linux.git/drivers/input, branch v4.19.192 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state 2021-05-22T08:59:48+00:00 Hans de Goede hdegoede@redhat.com 2021-04-10T05:29:49+00:00 10a6d9f8f73e48d624c7803aaf86214634d324b6 [ Upstream commit e479187748a8f151a85116a7091c599b121fdea5 ] Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e479187748a8f151a85116a7091c599b121fdea5 ]

Some buggy BIOS-es bring up the touchscreen-controller in a stuck
state where it blocks the I2C bus. Specifically this happens on
the Jumper EZpad 7 tablet model.

After much poking at this problem I have found that the following steps
are necessary to unstuck the chip / bus:

1. Turn off the Silead chip.
2. Try to do an I2C transfer with the chip, this will fail in response to
   which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck
   the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first
   drop the chip of the bus by turning it off.
3. Turn the chip back on.

On the x86/ACPI systems were this problem is seen, step 1. and 3. require
making ACPI calls and dealing with ACPI Power Resources. This commit adds
a workaround which runtime-suspends the chip to turn it off, leaving it up
to the ACPI subsystem to deal with all the ACPI specific details.

There is no good way to detect this bug, so the workaround gets activated
by a new "silead,stuck-controller-bug" boolean device-property. Since this
is only used on x86/ACPI, this will be set by model specific device-props
set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new
device-property is not documented in the DT-bindings.

Dmesg will contain the following messages on systems where the workaround
is activated:

[   54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error
[   55.373593] i2c_designware 808622C1:04: controller timed out
[   55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices 2021-05-22T08:59:48+00:00 Hans de Goede hdegoede@redhat.com 2021-04-10T05:29:07+00:00 3d54c18610ca48af94b66fb7af07915525ac0ffb [ Upstream commit 65299e8bfb24774e6340e93ae49f6626598917c8 ] Several users have been reporting that elants_i2c gives several errors during probe and that their touchscreen does not work on their Lenovo AMD based laptops with a touchscreen with a ELAN0001 ACPI hardware-id: [ 0.550596] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vcc33 not found, using dummy regulator [ 0.551836] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vccio not found, using dummy regulator [ 0.560932] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.562427] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.595925] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.597974] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.621893] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.622504] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.632650] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (4d 61 69 6e): -121 [ 0.634256] elants_i2c i2c-ELAN0001:00: boot failed: -121 [ 0.699212] elants_i2c i2c-ELAN0001:00: invalid 'hello' packet: 00 00 ff ff [ 1.630506] elants_i2c i2c-ELAN0001:00: Failed to read fw id: -121 [ 1.645508] elants_i2c i2c-ELAN0001:00: unknown packet 00 00 ff ff Despite these errors, the elants_i2c driver stays bound to the device (it returns 0 from its probe method despite the errors), blocking the i2c-hid driver from binding. Manually unbinding the elants_i2c driver and binding the i2c-hid driver makes the touchscreen work. Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid compatiblity-id strings and if it has the I2C-HID spec's DSM to get the HID descriptor address, If it has both then make elants_i2c not bind, so that the i2c-hid driver can bind. This assumes that non of the (older) elan touchscreens which actually need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id + DSM in their ACPI-fwnodes. If some of them actually do have this false advertising, then this change may lead to regressions. While at it also drop the unnecessary DEVICE_NAME prefixing of the "I2C check functionality error", dev_err already outputs the driver-name. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207759 Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202756.16830-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 65299e8bfb24774e6340e93ae49f6626598917c8 ]

Several users have been reporting that elants_i2c gives several errors
during probe and that their touchscreen does not work on their Lenovo AMD
based laptops with a touchscreen with a ELAN0001 ACPI hardware-id:

[    0.550596] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vcc33 not found, using dummy regulator
[    0.551836] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vccio not found, using dummy regulator
[    0.560932] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121
[    0.562427] elants_i2c i2c-ELAN0001:00: software reset failed: -121
[    0.595925] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121
[    0.597974] elants_i2c i2c-ELAN0001:00: software reset failed: -121
[    0.621893] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121
[    0.622504] elants_i2c i2c-ELAN0001:00: software reset failed: -121
[    0.632650] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (4d 61 69 6e): -121
[    0.634256] elants_i2c i2c-ELAN0001:00: boot failed: -121
[    0.699212] elants_i2c i2c-ELAN0001:00: invalid 'hello' packet: 00 00 ff ff
[    1.630506] elants_i2c i2c-ELAN0001:00: Failed to read fw id: -121
[    1.645508] elants_i2c i2c-ELAN0001:00: unknown packet 00 00 ff ff

Despite these errors, the elants_i2c driver stays bound to the device
(it returns 0 from its probe method despite the errors), blocking the
i2c-hid driver from binding.

Manually unbinding the elants_i2c driver and binding the i2c-hid driver
makes the touchscreen work.

Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid
compatiblity-id strings and if it has the I2C-HID spec's DSM to get the
HID descriptor address, If it has both then make elants_i2c not bind,
so that the i2c-hid driver can bind.

