linux.git/drivers/input, branch v3.0.48 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Input: i8042 - disable mux on Toshiba C850D 2012-10-02T16:47:27+00:00 Anisse Astier anisse@astier.eu 2012-09-19T18:10:48+00:00 31a4eee5e38205ba0b3c47d3e46c29d046cba89d commit 8669cf6793bb38307a30fb6b9565ddc8840ebd3f upstream. On Toshiba Satellite C850D, the touchpad and the keyboard might randomly not work at boot. Preventing MUX mode activation solves this issue. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8669cf6793bb38307a30fb6b9565ddc8840ebd3f upstream.

On Toshiba Satellite C850D, the touchpad and the keyboard might randomly
not work at boot. Preventing MUX mode activation solves this issue.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: i8042 - add Gigabyte T1005 series netbooks to noloop table 2012-09-14T17:00:51+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2012-08-22T04:57:15+00:00 cc75079d27fef238777bcc7db9e18044c59f9801 commit 7b125b94ca16b7e618c6241cb02c4c8060cea5e3 upstream. They all define their chassis type as "Other" and therefore are not categorized as "laptops" by the driver, which tries to perform AUX IRQ delivery test which fails and causes touchpad not working. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42620 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7b125b94ca16b7e618c6241cb02c4c8060cea5e3 upstream.

They all define their chassis type as "Other" and therefore are not
categorized as "laptops" by the driver, which tries to perform AUX IRQ
delivery test which fails and causes touchpad not working.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42620
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: wacom - Bamboo One 1024 pressure fix 2012-08-15T19:04:30+00:00 Chris Bagwell chris@cnpbagwell.com 2012-06-12T07:25:48+00:00 ab7029e676b83e54e639101e5ba96a07d7968cd5 commit 6dc463511d4a690f01a9248df3b384db717e0b1c upstream. Bamboo One's with ID of 0x6a and 0x6b were added with correct indication of 1024 pressure levels but the Graphire packet routine was only looking at 9 bits. Increased to 10 bits. This bug caused these devices to roll over to zero pressure at half way mark. The other devices using this routine only support 256 or 512 range and look to fix unused bits at zero. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Reported-by: Tushant Mirchandani <tushantin@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6dc463511d4a690f01a9248df3b384db717e0b1c upstream.

Bamboo One's with ID of 0x6a and 0x6b were added with correct
indication of 1024 pressure levels but the Graphire packet routine
was only looking at 9 bits.  Increased to 10 bits.

This bug caused these devices to roll over to zero pressure at half
way mark.

The other devices using this routine only support 256 or 512 range
and look to fix unused bits at zero.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Reported-by: Tushant Mirchandani <tushantin@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: xpad - add Andamiro Pump It Up pad 2012-07-19T15:58:21+00:00 Yuri Khan yurivkhan@gmail.com 2012-07-12T05:12:31+00:00 9c5d9de68ea54ae743b1cb36645c96b8fdcc1c8d commit e76b8ee25e034ab601b525abb95cea14aa167ed3 upstream. I couldn't find the vendor ID in any of the online databases, but this mat has a Pump It Up logo on the top side of the controller compartment, and a disclaimer stating that Andamiro will not be liable on the bottom. Signed-off-by: Yuri Khan <yurivkhan@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e76b8ee25e034ab601b525abb95cea14aa167ed3 upstream.

I couldn't find the vendor ID in any of the online databases, but this
mat has a Pump It Up logo on the top side of the controller compartment,
and a disclaimer stating that Andamiro will not be liable on the bottom.

Signed-off-by: Yuri Khan <yurivkhan@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: ALPS - fix touchpad detection when buttons are pressed 2012-03-12T17:33:00+00:00 Akio Idehara zbe64533@gmail.com 2012-03-08T19:49:15+00:00 85746fedf610d9d432bad65c760ef0e05b0b2140 commit 99c90ab31fad855b9da9dee3a5aa6c27f263e9d6 upstream. ALPS touchpad detection fails if some buttons of ALPS are pressed. The reason is that the "E6" query response byte is different from what is expected. This was tested on a Toshiba Portege R500. Signed-off-by: Akio Idehara <zbe64533@gmail.com> Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 99c90ab31fad855b9da9dee3a5aa6c27f263e9d6 upstream.

ALPS touchpad detection fails if some buttons of ALPS are pressed.
The reason is that the "E6" query response byte is different from
what is expected.

This was tested on a Toshiba Portege R500.

Signed-off-by: Akio Idehara <zbe64533@gmail.com>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: synaptics - fix touchpad not working after S2R on Vostro V13 2012-01-06T22:13:49+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2011-12-12T08:05:53+00:00 5cb6d2895e510f77514ef15c8f061621f09e4d78 commit 8521478f67e95ada4e87970c7b41e504c724b2cf upstream. Synaptics touchpads on several Dell laptops, particularly Vostro V13 systems, may not respond properly to PS/2 commands and queries immediately after resuming from suspend to RAM. This leads to unresponsive touchpad after suspend/resume cycle. Adding a 1-second delay after resetting the device allows touchpad to finish initializing (calibrating?) and start reacting properly. Reported-by: Daniel Manrique <daniel.manrique@canonical.com> Tested-by: Daniel Manrique <daniel.manrique@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 8521478f67e95ada4e87970c7b41e504c724b2cf upstream.

Synaptics touchpads on several Dell laptops, particularly Vostro V13
systems, may not respond properly to PS/2 commands and queries immediately
after resuming from suspend to RAM. This leads to unresponsive touchpad
after suspend/resume cycle.

Adding a 1-second delay after resetting the device allows touchpad to
finish initializing (calibrating?) and start reacting properly.

Reported-by: Daniel Manrique <daniel.manrique@canonical.com>
Tested-by: Daniel Manrique <daniel.manrique@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
input: pmic8xxx-pwrkey: Do not use mfd_get_data() 2011-07-05T08:38:43+00:00 Samuel Ortiz sameo@linux.intel.com 2011-06-08T09:06:30+00:00 63ef1124f1cb07836f232b8eaed1ae4c73899643 mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
mfd_get_data() has been removed from the MFD API.

Cc: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
input: pmic8xxx-keypad: Do not use mfd_get_data() 2011-07-05T08:38:43+00:00 Samuel Ortiz sameo@linux.intel.com 2011-06-08T09:03:23+00:00 1d08382a0e8a272fed9517a1b39ae6be634a77d5 mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
mfd_get_data() has been removed from the MFD API.

Cc: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2011-06-20T15:59:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-06-20T15:59:46+00:00 c01ad4081939f91ebd7277e8e731fd90ceb3e632 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sh_keysc - 8x8 MODE_6 fix Input: omap-keypad - add missing input_sync() Input: evdev - try to wake up readers only if we have full packet Input: properly assign return value of clamp() macro. 
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sh_keysc - 8x8 MODE_6 fix
  Input: omap-keypad - add missing input_sync()
  Input: evdev - try to wake up readers only if we have full packet
  Input: properly assign return value of clamp() macro.
Input: sh_keysc - 8x8 MODE_6 fix 2011-06-18T09:55:01+00:00 Magnus Damm damm@opensource.se 2011-06-18T09:51:52+00:00 cca23d0b5350c9ca0473625c3f5879422ba534a6 According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys. Bump up MAXKEYS to 64 too. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 
According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys.
Bump up MAXKEYS to 64 too.

Signed-off-by: Magnus Damm <damm@opensource.se>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>