linux.git/drivers/input, branch v5.4.164

Input: i8042 - Add quirk for Fujitsu Lifebook T725

2021-11-17T08:48:17+00:00

commit 16e28abb7290c4ca3b3a0f333ba067f34bb18c86 upstream.

Fujitsu Lifebook T725 laptop requires, like a few other similar
models, the nomux and notimeout options to probe the touchpad
properly.  This patch adds the corresponding quirk entries.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980
Tested-by: Neal Gompa 
Cc: 
Signed-off-by: Takashi Iwai 
Link: https://lore.kernel.org/r/20211103070019.13374-1-tiwai@suse.de
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: elantench - fix misreporting trackpoint coordinates

2021-11-17T08:48:16+00:00

commit be896bd3b72b44126c55768f14c22a8729b0992e upstream.

Some firmwares occasionally report bogus data from trackpoint, with X or Y
displacement being too large (outside of [-127, 127] range). Let's drop such
packets so that we do not generate jumps.

Signed-off-by: Phoenix Huang 
Tested-by: Yufei Du 
Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: iforce - fix control-message timeout

2021-11-17T08:48:16+00:00

commit 744d0090a5f6dfa4c81b53402ccdf08313100429 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB")
Signed-off-by: Johan Hovold 
Cc: stable@vger.kernel.org      # 5.3
Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: snvs_pwrkey - add clk handling

2021-10-27T07:54:29+00:00

[ Upstream commit d997cc1715df7b6c3df798881fb9941acf0079f8 ]

On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an
associated clock. Accessing the registers requires that this clock is
enabled. Binding the driver on at least i.MX7S and i.MX8MP while not
having the clock enabled results in a complete hang of the machine.
(This usually only happens if snvs_pwrkey is built as a module and the
rtc-snvs driver isn't already bound because at bootup the required clk
is on and only gets disabled when the clk framework disables unused clks
late during boot.)

This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add
snvs clock to pwrkey").

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: xpad - add support for another USB ID of Nacon GC-100

2021-10-20T09:40:14+00:00

commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 upstream.

The Nacon GX100XF is already mapped, but it seems there is a Nacon
GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other
colours exist) with a different USB ID when in XInput mode.

Signed-off-by: Michael Cullen 
Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: hideep - fix the uninitialized use in hideep_nvm_unlock()

2021-07-20T14:10:45+00:00

[ Upstream commit cac7100d4c51c04979dacdfe6c9a5e400d3f0a27 ]

Inside function hideep_nvm_unlock(), variable "unmask_code" could
be uninitialized if hideep_pgm_r_reg() returns error, however, it
is used in the later if statement after an "and" operation, which
is potentially unsafe.

Signed-off-by: Yizhuo 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: hil_kbd - fix error return code in hil_dev_connect()

2021-07-14T14:53:40+00:00

[ Upstream commit d9b576917a1d0efa293801a264150a1b37691617 ]

Return error code -EINVAL rather than '0' when the combo devices are not
supported.

Fixes: fa71c605c2bb ("Input: combine hil_kbd and hil_ptr drivers")
Reported-by: Hulk Robot 
Signed-off-by: Zhen Lei 
Link: https://lore.kernel.org/r/20210515030053.6824-1-thunder.leizhen@huawei.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

m68k: atari: Fix ATARI_KBD_CORE kconfig unmet dependency warning

2021-07-14T14:53:22+00:00

[ Upstream commit c1367ee016e3550745315fb9a2dd1e4ce02cdcf6 ]

Since the code for ATARI_KBD_CORE does not use drivers/input/keyboard/
code, just move ATARI_KBD_CORE to arch/m68k/Kconfig.machine to remove
the dependency on INPUT_KEYBOARD.

Removes this kconfig warning:

    WARNING: unmet direct dependencies detected for ATARI_KBD_CORE
      Depends on [n]: !UML && INPUT [=y] && INPUT_KEYBOARD [=n]
      Selected by [y]:
      - MOUSE_ATARI [=y] && !UML && INPUT [=y] && INPUT_MOUSE [=y] && ATARI [=y]

Fixes: c04cb856e20a ("m68k: Atari keyboard and mouse support.")
Signed-off-by: Randy Dunlap 
Suggested-by: Geert Uytterhoeven 
Suggested-by: Michael Schmitz 
Acked-by: Dmitry Torokhov 
Link: https://lore.kernel.org/r/20210527001251.8529-1-rdunlap@infradead.org
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Sasha Levin

Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl

2021-07-14T14:53:02+00:00

commit f8f84af5da9ee04ef1d271528656dac42a090d00 upstream.

Even though we validate user-provided inputs we then traverse past
validated data when applying the new map. The issue was originally
discovered by Murray McAllister with this simple POC (if the following
is executed by an unprivileged user it will instantly panic the system):

int main(void) {
	int fd, ret;
	unsigned int buffer[10000];

	fd = open("/dev/input/js0", O_RDONLY);
	if (fd == -1)
		printf("Error opening file\n");

	ret = ioctl(fd, JSIOCSBTNMAP & ~IOCSIZE_MASK, &buffer);
	printf("%d\n", ret);
}

The solution is to traverse internal buffer which is guaranteed to only
contain valid date when constructing the map.

Fixes: 182d679b2298 ("Input: joydev - prevent potential read overflow in ioctl")
Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones")
Reported-by: Murray McAllister 
Suggested-by: Linus Torvalds 
Signed-off-by: Alexander Larkin 
Link: https://lore.kernel.org/r/20210620120030.1513655-1-avlarkin82@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: usbtouchscreen - fix control-request directions

2021-07-14T14:53:00+00:00

commit 41e81022a04a0294c55cfa7e366bc14b9634c66e upstream.

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Fix the four control requests which erroneously used usb_rcvctrlpipe().

Fixes: 1d3e20236d7a ("[PATCH] USB: usbtouchscreen: unified USB touchscreen driver")
Fixes: 24ced062a296 ("usbtouchscreen: add support for DMC TSC-10/25 devices")
Fixes: 9e3b25837a20 ("Input: usbtouchscreen - add support for e2i touchscreen controller")
Signed-off-by: Johan Hovold 
Cc: stable@vger.kernel.org      # 2.6.17
Link: https://lore.kernel.org/r/20210524092048.4443-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman