
<updated>2014-10-28T20:55:08+00:00</updated>
<author>
<name>Bart Van Assche</name>
<email>bvanassche@acm.org</email>
</author>
<published>2014-10-19T15:05:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=ab477c1ff5e0a744c072404bf7db51bfe1f05b6e'/>
<id>ab477c1ff5e0a744c072404bf7db51bfe1f05b6e</id>
<content type='text'>
It is not guaranteed to that srp_sq_size is supported
by the HCA. So if we failed to create the QP with ENOMEM,
try with a smaller srp_sq_size. Keep it up until we hit
MIN_SRPT_SQ_SIZE, then fail the connection.

Reported-by: Mark Lehrer &lt;lehrer@gmail.com&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Sagi Grimberg &lt;sagig@mellanox.com&gt;
Cc: &lt;stable@vger.kernel.org&gt; # 3.4+
Signed-off-by: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
It is not guaranteed to that srp_sq_size is supported
by the HCA. So if we failed to create the QP with ENOMEM,
try with a smaller srp_sq_size. Keep it up until we hit
MIN_SRPT_SQ_SIZE, then fail the connection.

Reported-by: Mark Lehrer &lt;lehrer@gmail.com&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Sagi Grimberg &lt;sagig@mellanox.com&gt;
Cc: &lt;stable@vger.kernel.org&gt; # 3.4+
Signed-off-by: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ib_srpt: replace strnicmp with strncasecmp</title>
<updated>2014-10-14T00:18:25+00:00</updated>
<author>
<name>Rasmus Villemoes</name>
<email>linux@rasmusvillemoes.dk</email>
</author>
<published>2014-10-13T22:54:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=b60459f080bf3a1fcc6f55cfb628d1d79423b6ff'/>
<id>b60459f080bf3a1fcc6f55cfb628d1d79423b6ff</id>
<content type='text'>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp.  The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.

To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.

Signed-off-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Cc: Roland Dreier &lt;roland@kernel.org&gt;
Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp.  The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.

To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.

Signed-off-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Cc: Roland Dreier &lt;roland@kernel.org&gt;
Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branches 'core', 'cxgb4', 'ipoib', 'iser', 'iwcm', 'mad', 'misc', 'mlx4', 'mlx5', 'ocrdma' and 'srp' into for-next</title>
<updated>2014-08-14T15:58:04+00:00</updated>
<author>
<name>Roland Dreier</name>
<email>roland@purestorage.com</email>
</author>
<published>2014-08-14T15:58:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=d087f6ad724dfbcdc3df8e0191b80d9d8d839e71'/>
<id>d087f6ad724dfbcdc3df8e0191b80d9d8d839e71</id>
<content type='text'>
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
</pre>
</div>
</content>
</entry>
<entry>
<title>IB/srpt: Handle GID change events</title>
<updated>2014-08-13T05:01:55+00:00</updated>
<author>
<name>Doug Ledford</name>
<email>dledford@redhat.com</email>
</author>
<published>2014-08-12T23:20:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=2aa1cf64aa576671b3593d73a6cb0a28b90ee444'/>
<id>2aa1cf64aa576671b3593d73a6cb0a28b90ee444</id>
<content type='text'>
GID change events need a refresh just like LID change events and several
others.  Handle this the same as the others.

Signed-off-by: Doug Ledford &lt;dledford@redhat.com&gt;
Signed-off-by: Roland Dreier &lt;roland@purestorage.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
GID change events need a refresh just like LID change events and several
others.  Handle this the same as the others.

Signed-off-by: Doug Ledford &lt;dledford@redhat.com&gt;
Signed-off-by: Roland Dreier &lt;roland@purestorage.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>IB/mad: add new ioctl to ABI to support new registration options</title>
<updated>2014-08-11T03:36:00+00:00</updated>
<author>
<name>Ira Weiny</name>
<email>ira.weiny@intel.com</email>
</author>
<published>2014-08-08T23:00:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=0f29b46d49b0ca50536632c6a33986c3171f5ea1'/>
<id>0f29b46d49b0ca50536632c6a33986c3171f5ea1</id>
<content type='text'>
Registrations options are specified through flags.  Definitions of flags will
be in subsequent patches.

Signed-off-by: Ira Weiny &lt;ira.weiny@intel.com&gt;
Signed-off-by: Roland Dreier &lt;roland@purestorage.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Registrations options are specified through flags.  Definitions of flags will
be in subsequent patches.

Signed-off-by: Ira Weiny &lt;ira.weiny@intel.com&gt;
Signed-off-by: Roland Dreier &lt;roland@purestorage.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ib_srpt: Use correct ib_sg_dma primitives</title>
<updated>2014-04-11T22:31:20+00:00</updated>
<author>
<name>Mike Marciniszyn</name>
<email>mike.marciniszyn@intel.com</email>
</author>
<published>2014-04-07T17:58:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=b076808051f2c80d38e03fb2f1294f525c7a446d'/>
<id>b076808051f2c80d38e03fb2f1294f525c7a446d</id>
<content type='text'>
The code was incorrectly using sg_dma_address() and
sg_dma_len() instead of ib_sg_dma_address() and
ib_sg_dma_len().

This prevents srpt from functioning with the
Intel HCA and indeed will corrupt memory
badly.

Cc: Bart Van Assche &lt;bvanassche@acm.org&gt;
Reviewed-by: Dennis Dalessandro &lt;dennis.dalessandro@intel.com&gt;
Tested-by: Vinod Kumar &lt;vinod.kumar@intel.com&gt;
Signed-off-by: Mike Marciniszyn &lt;mike.marciniszyn@intel.com&gt;
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The code was incorrectly using sg_dma_address() and
sg_dma_len() instead of ib_sg_dma_address() and
ib_sg_dma_len().

This prevents srpt from functioning with the
Intel HCA and indeed will corrupt memory
badly.

Cc: Bart Van Assche &lt;bvanassche@acm.org&gt;
Reviewed-by: Dennis Dalessandro &lt;dennis.dalessandro@intel.com&gt;
Tested-by: Vinod Kumar &lt;vinod.kumar@intel.com&gt;
Signed-off-by: Mike Marciniszyn &lt;mike.marciniszyn@intel.com&gt;
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>target: Pass in transport supported PI at session initialization</title>
<updated>2014-04-07T08:48:54+00:00</updated>
<author>
<name>Nicholas Bellinger</name>
<email>nab@linux-iscsi.org</email>
</author>
<published>2014-04-02T19:52:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=e70beee783d6977d80eede88a3394f02eabddad1'/>
<id>e70beee783d6977d80eede88a3394f02eabddad1</id>
<content type='text'>
In order to support local WRITE_INSERT + READ_STRIP operations for
non PI enabled fabrics, the fabric driver needs to be able signal
what protection offload operations are supported.

This is done at session initialization time so the modes can be
signaled by individual se_wwn + se_portal_group endpoints, as well
as optionally across different transports on the same endpoint.

For iser-target, set TARGET_PROT_ALL if the underlying ib_device
has already signaled PI offload support, and allow this to be
exposed via a new iscsit_transport-&gt;iscsit_get_sup_prot_ops()
callback.

For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode
operation.

For all other drivers, set TARGET_PROT_NORMAL to disable fabric
level PI.

Cc: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
Cc: Sagi Grimberg &lt;sagig@mellanox.com&gt;
Cc: Or Gerlitz &lt;ogerlitz@mellanox.com&gt;
Cc: Quinn Tran &lt;quinn.tran@qlogic.com&gt;
Cc: Giridhar Malavali &lt;giridhar.malavali@qlogic.com&gt;
Signed-off-by: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In order to support local WRITE_INSERT + READ_STRIP operations for
non PI enabled fabrics, the fabric driver needs to be able signal
what protection offload operations are supported.

This is done at session initialization time so the modes can be
signaled by individual se_wwn + se_portal_group endpoints, as well
as optionally across different transports on the same endpoint.

For iser-target, set TARGET_PROT_ALL if the underlying ib_device
has already signaled PI offload support, and allow this to be
exposed via a new iscsit_transport-&gt;iscsit_get_sup_prot_ops()
callback.

For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode
operation.

For all other drivers, set TARGET_PROT_NORMAL to disable fabric
level PI.

