linux.git/drivers/input, branch v6.6.18

Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID

2024-02-16T18:10:55+00:00

commit 683cd8259a9b883a51973511f860976db2550a6e upstream.

After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models
has stopped working after a suspend/resume.

The problem appears to be that atkbd_probe() fails when called
from atkbd_reconnect() on resume, which on systems where
ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS
failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was
skipped is weird, but apparently that is what is happening.

Fix this by also skipping ATKBD_CMD_SETLEDS when skipping
ATKBD_CMD_GETID.

Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Reported-by: Paul Menzel 
Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517
Tested-by: Paul Menzel 
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU

2024-02-16T18:10:55+00:00

commit a60e6c3918d20848906ffcdfcf72ca6a8cfbcf2e upstream.

When closing the laptop lid with an external screen connected, the mouse
pointer has a constant movement to the lower right corner. Opening the
lid again stops this movement, but after that the touchpad does no longer
register clicks.

The touchpad is connected both via i2c-hid and PS/2, the predecessor of
this device (NS70MU) has the same layout in this regard and also strange
behaviour caused by the psmouse and the i2c-hid driver fighting over
touchpad control. This fix is reusing the same workaround by just
disabling the PS/2 aux port, that is only used by the touchpad, to give the
i2c-hid driver the lone control over the touchpad.

v2: Rebased on current master

Signed-off-by: Werner Sembach 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231205163602.16106-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: atkbd - use ab83 as id when skipping the getid command

2024-01-25T23:35:41+00:00

commit 58f65f9db7e0de366a5a115c2e2c0703858bba69 upstream.

Barnabás reported that the change to skip the getid command
when the controller is in translated mode on laptops caused
the Version field of his "AT Translated Set 2 keyboard"
input device to change from ab83 to abba, breaking a custom
hwdb entry for this keyboard.

Use the standard ab83 id for keyboards when getid is skipped
(rather then that getid fails) to avoid reporting a different
Version to userspace then before skipping the getid.

Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Reported-by: Barnabás Pőcze 
Closes: https://lore.kernel.org/linux-input/W1ydwoG2fYv85Z3C3yfDOJcVpilEvGge6UGa9kZh8zI2-qkHXp7WLnl2hSkFz63j-c7WupUWI5TLL6n7Lt8DjRuU-yJBwLYWrreb1hbnd6A=@protonmail.com/
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20240116204325.7719-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: xpad - add Razer Wolverine V2 support

2024-01-20T10:51:44+00:00

[ Upstream commit c3d1610345b79cbe29ef6ca04a4780eff0d360c7 ]

Add the VID and PID of Razer Wolverine V2 to xpad_device.

Signed-off-by: Luca Weiss 
Link: https://lore.kernel.org/r/20231125-razer-wolverine-v2-v1-1-979fe9f9288e@z3ntu.xyz
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: i8042 - add nomux quirk for Acer P459-G2-M

2024-01-20T10:51:44+00:00

[ Upstream commit 335fe00319e030d481a54d5e0e68d50c5e672c0e ]

After the laptop lid is opened, and the device resumes from S3 deep
sleep, if the user presses a keyboard key while the screen is still black,
the mouse and keyboard become unusable.

Enabling this quirk prevents this behavior from occurring.

Signed-off-by: Esther Shimanovich 
Link: https://lore.kernel.org/r/20231130195615.v2.1.Ibe78a9df97ecd18dc227a5cff67d3029631d9c11@changeid
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: atkbd - skip ATKBD_CMD_GETID in translated mode

2024-01-20T10:51:44+00:00

[ Upstream commit 936e4d49ecbc8c404790504386e1422b599dec39 ]

There have been multiple reports of keyboard issues on recent laptop models
which can be worked around by setting i8042.dumbkbd, with the downside
being this breaks the capslock LED.

It seems that these issues are caused by recent laptops getting confused by
ATKBD_CMD_GETID. Rather then adding and endless growing list of quirks for
this, just skip ATKBD_CMD_GETID alltogether on laptops in translated mode.

The main goal of sending ATKBD_CMD_GETID is to skip binding to ps/2
mice/touchpads and those are never used in translated mode.

Examples of laptop models which benefit from skipping ATKBD_CMD_GETID:

* "HP Laptop 15s-fq2xxx", "HP laptop 15s-fq4xxx" and "HP Laptop 15-dy2xxx"
  models the kbd stops working for the first 2 - 5 minutes after boot
  (waiting for EC watchdog reset?)

