Add support for the I2C-connected Awinic AW86927 LRA haptic driver. This driver includes a hardcoded sine waveform to be uploaded to the AW86927's SRAM for haptic playback. This driver does not currently support all the capabilities of the AW86927, such as F0 calibration, RTP mode, and CONT mode. Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com> Link: https://lore.kernel.org/r/20250925-aw86927-v3-2-1fc6265b42de@fairphone.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sync up with MFD tree to bring in support for MAX7360.
Add driver for Maxim Integrated MAX7360 rotary encoder controller, supporting a single rotary switch. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com> Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-9-435cfda2b1ea@bootlin.com Signed-off-by: Lee Jones <lee@kernel.org>
TPS6594 defines two interrupts for the power button one for push and one for release. This driver is very simple in that it maps the push interrupt to a key input and the release interrupt to a key release. Signed-off-by: Job Sava <jsava@criticallink.com> Signed-off-by: Michael Walle <mwalle@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20250826134631.1499936-2-mwalle@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
The pcf50633 was used as part of the OpenMoko devices but the support
for its main chip was recently removed in: commit 61b7f8920b17 ("ARM:
s3c: remove all s3c24xx support")
Remove the input driver.
This was originally posted as a set of pcf50633 removals in March,
and is the only major component that hasn't been picked up.
https://lore.kernel.org/all/20250311014959.743322-1-linux@treblig.org/
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250629212820.319584-1-linux@treblig.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The MCU controls the power-button and beeper, so expose them as input device. There is of course no interrupt line, so the status of the power-button needs to be polled. To generate an event the power-button also needs to be held for 1-2 seconds, so the polling interval does not need to be overly fast. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20241107114712.538976-7-heiko@sntech.de Signed-off-by: Lee Jones <lee@kernel.org>
Marvell 88PM886 PMIC provides onkey among other things. Add client driver to handle it. The driver currently only provides a basic support omitting additional functions found in the vendor version, such as long onkey and GPIO integration. Signed-off-by: Karel Balej <balejk@matfyz.cz> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20240531175109.15599-5-balejk@matfyz.cz Signed-off-by: Lee Jones <lee@kernel.org>
Introduce support for Cirrus Logic Device CS40L50: a haptic driver with waveform memory, integrated DSP, and closed-loop algorithms. The input driver provides the interface for control of haptic effects through the device. Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com> Reviewed-by: Jeff LaBundy <jeff@labundy.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20240620161745.2312359-5-jogletre@opensource.cirrus.com Signed-off-by: Lee Jones <lee@kernel.org>
The ON/OFF logic inside the BBNSM allows for connecting directly into a PMIC or other voltage regulator device. The module has an button input signal and a wakeup request input signal. It also has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an active-low PMIC enable (pmic_en_b) output. Add the power key support for the ON/OFF button function found in BBNSM module. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20230215024117.3357341-2-ping.bai@nxp.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>