This assumes that non of the (older) elan touchscreens which actually
need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id
+ DSM in their ACPI-fwnodes. If some of them actually do have this
false advertising, then this change may lead to regressions.

While at it also drop the unnecessary DEVICE_NAME prefixing of the
"I2C check functionality error", dev_err already outputs the driver-name.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207759
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210405202756.16830-1-hdegoede@redhat.com

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: i8042 - fix Pegatron C15B ID entry 2021-04-28T11:16:50+00:00 Arnd Bergmann arnd@arndb.de 2021-03-23T16:56:34+00:00 0113e59c46a134e241f271a3039bc572d94cbcbe commit daa58c8eec0a65ac8e2e77ff3ea8a233d8eec954 upstream. The Zenbook Flip entry that was added overwrites a previous one because of a typo: In file included from drivers/input/serio/i8042.h:23, from drivers/input/serio/i8042.c:131: drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init] 591 | .matches = { | ^ drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches') Add the missing separator between the two. Fixes: b5d6e7ab7fe7 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com> Link: https://lore.kernel.org/r/20210323130623.2302402-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit daa58c8eec0a65ac8e2e77ff3ea8a233d8eec954 upstream.

The Zenbook Flip entry that was added overwrites a previous one
because of a typo:

In file included from drivers/input/serio/i8042.h:23,
                 from drivers/input/serio/i8042.c:131:
drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init]
  591 |                 .matches = {
      |                            ^
drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches')

Add the missing separator between the two.

Fixes: b5d6e7ab7fe7 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Link: https://lore.kernel.org/r/20210323130623.2302402-1-arnd@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: s6sy761 - fix coordinate read bit shift 2021-04-28T11:16:50+00:00 Caleb Connolly caleb@connolly.tech 2021-03-07T23:12:22+00:00 1b97eb664fafdf37292d34dd2a28081cb9b069ac commit 30b3f68715595dee7fe4d9bd91a2252c3becdf0a upstream. The touch coordinate register contains the following: byte 3 byte 2 byte 1 +--------+--------+ +-----------------+ +-----------------+ | | | | | | | | X[3:0] | Y[3:0] | | Y[11:4] | | X[11:4] | | | | | | | | +--------+--------+ +-----------------+ +-----------------+ Bytes 2 and 1 need to be shifted left by 4 bits, the least significant nibble of each is stored in byte 3. Currently they are only being shifted by 3 causing the reported coordinates to be incorrect. This matches downstream examples, and has been confirmed on my device (OnePlus 7 Pro). Fixes: 0145a7141e59 ("Input: add support for the Samsung S6SY761 touchscreen") Signed-off-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20210305185710.225168-1-caleb@connolly.tech Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 30b3f68715595dee7fe4d9bd91a2252c3becdf0a upstream.

The touch coordinate register contains the following:

        byte 3             byte 2             byte 1
+--------+--------+ +-----------------+ +-----------------+
|        |        | |                 | |                 |
| X[3:0] | Y[3:0] | |     Y[11:4]     | |     X[11:4]     |
|        |        | |                 | |                 |
+--------+--------+ +-----------------+ +-----------------+

Bytes 2 and 1 need to be shifted left by 4 bits, the least significant
nibble of each is stored in byte 3. Currently they are only
being shifted by 3 causing the reported coordinates to be incorrect.

This matches downstream examples, and has been confirmed on my
device (OnePlus 7 Pro).

Fixes: 0145a7141e59 ("Input: add support for the Samsung S6SY761 touchscreen")
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://lore.kernel.org/r/20210305185710.225168-1-caleb@connolly.tech
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: nspire-keypad - enable interrupts only when opened 2021-04-28T11:16:48+00:00 Fabian Vogt fabian@ritter-vogt.de 2021-03-23T17:45:55+00:00 8525c7489e165f53ea7a200f482eb7779fe20eef [ Upstream commit 69d5ff3e9e51e23d5d81bf48480aa5671be67a71 ] The driver registers an interrupt handler in _probe, but didn't configure them until later when the _open function is called. In between, the keypad can fire an IRQ due to touchpad activity, which the handler ignores. This causes the kernel to disable the interrupt, blocking the keypad from working. Fix this by disabling interrupts before registering the handler. Additionally, disable them in _close, so that they're only enabled while open. Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support") Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 69d5ff3e9e51e23d5d81bf48480aa5671be67a71 ]

The driver registers an interrupt handler in _probe, but didn't configure
them until later when the _open function is called. In between, the keypad
can fire an IRQ due to touchpad activity, which the handler ignores. This
causes the kernel to disable the interrupt, blocking the keypad from
working.

Fix this by disabling interrupts before registering the handler.
Additionally, disable them in _close, so that they're only enabled while
open.

Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: i8042 - add ASUS Zenbook Flip to noselftest list 2021-03-04T08:39:51+00:00 Marcos Paulo de Souza mpdesouza@suse.com 2021-02-19T18:37:13+00:00 18bd13e265ce06ad78c16e235f03b3249c2f3b49 commit b5d6e7ab7fe7d186878142e9fc1a05e4c3b65eb9 upstream. After commit 77b425399f6d ("Input: i8042 - use chassis info to skip selftest on Asus laptops"), all modern Asus laptops have the i8042 selftest disabled. It has done by using chassys type "10" (laptop). The Asus Zenbook Flip suffers from similar suspend/resume issues, but it _sometimes_ work and sometimes it doesn't. Setting noselftest makes it work reliably. In this case, we need to add chassis type "31" (convertible) in order to avoid selftest in this device. Reported-by: Ludvig Norgren Guldhag <ludvigng@gmail.com> Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Link: https://lore.kernel.org/r/20210219164638.761-1-mpdesouza@suse.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b5d6e7ab7fe7d186878142e9fc1a05e4c3b65eb9 upstream.

After commit 77b425399f6d ("Input: i8042 - use chassis info to skip
selftest on Asus laptops"), all modern Asus laptops have the i8042
selftest disabled. It has done by using chassys type "10" (laptop).

The Asus Zenbook Flip suffers from similar suspend/resume issues, but
it _sometimes_ work and sometimes it doesn't. Setting noselftest makes
it work reliably. In this case, we need to add chassis type "31"
(convertible) in order to avoid selftest in this device.

Reported-by: Ludvig Norgren Guldhag <ludvigng@gmail.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Link: https://lore.kernel.org/r/20210219164638.761-1-mpdesouza@suse.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: joydev - prevent potential read overflow in ioctl 2021-03-04T08:39:51+00:00 Dan Carpenter dan.carpenter@oracle.com 2021-02-17T20:21:10+00:00 88438fdeeffe11dcb05c2dd0ddd22cb6e3f024b4 commit 182d679b2298d62bf42bb14b12a8067b8e17b617 upstream. The problem here is that "len" might be less than "joydev->nabs" so the loops which verfy abspam[i] and keypam[] might read beyond the buffer. Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YCyzR8WvFRw4HWw6@mwanda [dtor: additional check for len being even in joydev_handle_JSIOCSBTNMAP] Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 182d679b2298d62bf42bb14b12a8067b8e17b617 upstream.

The problem here is that "len" might be less than "joydev->nabs" so the
loops which verfy abspam[i] and keypam[] might read beyond the buffer.

Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YCyzR8WvFRw4HWw6@mwanda
[dtor: additional check for len being even in joydev_handle_JSIOCSBTNMAP]
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S 2021-03-04T08:39:51+00:00 Olivier Crête olivier.crete@ocrete.ca 2021-02-05T19:59:08+00:00 3096bea3d255eeffbcd55c375b3662c071278567 commit 42ffcd1dba1796bcda386eb6f260df9fc23c90af upstream. Signed-off-by: Olivier Crête <olivier.crete@ocrete.ca> Link: https://lore.kernel.org/r/20210204005318.615647-1-olivier.crete@collabora.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 42ffcd1dba1796bcda386eb6f260df9fc23c90af upstream.

Signed-off-by: Olivier Crête <olivier.crete@ocrete.ca>
Link: https://lore.kernel.org/r/20210204005318.615647-1-olivier.crete@collabora.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: raydium_ts_i2c - do not send zero length 2021-03-04T08:39:51+00:00 jeffrey.lin jeffrey.lin@rad-ic.com 2020-12-15T18:50:12+00:00 1861f63e3b484aa4a577685814eafdb8a0cb450d commit fafd320ae51b9c72d371585b2501f86640ea7b7d upstream. Add default write command package to prevent i2c quirk error of zero data length as Raydium touch firmware update is executed. Signed-off-by: jeffrey.lin <jeffrey.lin@rad-ic.com> Link: https://lore.kernel.org/r/1608031217-7247-1-git-send-email-jeffrey.lin@raydium.corp-partner.google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fafd320ae51b9c72d371585b2501f86640ea7b7d upstream.

Add default write command package to prevent i2c quirk error of zero
data length as Raydium touch firmware update is executed.

Signed-off-by: jeffrey.lin <jeffrey.lin@rad-ic.com>
Link: https://lore.kernel.org/r/1608031217-7247-1-git-send-email-jeffrey.lin@raydium.corp-partner.google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: elo - fix an error code in elo_connect() 2021-03-04T08:39:47+00:00 Dan Carpenter dan.carpenter@oracle.com 2021-02-17T04:29:05+00:00 920eb9f8a270b8d4dd0c4c78d9d64ea85e622759 [ Upstream commit 0958351e93fa0ac142f6dd8bd844441594f30a57 ] If elo_setup_10() fails then this should return an error code instead of success. Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKFd5CvDu+jVmfW@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0958351e93fa0ac142f6dd8bd844441594f30a57 ]

If elo_setup_10() fails then this should return an error code instead
of success.

Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YBKFd5CvDu+jVmfW@mwanda
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>