* On "HP Spectre x360 13-aw2xxx" atkbd fails to probe the keyboard

* At least 9 different Lenovo models have issues with ATKBD_CMD_GETID, see:
  https://github.com/yescallop/atkbd-nogetid

This has been tested on:

1. A MSI B550M PRO-VDH WIFI desktop, where the i8042 controller is not
   in translated mode when no keyboard is plugged in and with a ps/2 kbd
   a "AT Translated Set 2 keyboard" /dev/input/event# node shows up

2. A Lenovo ThinkPad X1 Yoga gen 8 (always has a translated set 2 keyboard)

Reported-by: Shang Ye 
Closes: https://lore.kernel.org/linux-input/886D6167733841AE+20231017135318.11142-1-yesh25@mail2.sysu.edu.cn/
Closes: https://github.com/yescallop/atkbd-nogetid
Reported-by: gurevitch 
Closes: https://lore.kernel.org/linux-input/2iAJTwqZV6lQs26cTb38RNYqxvsink6SRmrZ5h0cBUSuf9NT0tZTsf9fEAbbto2maavHJEOP8GA1evlKa6xjKOsaskDhtJWxjcnrgPigzVo=@gurevit.ch/
Reported-by: Egor Ignatov 
Closes: https://lore.kernel.org/all/20210609073333.8425-1-egori@altlinux.org/
Reported-by: Anton Zhilyaev 
Closes: https://lore.kernel.org/linux-input/20210201160336.16008-1-anton@cpp.in/
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2086156
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20231115174625.7462-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: psmouse - enable Synaptics InterTouch for ThinkPad L14 G1

2024-01-20T10:51:43+00:00

[ Upstream commit c1f342f35f820b33390571293498c3e2e9bc77ec ]

Observed on dmesg of my laptop I see the following
output:

[   19.898700] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694]
[   19.936057] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
[   19.936076] psmouse serio1: synaptics: Your touchpad (PNP: LEN0411 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[   20.008901] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.32, id: 0x1e2a1, caps: 0xf014a3/0x940300/0x12e800/0x500000, board id: 3471, fw id: 2909640
[   20.008925] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[   20.053344] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   20.397608] mousedev: PS/2 mouse device common for all mice

This patch will add its pnp id to the smbus list to
produce the setup of intertouch for the device.

Signed-off-by: José Pekkarinen 
Link: https://lore.kernel.org/r/20231114063607.71772-1-jose.pekkarinen@foxhound.fi
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: soc_button_array - add mapping for airplane mode button

2024-01-01T12:42:41+00:00

commit ea3715941a9b7d816a1e9096ac0577900af2a69e upstream.

This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.

While it is physically a key it behaves more like a switch, sending a key
down on first press and a key up on 2nd press. Therefor the switch event
is used here. Besides this behaviour it uses the HID usage-id 0xc6
(Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but
since neither 0xc6 nor 0xc8 are currently implemented at all in
soc_button_array this not to standard behaviour is not put behind a quirk
for the moment.

Signed-off-by: Christoffer Sandberg 
Signed-off-by: Werner Sembach 
Link: https://lore.kernel.org/r/20231215171718.80229-1-wse@tuxedocomputers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: ipaq-micro-keys - add error handling for devm_kmemdup

2024-01-01T12:42:36+00:00

[ Upstream commit 59b6a747e2d39227ac2325c5e29d6ab3bb070c2a ]

Check the return value of i2c_add_adapter. Static analysis revealed that
the function did not properly handle potential failures of
i2c_add_adapter, which could lead to partial initialization of the I2C
adapter and unstable operation.

Signed-off-by: Haoran Liu 
Link: https://lore.kernel.org/r/20231203164653.38983-1-liuhaoran14@163.com
Fixes: d7535ffa427b ("Input: driver for microcontroller keys on the iPaq h3xxx")
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()

2023-11-20T10:59:34+00:00

[ Upstream commit eb988e46da2e4eae89f5337e047ce372fe33d5b1 ]

The put_device() calls rmi_release_function() which frees "fn" so the
dereference on the next line "fn->num_of_irqs" is a use after free.
Move the put_device() to the end to fix this.

Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/706efd36-7561-42f3-adfa-dd1d0bd4f5a1@moroto.mountain
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin