linux.git/drivers/media, branch v4.1.29

[media] v4l: vsp1: Set the SRU CTRL0 register when starting the stream

2016-07-11T03:07:08+00:00

[ Upstream commit f6acfcdc5b8cdc9ddd53a459361820b9efe958c4 ]

Commit 58f896d859ce ("[media] v4l: vsp1: sru: Make the intensity
controllable during streaming") refactored the stream start code and
removed the SRU CTRL0 register write by mistake. Add it back.

Fixes: 58f896d859ce ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming")

Signed-off-by: Laurent Pinchart 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

[media] coda: fix error path in case of missing pdata on non-DT platform

2016-07-11T03:07:07+00:00

[ Upstream commit bc717d5e92c8c079280eb4acbe335c6f25041aa2 ]

If we bail out this early, v4l2_device_register() has not been called
yet, so no need to call v4l2_device_unregister().

Fixes: b7bd660a51f0 ("[media] coda: Call v4l2_device_unregister() from a single location")

Reported-by: Michael Olbrich 
Signed-off-by: Philipp Zabel 
Reviewed-by: Fabio Estevam 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

uvc: Forward compat ioctls to their handlers directly

2016-06-18T20:47:33+00:00

[ Upstream commit a44323e2a8f342848bb77e8e04fcd85fcb91b3b4 ]

The current code goes through a lot of indirection just to call a
known handler.  Simplify it: just call the handlers directly.

Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski 
Signed-off-by: Sasha Levin

[media] media: v4l2-compat-ioctl32: fix missing reserved field copy in put_v4l2_create32

2016-06-03T23:15:26+00:00

[ Upstream commit baf43c6eace43868e490f18560287fa3481b2159 ]

In v4l2-compliance utility, test VIDIOC_CREATE_BUFS will check whether reserved
filed of v4l2_create_buffers filled with zero
Reserved field is filled with zero in v4l_create_bufs.
This patch copy reserved field of v4l2_create_buffer from kernel space to user
space

Signed-off-by: Tiffany Lin 
Signed-off-by: Hans Verkuil 
Cc:       # for v3.19 and up
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

[media] au0828: Fix dev_state handling

2016-04-20T05:03:43+00:00

[ Upstream commit e8e3039f5b941f7825d335f8ca11c12a8104db11 ]

The au0828 dev_state is actually a bit mask. It should not be
checking with "==" but, instead, with a logic and. There are some
places where it was doing it wrong.

Fix that by replacing the dev_state set/clear/test with the
bitops.

As reviewed by Shuah:
	"Looks good. Tested running bind/unbind au0828 loop for 1000 times.
	Didn't see any problems and the v4l2_querycap() problem has been
	fixed with this patch.

	After the above test, ran bind/unbind snd_usb_audio 1000 times.
	Didn't see any problems. Generated media graph and the graph
	looks good."

Cc: stable@vger.kernel.org
Reviewed-by: Shuah Khan 
Tested-by: Shuah Khan 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

[media] au0828: fix au0828_v4l2_close() dev_state race condition

2016-04-20T05:03:43+00:00

[ Upstream commit ed940cd27416f9887864b95e1f8f8845aa9d6391 ]

au0828_v4l2_close() check for dev_state == DEV_DISCONNECTED will fail to
detect the device disconnected state correctly, if au0828_v4l2_open() runs
to set the DEV_INITIALIZED bit. A loop test of bind/unbind found this bug
by increasing the likelihood of au0828_v4l2_open() occurring while unbind
is in progress. When au0828_v4l2_close() fails to detect that the device
is in disconnect state, it attempts to power down the device and fails with
the following general protection fault:

[  260.992962] Call Trace:
[  260.993008]  [] ? xc5000_sleep+0x8f/0xd0 [xc5000]
[  260.993095]  [] ? fe_standby+0x3c/0x50 [tuner]
[  260.993186]  [] au0828_v4l2_close+0x53c/0x620 [au0828]
[  260.993298]  [] v4l2_release+0xf0/0x210 [videodev]
[  260.993382]  [] __fput+0x1fc/0x6c0
[  260.993449]  [] ____fput+0xe/0x10
[  260.993519]  [] task_work_run+0x133/0x1f0
[  260.993602]  [] exit_to_usermode_loop+0x140/0x170
[  260.993681]  [] syscall_return_slowpath+0x16a/0x1a0
[  260.993754]  [] entry_SYSCALL_64_fastpath+0xa6/0xa8

Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

[media] bttv: Width must be a multiple of 16 when capturing planar formats

2016-04-18T12:50:44+00:00

[ Upstream commit 5c915c68763889f0183a1cc61c84bb228b60124a ]

On my bttv card "Hauppauge WinTV [card=10]" capturing in YV12 fmt at max
size results in a solid green rectangle being captured (all colors 0 in
YUV).

This turns out to be caused by max-width (924) not being a multiple of 16.

We've likely never hit this problem before since normally xawtv / tvtime,
etc. will prefer packed pixel formats. But when using a video card which
is using xf86-video-modesetting + glamor, only planar XVideo fmts are
available, and xawtv will chose a matching capture format to avoid needing
to do conversion, triggering the solid green window problem.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Acked-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

[media] saa7134: Fix bytesperline not being set correctly for planar formats

2016-04-18T12:50:37+00:00

[ Upstream commit 3e71da19f9dc22e39a755d6ae9678661abb66adc ]

bytesperline should be the bytesperline for the first plane for planar
formats, not that of all planes combined.

This fixes a crash in xawtv caused by the wrong bpl.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1305389
Reported-and-tested-by: Stas Sergeev 

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

[media] adv7511: TX_EDID_PRESENT is still 1 after a disconnect

2016-04-18T12:50:37+00:00

[ Upstream commit b339a72e04a62f0b1882c43492fc712f1176b3e6 ]

The V4L2_CID_TX_EDID_PRESENT control reports if an EDID is present.
The adv7511 however still reported the EDID present after disconnecting
the HDMI cable. Fix the logic regarding this control. And when the EDID
is disconnected also call ADV7511_EDID_DETECT to notify the bridge driver.
This was also missing.

Signed-off-by: Hans Verkuil 
Cc:       # for v3.12 and up
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin

[media] pwc: Add USB id for Philips Spc880nc webcam

2016-04-18T12:50:34+00:00

[ Upstream commit 7445e45d19a09e5269dc85f17f9635be29d2f76c ]

SPC 880NC PC camera discussions:
	http://www.pclinuxos.com/forum/index.php/topic,135688.0.html

Cc: stable@vger.kernel.org
Reported-by: Kikim 
Signed-off-by: Hans de Goede 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin