Pull input fixes from Dmitry Torokhov:
 "A small fixup to ili210x touchscreen driver, and updated maintainer
  entry for the device tree binding of Mediatek 6779 keypad:

   - fix reset timing of Ilitek touchscreens

   - update maintainer entry of DT binding of Mediatek 6779 keypad"

* tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ili210x - use one common reset implementation
  Input: ili210x - fix reset timing
  dt-bindings: input: mediatek,mt6779-keypad: update maintainer

Rename ili251x_hardware_reset() to ili210x_hardware_reset(), change its
parameter from struct device * to struct gpio_desc *, and use it as one
single consistent reset implementation all over the driver. Also increase
the minimum reset duration to 12ms, to make sure the reset is really
within the spec.

Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518210423.106555-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30
"2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum
10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset
timings such that T4 is 12ms and T2 is 160ms to fit those figures.

This prevents sporadic touch controller start up failures when some
systems with at least ILI251x controller boot, without this patch
the systems sometimes fail to communicate with the touch controller.

Fixes: 201f3c803544c ("Input: ili210x - add reset GPIO support")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull input updates from Dmitry Torokhov:

 - a revert of a patch resetting extra buttons on touchpads claiming to
   be buttonpads as this caused regression on certain Dell devices

 - a new driver for Mediatek MT6779 keypad

 - a new driver for Imagis touchscreen

 - rework of Google/Chrome OS "Vivaldi" keyboard handling

 - assorted driver fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (31 commits)
  Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
  Input: adi - remove redundant variable z
  Input: add Imagis touchscreen driver
  dt-bindings: input/touchscreen: bindings for Imagis
  Input: synaptics - enable InterTouch on ThinkPad T14/P14s Gen 1 AMD
  Input: stmfts - fix reference leak in stmfts_input_open
  Input: add bounds checking to input_set_capability()
  Input: iqs5xx - use local input_dev pointer
  HID: google: modify HID device groups of eel
  HID: google: Add support for vivaldi to hid-hammer
  HID: google: extract Vivaldi hid feature mapping for use in hid-hammer
  Input: extract ChromeOS vivaldi physmap show function
  HID: google: switch to devm when registering keyboard backlight LED
  Input: mt6779-keypad - fix signedness bug
  Input: mt6779-keypad - add MediaTek keypad driver
  dt-bindings: input: Add bindings for Mediatek matrix keypad
  Input: da9063 - use devm_delayed_work_autocancel()
  Input: goodix - fix race on driver unbind
  Input: goodix - use input_copy_abs() helper
  Input: add input_copy_abs() function
  ...

Prepare input updates for 5.18 merge window.

Pull media updates from Mauro Carvalho Chehab:

 - a major reorg at platform Kconfig/Makefile files, organizing them per
   vendor. The other media Kconfig/Makefile files also sorted

 - New sensor drivers: hi847, isl7998x, ov08d10

 - New Amphion vpu decoder stateful driver

 - New Atmel microchip csi2dc driver

 - tegra-vde driver promoted from staging

 - atomisp: some fixes for it to work on BYT

 - imx7-mipi-csis driver promoted from staging and renamed

 - camss driver got initial support for VFE hardware version Titan 480

 - mtk-vcodec has gained support for MT8192

 - lots of driver changes, fixes and improvements

* tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (417 commits)
  media: nxp: Restrict VIDEO_IMX_MIPI_CSIS to ARCH_MXC or COMPILE_TEST
  media: amphion: cleanup media device if register it fail
  media: amphion: fix some issues to improve robust
  media: amphion: fix some error related with undefined reference to __divdi3
  media: amphion: fix an issue that using pm_runtime_get_sync incorrectly
  media: vidtv: use vfree() for memory allocated with vzalloc()
  media: m5mols/m5mols.h: document new reset field
  media: pixfmt-yuv-planar.rst: fix PIX_FMT labels
  media: platform: Remove unnecessary print function dev_err()
  media: amphion: Add missing of_node_put() in vpu_core_parse_dt()
  media: mtk-vcodec: Add missing of_node_put() in mtk_vdec_hw_prob_done()
  media: platform: amphion: Fix build error without MAILBOX
  media: spi: Kconfig: Place SPI drivers on a single menu
  media: i2c: Kconfig: move camera drivers to the top
  media: atomisp: fix bad usage at error handling logic
  media: platform: rename mediatek/mtk-jpeg/ to mediatek/jpeg/
  media: media/*/Kconfig: sort entries
  media: Kconfig: cleanup VIDEO_DEV dependencies
  media: platform/*/Kconfig: make manufacturer menus more uniform
  media: platform: Create vendor/{Makefile,Kconfig} files
  ...

Pull spi updates from Mark Brown:
 "The overwhelming bulk of this pull request is a change from Uwe
  Kleine-König which changes the return type of the remove() function to
  void as part of some wider work he's doing to do this for all bus
  types, causing updates to most SPI device drivers. The branch with
  that on has been cross merged with a couple of other trees which added
  new SPI drivers this cycle, I'm not expecting any build issues
  resulting from the change.

  Otherwise it's been a relatively quiet release with some new device
  support, a few minor features and the welcome completion of the
  conversion of the subsystem to use GPIO descriptors rather than
  numbers:

   - Change return type of remove() to void.

   - Completion of the conversion of SPI controller drivers to use GPIO
     descriptors rather than numbers.

   - Quite a few DT schema conversions.

   - Support for multiple SPI devices on a bus in ACPI systems.

   - Big overhaul of the PXA2xx SPI driver.

   - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
     MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
     Sunplus SP7021"

[ And this is obviously where that spi change that snuck into the
  regulator tree _should_ have been :^]

* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
  spi: fsi: Implement a timeout for polling status
  spi: Fix erroneous sgs value with min_t()
  spi: tegra20: Use of_device_get_match_data()
  spi: mediatek: add ipm design support for MT7986
  spi: Add compatible for MT7986
  spi: sun4i: fix typos in comments
  spi: mediatek: support tick_delay without enhance_timing
  spi: Update clock-names property for arm pl022
  spi: rockchip-sfc: fix platform_get_irq.cocci warning
  spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
  spi: dt-bindings: samsung: Add fsd spi compatible
  spi: topcliff-pch: Prevent usage of potentially stale DMA device
  spi: tegra210-quad: combined sequence mode
  spi: tegra210-quad: add acpi support
  spi: npcm-fiu: Fix typo ("npxm")
  spi: Fix Tegra QSPI example
  spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
  spi: cadence: fix platform_get_irq.cocci warning
  spi: Update NXP Flexspi maintainer details
  dt-bindings: mfd: maxim,max77802: Convert to dtschema
  ...

Add support for the IST3038C touchscreen IC from Imagis, based on
downstream driver. The driver supports multi-touch (10 touch points)
The IST3038C IC supports touch keys, but the support isn't added
because the touch screen used for testing doesn't utilize touch keys.
Looking at the downstream driver, it is possible to add support
for other Imagis ICs of IST30**C series.

Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220305165330.13061-3-markuss.broks@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stmfts_input_open, so we should fix it.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Both iqs5xx_axis_init() and iqs5xx_irq() already define a local
input_dev pointer 'input'. Use this instead of iqs5xx->input so
as to make the code a bit smaller.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220320025707.404544-1-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>