linux.git/drivers/input/touchscreen, branch v6.12.80

Input: ti_am335x_tsc - fix off-by-one error in wire_order validation

2026-01-08T09:14:06+00:00

commit 248d3a73a0167dce15ba100477c3e778c4787178 upstream.

The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.

Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.

Signed-off-by: Junjie Cao 
Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com
Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: goodix - add support for ACPI ID GDIX1003

2025-12-01T10:43:23+00:00

commit c6d99e488117201c63efd747ce17b80687c3f5a9 upstream.

Some newer devices use an ACPI hardware ID of GDIX1003 for their Goodix
touchscreen controller, instead of GDIX1001 / GDIX1002. Add GDIX1003
to the goodix_acpi_match[] table.

Reported-by: Weikang Guo 
Closes: https://lore.kernel.org/linux-input/20250225024409.1467040-1-guoweikang.kernel@gmail.com/
Tested-by: Weikang Guo 
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20251013121022.44333-1-hansg@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: atmel_mxt_ts - allow reset GPIO to sleep

2025-10-15T10:00:23+00:00

commit c7866ee0a9ddd9789faadf58cdac6abd7aabf045 upstream.

The reset GPIO is not toggled in any critical section where it couldn't
sleep, allow the reset GPIO to sleep. This allows the driver to operate
reset GPIOs connected to I2C GPIO expanders.

Signed-off-by: Marek Vasut 
Link: https://lore.kernel.org/r/20251005023335.166483-1-marek.vasut@mailbox.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: cyttsp5 - fix power control issue on wakeup

2025-05-18T06:24:50+00:00

commit 7675b5efd81fe6d524e29d5a541f43201e98afa8 upstream.

The power control function ignores the "on" argument when setting the
report ID, and thus is always sending HID_POWER_SLEEP. This causes a
problem when trying to wakeup.

Fix by sending the state variable, which contains the proper HID_POWER_ON or
HID_POWER_SLEEP based on the "on" argument.

Fixes: 3c98b8dbdced ("Input: cyttsp5 - implement proper sleep and wakeup procedures")
Cc: stable@vger.kernel.org
Signed-off-by: Mikael Gonella-Bolduc 
Signed-off-by: Hugo Villeneuve 
Reviewed-by: Alistair Francis 
Link: https://lore.kernel.org/r/20250423135243.1261460-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: cyttsp5 - ensure minimum reset pulse width

2025-05-18T06:24:50+00:00

commit c6cb8bf79466ae66bd0d07338c7c505ce758e9d7 upstream.

The current reset pulse width is measured to be 5us on a
Renesas RZ/G2L SOM. The manufacturer's minimum reset pulse width is
specified as 10us.

Extend reset pulse width to make sure it is long enough on all platforms.

Also reword confusing comments about reset pin assertion.

Fixes: 5b0c03e24a06 ("Input: Add driver for Cypress Generation 5 touchscreen")
Cc: stable@vger.kernel.org
Acked-by: Alistair Francis 
Signed-off-by: Hugo Villeneuve 
Link: https://lore.kernel.org/r/20250410184633.1164837-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: ads7846 - fix gpiod allocation

2025-03-22T19:54:21+00:00

commit c9ccb88f534ca760d06590b67571c353a2f0cbcd upstream.

commit 767d83361aaa ("Input: ads7846 - Convert to use software nodes")

has simplified the code but accidentially converted a devm_gpiod_get()
to gpiod_get(). This leaves the gpio reserved on module remove and the
driver can no longer be loaded again.

Fixes: 767d83361aaa ("Input: ads7846 - Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller 
Link: https://lore.kernel.org/r/6e9b143f19cdfda835711a8a7a3966e5a2494cff.1738410204.git.hns@goldelico.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: goodix-berlin - fix vddio regulator references

2025-03-22T19:54:21+00:00

commit 3b0011059334a1cf554c2c1f67d7a7b822d8238a upstream.

As per dt-bindings the property is called vddio-supply, so use the
correct name in the driver instead of iovdd. The datasheet also calls
the supply 'VDDIO'.

Fixes: 44362279bdd4 ("Input: add core support for Goodix Berlin Touchscreen IC")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss 
Reviewed-by: Neil Armstrong 
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-2-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2024-11-03T18:35:29+00:00

Pull input fixes from Dmitry Torokhov:

 - a fix for regression in input core introduced in 6.11 preventing
   re-registering input handlers

 - a fix for adp5588-keys driver tyring to disable interrupt 0 at
   suspend when devices is used without interrupt

 - a fix for edt-ft5x06 to stop leaking regmap structure when probing
   fails and to make sure it is not released too early on removal.

* tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: fix regression when re-registering input handlers
  Input: adp5588-keys - do not try to disable interrupt 0
  Input: edt-ft5x06 - fix regmap leak when probe fails

Input: edt-ft5x06 - fix regmap leak when probe fails

2024-10-25T01:38:07+00:00

The driver neglects to free the instance of I2C regmap constructed at
the beginning of the edt_ft5x06_ts_probe() method when probe fails.
Additionally edt_ft5x06_ts_remove() is freeing the regmap too early,
before the rest of the device resources that are managed by devm are
released.

Fix this by installing a custom devm action that will ensure that the
regmap is released at the right time during normal teardown as well as
in case of probe failure.

Note that devm_regmap_init_i2c() could not be used because the driver
may replace the original regmap with a regmap specific for M06 devices
in the middle of the probe, and using devm_regmap_init_i2c() would
result in releasing the M06 regmap too early.

Reported-by: Li Zetao 
Fixes: 9dfd9708ffba ("Input: edt-ft5x06 - convert to use regmap API")
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Graute 
Link: https://lore.kernel.org/r/ZxL6rIlVlgsAu-Jv@google.com
Signed-off-by: Dmitry Torokhov

Merge tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2024-10-19T17:18:03+00:00

Pull input fixes from Dmitry Torokhov:

 - a fix for Zinitix driver to not fail probing if the property enabling
   touch keys functionality is not defined. Support for touch keys was
   added in 6.12 merge window so this issue does not affect users of
   released kernels

 - a couple new vendor/device IDs in xpad driver to enable support for
   more hardware

* tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: zinitix - don't fail if linux,keycodes prop is absent
  Input: xpad - add support for MSI Claw A1M
  Input: xpad - add support for 8BitDo Ultimate 2C Wireless Controller