Cc: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
Cc: Sagi Grimberg &lt;sagig@mellanox.com&gt;
Cc: Or Gerlitz &lt;ogerlitz@mellanox.com&gt;
Cc: Quinn Tran &lt;quinn.tran@qlogic.com&gt;
Cc: Giridhar Malavali &lt;giridhar.malavali@qlogic.com&gt;
Signed-off-by: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>target: Add TFO-&gt;abort_task for aborted task resources release</title>
<updated>2014-04-07T08:48:51+00:00</updated>
<author>
<name>Nicholas Bellinger</name>
<email>nab@linux-iscsi.org</email>
</author>
<published>2014-03-22T21:55:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=131e6abc674edb9f9a59090bb35bf6650569b7e7'/>
<id>131e6abc674edb9f9a59090bb35bf6650569b7e7</id>
<content type='text'>
Now that TASK_ABORTED status is not generated for all cases by
TMR ABORT_TASK + LUN_RESET, a new TFO-&gt;abort_task() caller is
necessary in order to give fabric drivers a chance to unmap
hardware / software resources before the se_cmd descriptor is
released via the normal TFO-&gt;release_cmd() codepath.

This patch adds TFO-&gt;aborted_task() in core_tmr_abort_task()
in place of the original transport_send_task_abort(), and
also updates all fabric drivers to implement this caller.

The fabric drivers that include changes to perform cleanup
via -&gt;aborted_task() are:

  - iscsi-target
  - iser-target
  - srpt
  - tcm_qla2xxx

The fabric drivers that currently set -&gt;aborted_task() to
NOPs are:

  - loopback
  - tcm_fc
  - usb-gadget
  - sbp-target
  - vhost-scsi

For the latter five, there appears to be no additional cleanup
required before invoking TFO-&gt;release_cmd() to release the
se_cmd descriptor.

v2 changes:
  - Move -&gt;aborted_task() call into transport_cmd_finish_abort (Alex)

Cc: Alex Leung &lt;amleung21@yahoo.com&gt;
Cc: Mark Rustad &lt;mark.d.rustad@intel.com&gt;
Cc: Roland Dreier &lt;roland@kernel.org&gt;
Cc: Vu Pham &lt;vu@mellanox.com&gt;
Cc: Chris Boot &lt;bootc@bootc.net&gt;
Cc: Sebastian Andrzej Siewior &lt;bigeasy@linutronix.de&gt;
Cc: Michael S. Tsirkin &lt;mst@redhat.com&gt;
Cc: Giridhar Malavali &lt;giridhar.malavali@qlogic.com&gt;
Cc: Saurav Kashyap &lt;saurav.kashyap@qlogic.com&gt;
Cc: Quinn Tran &lt;quinn.tran@qlogic.com&gt;
Cc: Sagi Grimberg &lt;sagig@mellanox.com&gt;
Cc: Or Gerlitz &lt;ogerlitz@mellanox.com&gt;
Signed-off-by: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Now that TASK_ABORTED status is not generated for all cases by
TMR ABORT_TASK + LUN_RESET, a new TFO-&gt;abort_task() caller is
necessary in order to give fabric drivers a chance to unmap
hardware / software resources before the se_cmd descriptor is
released via the normal TFO-&gt;release_cmd() codepath.

This patch adds TFO-&gt;aborted_task() in core_tmr_abort_task()
in place of the original transport_send_task_abort(), and
also updates all fabric drivers to implement this caller.

The fabric drivers that include changes to perform cleanup
via -&gt;aborted_task() are:

  - iscsi-target
  - iser-target
  - srpt
  - tcm_qla2xxx

The fabric drivers that currently set -&gt;aborted_task() to
NOPs are:

  - loopback
  - tcm_fc
  - usb-gadget
  - sbp-target
  - vhost-scsi

For the latter five, there appears to be no additional cleanup
required before invoking TFO-&gt;release_cmd() to release the
se_cmd descriptor.

v2 changes:
  - Move -&gt;aborted_task() call into transport_cmd_finish_abort (Alex)

Cc: Alex Leung &lt;amleung21@yahoo.com&gt;
Cc: Mark Rustad &lt;mark.d.rustad@intel.com&gt;
Cc: Roland Dreier &lt;roland@kernel.org&gt;
Cc: Vu Pham &lt;vu@mellanox.com&gt;
Cc: Chris Boot &lt;bootc@bootc.net&gt;
Cc: Sebastian Andrzej Siewior &lt;bigeasy@linutronix.de&gt;
Cc: Michael S. Tsirkin &lt;mst@redhat.com&gt;
Cc: Giridhar Malavali &lt;giridhar.malavali@qlogic.com&gt;
Cc: Saurav Kashyap &lt;saurav.kashyap@qlogic.com&gt;
Cc: Quinn Tran &lt;quinn.tran@qlogic.com&gt;
Cc: Sagi Grimberg &lt;sagig@mellanox.com&gt;
Cc: Or Gerlitz &lt;ogerlitz@mellanox.com&gt;
Signed-off-by: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>IB/srpt: replace strict_strtoul() with kstrtoul()</title>
<updated>2014-02-12T23:14:40+00:00</updated>
<author>
<name>Jingoo Han</name>
<email>jg1.han@samsung.com</email>
</author>
<published>2014-02-05T02:22:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=9d8abf45944e4f1c18a04070fc3ed2f3ffcbbcb6'/>
<id>9d8abf45944e4f1c18a04070fc3ed2f3ffcbbcb6</id>
<content type='text'>
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han &lt;jg1.han@samsung.com&gt;
Signed-off-by: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han &lt;jg1.han@samsung.com&gt;
Signed-off-by: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending</title>
<updated>2013-11-22T18:52:03+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-11-22T18:52:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=b0e3636f656c98bdeded5aaa78601e3256b18d6d'/>
<id>b0e3636f656c98bdeded5aaa78601e3256b18d6d</id>
<content type='text'>
Pull SCSI target updates from Nicholas Bellinger:
 "Things have been quiet this round with mostly bugfixes, percpu
  conversions, and other minor iscsi-target conformance testing changes.

  The highlights include:

   - Add demo_mode_discovery attribute for iscsi-target (Thomas)
   - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation
   - Add send completion interrupt coalescing for ib_isert
   - Convert target-core to use percpu-refcounting for se_lun
   - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn
   - tcm_loop updates (Hannes)
   - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes)

  v3.14 is currently shaping to be a busy development cycle in target
  land, with initial support for T10 Referrals and T10 DIF currently on
  the roadmap"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
  iscsi-target: chap auth shouldn't match username with trailing garbage
  iscsi-target: fix extract_param to handle buffer length corner case
  iscsi-target: Expose default_erl as TPG attribute
  target_core_configfs: split up ALUA supported states
  target_core_alua: Make supported states configurable
  target_core_alua: Store supported ALUA states
  target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
  target_core_alua: spellcheck
  target core: rename (ex,im)plict -&gt; (ex,im)plicit
  percpu-refcount: Add percpu-refcount.o to obj-y
  iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
  iscsi-target: Convert iscsi_session statistics to atomic_long_t
  target: Convert se_device statistics to atomic_long_t
  target: Fix delayed Task Aborted Status (TAS) handling bug
  iscsi-target: Reject unsupported multi PDU text command sequence
  ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call
  iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn
  target: Core does not need blkdev.h
  target: Pass through I/O topology for block backstores
  iser-target: Avoid using FRMR for single dma entry requests
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull SCSI target updates from Nicholas Bellinger:
 "Things have been quiet this round with mostly bugfixes, percpu
  conversions, and other minor iscsi-target conformance testing changes.

  The highlights include:

   - Add demo_mode_discovery attribute for iscsi-target (Thomas)
   - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation
   - Add send completion interrupt coalescing for ib_isert
   - Convert target-core to use percpu-refcounting for se_lun
   - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn
   - tcm_loop updates (Hannes)
   - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes)

  v3.14 is currently shaping to be a busy development cycle in target
  land, with initial support for T10 Referrals and T10 DIF currently on
  the roadmap"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
  iscsi-target: chap auth shouldn't match username with trailing garbage
  iscsi-target: fix extract_param to handle buffer length corner case
  iscsi-target: Expose default_erl as TPG attribute
  target_core_configfs: split up ALUA supported states
  target_core_alua: Make supported states configurable
  target_core_alua: Store supported ALUA states
  target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
  target_core_alua: spellcheck
  target core: rename (ex,im)plict -&gt; (ex,im)plicit
  percpu-refcount: Add percpu-refcount.o to obj-y
  iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
  iscsi-target: Convert iscsi_session statistics to atomic_long_t
  target: Convert se_device statistics to atomic_long_t
  target: Fix delayed Task Aborted Status (TAS) handling bug
  iscsi-target: Reject unsupported multi PDU text command sequence
  ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call
  iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn
  target: Core does not need blkdev.h
  target: Pass through I/O topology for block backstores
  iser-target: Avoid using FRMR for single dma entry requests
  ...
</pre>
</div>
</content>
</entry>
</feed>
