Pull input fixes from Dmitry Torokhov:

 - a reworked way for handling reset delay on SMBus-connected Synaptics
   touchpads (the original one, while being correct, uncovered an old
   bug in fallback to PS/2 code that was fixed separately; the new one
   however avoids having delay in serio port "fast" resume, and instead
   has the wait in the RMI4 code)

 - a fix for potential crashes when devices with Elan controllers (and
   Synaptics) fall back to PS/2 code. Can't be hit without the original
   patch above, but still good to have it fixed

 - a couple new device IDs in xpad Xbox driver

 - another quirk for Goodix driver to deal with stuff vendors put in
   ACPI tables

 - a fix for use-after-free on disconnect for powermate driver

 - a quirk to not initialize PS/2 mouse port on Fujitsu Lifebook E5411
   laptop as it makes keyboard not usable and the device uses
   hid-over-i2c touchpad anyways

* tag 'input-for-v6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: powermate - fix use-after-free in powermate_config_complete
  Input: xpad - add PXN V900 support
  Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
  Input: psmouse - fix fast_reconnect function for PS/2 mode
  Revert "Input: psmouse - add delay when deactivating for SMBus mode"
  Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case
  Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table
  Input: xpad - add HyperX Clutch Gladiate Support

Add a special case for gpio_count == 1 && gpio_int_idx == 0 to
goodix_add_acpi_gpio_mappings().

It seems that on newer x86/ACPI devices the reset and irq GPIOs are no
longer listed as GPIO resources instead there is only 1 GpioInt resource
and _PS0 does the whole reset sequence for us.

This means that we must call acpi_device_fix_up_power() on these devices
to ensure that the chip is reset before we try to use it.

This part was already fixed in commit 3de93e6ed2df ("Input: goodix - call
acpi_device_fix_up_power() in some cases") by adding a call to
acpi_device_fix_up_power() to the generic "Unexpected ACPI resources"
catch all.

But it turns out that this case on some hw needs some more special
handling. Specifically the firmware may bootup with the IRQ pin in
output mode. The reset sequence from ACPI _PS0 (executed by
acpi_device_fix_up_power()) should put the pin in input mode,
but the GPIO subsystem has cached the direction at bootup, causing
request_irq() to fail due to gpiochip_lock_as_irq() failure:

[    9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0
[    9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060
[    9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8
[    9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[    9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ
[    9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio
[    9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5

Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0
which adds an ACPI GPIO lookup table for the int GPIO even though we cannot
use it for reset purposes (as there is no reset GPIO).

Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call
succeed, which will explicitly set the direction to input fixing the issue.

Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since
there is only 1 GPIO in the ACPI resources the reset entry in that
lookup table will amount to a no-op.

Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull input updates from Dmitry Torokhov:

 - a new driver for Azoteq IQS7210A/7211A/E touch controllers

 - support for Azoteq IQS7222D variant added to iqs7222 driver

 - support for touch keys functionality added to Melfas MMS114 driver

 - new hardware IDs added to exc3000 and Goodix drivers

 - xpad driver gained support for GameSir T4 Kaleid Controller

 - a fix for xpad driver to properly support some third-party
   controllers that need a magic packet to start properly

 - a fix for psmouse driver to more reliably switch to RMI4 mode on
   devices that use native RMI4/SMbus protocol

 - a quirk for i8042 for TUXEDO Gemini 17 Gen1/Clevo PD70PN laptops

 - multiple drivers have been updated to make use of devm and other
   newer APIs such as dev_err_probe(), devm_regulator_get_enable(), and
   others.

* tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (83 commits)
  Input: goodix - add support for ACPI ID GDX9110
  Input: rpckbd - fix the return value handle for platform_get_irq()
  Input: tca6416-keypad - switch to using input core's polling features
  Input: tca6416-keypad - convert to use devm_* api
  Input: tca6416-keypad - fix interrupt enable disbalance
  Input: tca6416-keypad - rely on I2C core to set up suspend/resume
  Input: tca6416-keypad - always expect proper IRQ number in i2c client
  Input: lm8323 - convert to use devm_* api
  Input: lm8323 - rely on device core to create kp_disable attribute
  Input: qt2160 - convert to use devm_* api
  Input: qt2160 - do not hard code interrupt trigger
  Input: qt2160 - switch to using threaded interrupt handler
  Input: qt2160 - tweak check for i2c adapter functionality
  Input: psmouse - add delay when deactivating for SMBus mode
  Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe()
  Input: qt1070 - convert to use devm_* api
  Input: mcs-touchkey - convert to use devm_* api
  Input: amikbd - convert to use devm_* api
  Input: lm8333 - convert to use devm_* api
  Input: mms114 - add support for touch keys
  ...

Prepare input updates for 6.6 merge window.

The Goodix touchscreen controller with ACPI ID GDX9110 was not recognized
by the goodix driver. This patch adds this ID to the list of supported IDs,
allowing the driver to be used with this device. The change will allow
Linux to be used on ~1 million tablet devices used in Kenyan primary
schools.

Signed-off-by: Felix Engelhardt <felix.engelhardt@eidu.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230807124723.382899-1-felix.engelhardt@eidu.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

MELFAS MMS114 and similar touchscreens have support for touch keys.
Enable support of them in the driver. The keycodes to emit can be
controlled by the linux,keycodes DT property.

Sidenote - the MAX_TOUCHKEYS value is set to 15, as that's the
maximum value that the ID field can contain. I don't have access
to any datasheets that could confirm or deny whether this is accurate.

Most downstream drivers I've been able to find only use up to 2 keys
(though I did find a driver that mentioned up to 4, but only 2 were
used). They don't have any checks for a maximum keycode value, it is
just extracted from the ID bits (0xf mask).

The drivers I've been able to find also don't use touch ID 0; I assume
that it is never used, so the keycodes provided in the DT start from
touch ID 1. I suppose this is in-line with the regular behavior
for touch IDs in touchscreen events, as there the provided touch ID
is always lowered by 1, which would cause an overflow if it was 0...
Just in case, we quietly return if the touch ID is set to 0 here.

The implementation of the linux,keycodes property handling code was
adapted from the msg2638 driver.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230714100424.29798-3-aweber.kernel@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174633.4058096-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Sync up with mainline to bring in updates to shared infrastructure.

Point the OF match table directly to the struct that describes the
device as opposed to an intermediate enum; doing so simplifies the
code and avoids a clang warning.

As part of this change, the I2C device ID table is removed, as the
device cannot probe without an OF node due to the unique nature of
the hardware's interrupt pin.

Fixes: f2ba47e65f3b ("Input: add support for Azoteq IQS7210A/7211A/E")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307131717.LtwApG0z-lkp@intel.com/
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZLA+cuciIeVcCvm6@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add support for the Azoteq IQS7210A/7211A/E family of trackpad/
touchscreen controllers.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZHVEeDlYyr69A59K@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>