linux.git/drivers/input, branch v3.13.3

xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4).

2014-02-13T21:55:28+00:00

commit 51c71a3bbaca868043cc45b3ad3786dd48a90235 upstream.

The user has the option of disabling the platform driver:
00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01)

which is used to unplug the emulated drivers (IDE, Realtek 8169, etc)
and allow the PV drivers to take over. If the user wishes
to disable that they can set:

  xen_platform_pci=0
  (in the guest config file)

or
  xen_emul_unplug=never
  (on the Linux command line)

except it does not work properly. The PV drivers still try to
load and since the Xen platform driver is not run - and it
has not initialized the grant tables, most of the PV drivers
stumble upon:

input: Xen Virtual Keyboard as /devices/virtual/input/input5
input: Xen Virtual Pointer as /devices/virtual/input/input6M
------------[ cut here ]------------
kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206!
invalid opcode: 0000 [#1] SMP
Modules linked in: xen_kbdfront(+) xenfs xen_privcmd
CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1
Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013
RIP: 0010:[]  [] get_free_entries+0x2e0/0x300
Call Trace:
 [] ? evdev_connect+0x1e3/0x240
 [] gnttab_grant_foreign_access+0x2e/0x70
 [] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront]
 [] xenkbd_probe+0x2f2/0x324 [xen_kbdfront]
 [] xenbus_dev_probe+0x77/0x130
 [] xenbus_frontend_dev_probe+0x47/0x50
 [] driver_probe_device+0x89/0x230
 [] __driver_attach+0x9b/0xa0
 [] ? driver_probe_device+0x230/0x230
 [] ? driver_probe_device+0x230/0x230
 [] bus_for_each_dev+0x8c/0xb0
 [] driver_attach+0x19/0x20
 [] bus_add_driver+0x1a0/0x220
 [] driver_register+0x5f/0xf0
 [] xenbus_register_driver_common+0x15/0x20
 [] xenbus_register_frontend+0x23/0x40
 [] ? 0xffffffffa0014fff
 [] xenkbd_init+0x2b/0x1000 [xen_kbdfront]
 [] do_one_initcall+0x49/0x170

.. snip..

which is hardly nice. This patch fixes this by having each
PV driver check for:
 - if running in PV, then it is fine to execute (as that is their
   native environment).
 - if running in HVM, check if user wanted 'xen_emul_unplug=never',
   in which case bail out and don't load any PV drivers.
 - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci)
   does not exist, then bail out and not load PV drivers.
 - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks',
   then bail out for all PV devices _except_ the block one.
   Ditto for the network one ('nics').
 - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary'
   then load block PV driver, and also setup the legacy IDE paths.
   In (v3) make it actually load PV drivers.

Reported-by: Sander Eikelenboom 
Reported-and-Tested-by: Fabio Fantoni 
Signed-off-by: Konrad Rzeszutek Wilk 
[v2: Add extra logic to handle the myrid ways 'xen_emul_unplug'
can be used per Ian and Stefano suggestion]
[v3: Make the unnecessary case work properly]
[v4: s/disks/ide-disks/ spotted by Fabio]
Reviewed-by: Stefano Stabellini 
Acked-by: Bjorn Helgaas  [for PCI parts]
Signed-off-by: Greg Kroah-Hartman

Input: allocate absinfo data when setting ABS capability

2013-12-31T18:53:19+00:00

We need to make sure we allocate absinfo data when we are setting one of
EV_ABS/ABS_XXX capabilities, otherwise we may bomb when we try to emit this
event.

Rested-by: Paul Cercueil 
Signed-off-by: Dmitry Torokhov

Input: zforce - fix possible driver hang during suspend

2013-12-15T10:53:13+00:00

handle_level_irq masks the interrupt before handling it, and only
unmasks it after the handler is finished. So when a touch event
happens after threads are suspended, but before the system is fully asleep
the irq handler tries to wakeup the thread which will only happen on the
next resume, resulting in the wakeup event never being sent and the driver
not being able to wake the system from sleep due to the masked irq.

Therefore move the wakeup_event to a small non-threaded handler.

Signed-off-by: Heiko Stuebner 
Signed-off-by: Dmitry Torokhov

Input: adxl34x - Fix bug in definition of ADXL346_2D_ORIENT

2013-12-10T06:23:31+00:00

Coverity report pointet out by Dmitry

Reported-by: Dmitry Torokhov 
Signed-off-by: Michael Hennerich 
Signed-off-by: Dmitry Torokhov

Input: serio - fix sysfs layout

2013-12-10T06:23:26+00:00

Restore previous layout of sysfs attributes that was broken by commit
3778a2129bcce84f684cc0017ed20d2524afd289 (input: serio: remove bus usage of
dev_attrs) which moved all serio device attributes into 'id' group, when
only 'type', 'proto', 'id', and 'extra' should be in 'id' group and the
rest of attributes should be attached directly to the device.

Reported-by: Thomas Hellstrom 
Tested-by: Thomas Hellstrom 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Dmitry Torokhov

Merge tag 'v3.13-rc3' into for-linus

2013-12-10T06:22:40+00:00

Merging with the mainline to sync up on changes to serio core.

Input: ALPS - add support for DualPoint device on Dell XT2 model

2013-12-05T20:50:18+00:00

The device uses special MPU controller that necessitates the new
initialization sequence for the device. We also define a new protocol for
the trackpad that allows reporting better resolution than older V2
protocol.

Signed-off-by: Yunkang Tang 
Signed-off-by: Dmitry Torokhov

Input: elantech - add support for newer (August 2013) devices

2013-12-05T20:49:49+00:00

Added detection for newer Elantech touchpads, so that kernel doesn't
fall-back to default PS/2 driver. Supports touchpads released after
~August 2013.  Fixes bug:
https://lists.launchpad.net/kernel-packages/msg18481.html

Tested on an Acer Aspire S7-392-6302.

Signed-off by: Matt Walker 
Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - separate report and transmit buffer size handling

2013-12-02T06:18:04+00:00

This patch supports the separate handling of the USB transfer buffer length
and the length of the buffer used for multi packet support. For devices
supporting multiple report or diagnostic packets, the USB transfer size is now
limited to the USB endpoints wMaxPacketSize - otherwise it defaults to the
configured report packet size as before.

This fixes an issue where event reporting can be delayed for an arbitrary
time for multi packet devices. For instance the report size for eGalax devices
is defined to the 16 byte maximum diagnostic packet size as opposed to the 5
byte report packet size. In case the driver requests 16 byte from the USB
interrupt endpoint, the USB host controller driver needs to split up the
request into 2 accesses according to the endpoints wMaxPacketSize of 8 byte.
When the first transfer is answered by the eGalax device with not less than
the full 8 byte requested, the host controller has got no way of knowing
whether the touch controller has got additional data queued and will issue
the second transfer. If per example a liftoff event finishes at such a
wMaxPacketSize boundary, the data will not be available to the usbtouch driver
until a further event is triggered and transfered to the host. From user
perspective the BTN_TOUCH release event in this case is stuck until the next
touch down event.

Signed-off-by: Christian Engelmayer 
Signed-off-by: Dmitry Torokhov

Input: sur40 - suppress false uninitialized variable warning

2013-12-02T06:17:35+00:00

We will never use packet_id before initializing it as we start with
"need_blobs == -1" and will set packet_id there.

Also use le32_to_cpu when fetching header->packet_id.

Signed-off-by: Dmitry Torokhov