linux.git/drivers/input/touchscreen, branch v3.16.81 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Input: mms114 - fix license module information 2018-06-16T21:22:05+00:00 Andi Shyti andi.shyti@samsung.com 2018-02-01T18:18:59+00:00 95b12df8b45babb0634e94189ba207d7dd192e87 commit 498e7e7ed1fd72c275a682f0903c4a20cc538658 upstream. The driver has been released with GNU Public License v2 as stated in the header, but the module license information has been tagged as "GPL" (GNU Public License v2 or later). Fix the module license information so that it matches the one in the header as "GPL v2". Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver") Reported-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 498e7e7ed1fd72c275a682f0903c4a20cc538658 upstream.

The driver has been released with GNU Public License v2 as stated
in the header, but the module license information has been tagged
as "GPL" (GNU Public License v2 or later).

Fix the module license information so that it matches the one in
the header as "GPL v2".

Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Reported-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Input: edt-ft5x06 - fix error handling for factory mode on non-M06 2018-06-16T21:21:59+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2018-01-23T18:01:57+00:00 4731ab91f3ca537767d9920fa86ee7ea469fd2c0 commit 4b3e910d7f430ab76dd37131bb75129878950163 upstream. When attempting enter factory mode on firmware that does not support it, we'd error out, but leave the device with interrupts disabled, and thus touch not working. Fix it by moving the check before we disable interrupts/allocate memory for debug buffers. Fixes: fd335ab04b3f ("Input: edt-ft5x06 - add support for M09 firmware version") Reviewed-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [bwh: Backported to 3.16: - s/EDT_M06/M06/ - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 4b3e910d7f430ab76dd37131bb75129878950163 upstream.

When attempting enter factory mode on firmware that does not support it,
we'd error out, but leave the device with interrupts disabled, and thus
touch not working. Fix it by moving the check before we disable
interrupts/allocate memory for debug buffers.

Fixes: fd335ab04b3f ("Input: edt-ft5x06 - add support for M09 firmware version")
Reviewed-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[bwh: Backported to 3.16:
 - s/EDT_M06/M06/
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Input: 88pm860x-ts - fix child-node lookup 2018-03-03T15:52:18+00:00 Johan Hovold johan@kernel.org 2018-01-09T01:20:18+00:00 829fb0cab7376e67b24f6aa6210242d448396cef commit 906bf7daa0618d0ef39f4872ca42218c29a3631f upstream. Fix child node-lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Fixes: 2e57d56747e6 ("mfd: 88pm860x: Device tree support") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 906bf7daa0618d0ef39f4872ca42218c29a3631f upstream.

Fix child node-lookup during probe, which ended up searching the whole
device tree depth-first starting at parent rather than just matching on
its children.

To make things worse, the parent node was prematurely freed, while the
child node was leaked.

Fixes: 2e57d56747e6 ("mfd: 88pm860x: Device tree support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen 2018-01-01T20:51:56+00:00 Jeff Lance j-lance1@ti.com 2017-10-19T00:25:52+00:00 30fe79f8171f5165aba9e043868fc9cf53c36b2e commit cf5dd48907bebaefdb43a8ca079be77e8da2cb20 upstream. Step config setting for 5 wire touchscreen is incorrect for Y coordinates. It was broken while we moved to DT. If you look close at the offending commit bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable"), the change was: - STEPCONFIG_XNP | STEPCONFIG_YPN; + ts_dev->bit_xn | ts_dev->bit_yp; while bit_xn = STEPCONFIG_XNN and bit_yp = STEPCONFIG_YNN. Not quite the same. Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable") Signed-off-by: Jeff Lance <j-lance1@ti.com> [vigneshr@ti.com: Rebase to v4.14-rc1] Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit cf5dd48907bebaefdb43a8ca079be77e8da2cb20 upstream.

Step config setting for 5 wire touchscreen is incorrect for Y coordinates.
It was broken while we moved to DT. If you look close at the offending
commit bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made
configurable"), the change was:

- STEPCONFIG_XNP | STEPCONFIG_YPN;
+ ts_dev->bit_xn | ts_dev->bit_yp;

while bit_xn = STEPCONFIG_XNN and bit_yp = STEPCONFIG_YNN. Not quite the
same.

Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Signed-off-by: Jeff Lance <j-lance1@ti.com>
[vigneshr@ti.com: Rebase to v4.14-rc1]
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Input: ucb1400_ts - fix suspend and resume handling 2017-11-26T13:50:36+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2017-09-01T01:23:11+00:00 f966d4c54e1c1e3769c297fc9899ed8a82326061 commit 39467fc1054a91efa697162a94e5b0e1a4b7b580 upstream. Instead of stopping the touchscreen we were starting it in suspend, and disabling it in resume. Fixes: c899afedf168 ("Input: ucb1400_ts - convert to threaded IRQ") Reported-by: Anton Volkov <avolkov@ispras.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 39467fc1054a91efa697162a94e5b0e1a4b7b580 upstream.

Instead of stopping the touchscreen we were starting it in suspend, and
disabling it in resume.

Fixes: c899afedf168 ("Input: ucb1400_ts - convert to threaded IRQ")
Reported-by: Anton Volkov <avolkov@ispras.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Input: ads7846 - correct the value got from SPI 2017-10-12T14:28:16+00:00 Andrey Gelman andrey.gelman@compulab.co.il 2015-10-06T22:43:43+00:00 34fff37b6442a580a8b7e91aa93dd647c7d50dde commit 879f2fea8a5a748bcbf98d2cdce9139c045505d3 upstream. According to the touch controller spec, SPI return a 16 bit value, only 12 bits are valid, they are bit[14-3]. The value of MISO and MOSI can be configured when SPI is in idle mode. Currently this touch driver assumes the SPI bus sets the MOSI and MISO in low level when SPI bus is in idle mode. So the bit[15] of the value got from SPI bus is always 0. But when SPI bus congfigures the MOSI and MISO in high level during the SPI idle mode, the bit[15] of the value get from SPI is always 1. If bit[15] is not masked, we may get the wrong value. Mask the invalid bit to make sure the correct value gets returned. Regardless of the SPI bus idle configuration. Signed-off-by: Andrey Gelman <andrey.gelman@compulab.co.il> Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 879f2fea8a5a748bcbf98d2cdce9139c045505d3 upstream.

According to the touch controller spec, SPI return a 16 bit value, only 12
bits are valid, they are bit[14-3].

The value of MISO and MOSI can be configured when SPI is in idle mode.
Currently this touch driver assumes the SPI bus sets the MOSI and MISO in
low level when SPI bus is in idle mode. So the bit[15] of the value got
from SPI bus is always 0. But when SPI bus congfigures the MOSI and MISO in
high level during the SPI idle mode, the bit[15] of the value get from SPI
is always 1. If bit[15] is not masked, we may get the wrong value.

Mask the invalid bit to make sure the correct value gets returned.
Regardless of the SPI bus idle configuration.

Signed-off-by: Andrey Gelman <andrey.gelman@compulab.co.il>
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Input: sur40 - validate number of endpoints before using them 2017-07-18T17:40:17+00:00 Johan Hovold johan@kernel.org 2017-03-16T18:43:09+00:00 3ea1b00b548d2975d623b01d464086df61de0fe5 commit 92461f5d723037530c1f36cce93640770037812c upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory that lie beyond the end of the endpoint array should a malicious device lack the expected endpoints. Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40... ") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 92461f5d723037530c1f36cce93640770037812c upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory that lie beyond the end of the endpoint
array should a malicious device lack the expected endpoints.

Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40... ")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Input: wacom_w8001 - w8001_MAX_LENGTH should be 13 2016-08-22T21:38:19+00:00 Ping Cheng pinglinux@gmail.com 2016-06-23T17:54:17+00:00 9a20812eff5c824de84f66d574ee239e233892f1 commit 12afb34400eb2b301f06b2aa3535497d14faee59 upstream. Somehow the patch that added two-finger touch support forgot to update W8001_MAX_LENGTH from 11 to 13. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 12afb34400eb2b301f06b2aa3535497d14faee59 upstream.

Somehow the patch that added two-finger touch support forgot to update
W8001_MAX_LENGTH from 11 to 13.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen 2015-08-11T08:57:44+00:00 Bernhard Bender bernhard.bender@bytecmed.com 2015-07-23T20:58:08+00:00 2157661d38cd2bbf98e48ce12b84b8a362f1c710 commit 968491709e5b1aaf429428814fff3d932fa90b60 upstream. This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Suggested-by: Jakob Mustafa <jakob.mustafa@bytecmed.com> Signed-off-by: Bernhard Bender <bernhard.bender@bytecmed.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com> 
commit 968491709e5b1aaf429428814fff3d932fa90b60 upstream.

This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30
touch screen.  Due to a missing delay between the RESET and SET_RATE
commands, the touch screen may become unresponsive during system startup or
driver loading.

According to the DMC documentation, a delay is needed after the RESET
command to allow the chip to complete its internal initialization. As this
delay is not guaranteed, we had a system where the touch screen
occasionally did not send any touch data. There was no other indication of
the problem.

The patch fixes the problem by adding a 150ms delay between the RESET and
SET_RATE commands.

Suggested-by: Jakob Mustafa <jakob.mustafa@bytecmed.com>
Signed-off-by: Bernhard Bender <bernhard.bender@bytecmed.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2014-07-23T22:42:53+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-07-23T22:42:53+00:00 b292d6b5c4220d527c92316c0d11d16e9895f07e Pull input layer fixes from Dmitry Torokhov: "A few fixups for the input subsystem" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document INPUT_PROP_TOPBUTTONPAD Input: fix defuzzing logic Input: sirfsoc-onkey - fix GPL v2 license string typo Input: st-keyscan - fix 'defined but not used' compiler warnings Input: synaptics - add min/max quirk for pnp-id LEN2002 (Edge E531) Input: i8042 - add Acer Aspire 5710 to nomux blacklist Input: ti_am335x_tsc - warn about incorrect spelling Input: wacom - cleanup multitouch code when touch_max is 2 
Pull input layer fixes from Dmitry Torokhov:
 "A few fixups for the input subsystem"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: document INPUT_PROP_TOPBUTTONPAD
  Input: fix defuzzing logic
  Input: sirfsoc-onkey - fix GPL v2 license string typo
  Input: st-keyscan - fix 'defined but not used' compiler warnings
  Input: synaptics - add min/max quirk for pnp-id LEN2002 (Edge E531)
  Input: i8042 - add Acer Aspire 5710 to nomux blacklist
  Input: ti_am335x_tsc - warn about incorrect spelling
  Input: wacom - cleanup multitouch code when touch_max is 2