linux.git/drivers/media, branch v4.16.13 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git media: cx25821: prevent out-of-bounds read on array card 2018-05-25T14:46:18+00:00 Colin Ian King colin.king@canonical.com 2018-01-31T17:33:09+00:00 d48ec78eb9aa2aa96321460e573d999179d1e7cc [ Upstream commit 67300abdbe9f1717532aaf4e037222762716d0f6 ] Currently an out of range dev->nr is detected by just reporting the issue and later on an out-of-bounds read on array card occurs because of this. Fix this by checking the upper range of dev->nr with the size of array card (removes the hard coded size), move this check earlier and also exit with the error -ENOSYS to avoid the later out-of-bounds array read. Detected by CoverityScan, CID#711191 ("Out-of-bounds-read") Fixes: commit 02b20b0b4cde ("V4L/DVB (12730): Add conexant cx25821 driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: %ld -> %zd] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 67300abdbe9f1717532aaf4e037222762716d0f6 ]

Currently an out of range dev->nr is detected by just reporting the
issue and later on an out-of-bounds read on array card occurs because
of this. Fix this by checking the upper range of dev->nr with the size
of array card (removes the hard coded size), move this check earlier
and also exit with the error -ENOSYS to avoid the later out-of-bounds
array read.

Detected by CoverityScan, CID#711191 ("Out-of-bounds-read")

Fixes: commit 02b20b0b4cde ("V4L/DVB (12730): Add conexant cx25821 driver")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: %ld -> %zd]
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: vivid: fix incorrect capabilities for radio 2018-05-25T14:46:18+00:00 Hans Verkuil hverkuil@xs4all.nl 2018-02-01T07:36:33+00:00 c7c622f4e15cadabbff96deef48bab78d55a1717 [ Upstream commit 65243386f41d38460bfd4375d231a7c0346d0401 ] The vivid driver has two custom controls that change the behavior of RDS. Depending on the control setting the V4L2_CAP_READWRITE capability is toggled. However, after an earlier commit the capability was no longer set correctly. This is now fixed. Fixes: 9765a32cd8 ("vivid: set device_caps in video_device") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 65243386f41d38460bfd4375d231a7c0346d0401 ]

The vivid driver has two custom controls that change the behavior of RDS.
Depending on the control setting the V4L2_CAP_READWRITE capability is toggled.
However, after an earlier commit the capability was no longer set correctly.
This is now fixed.

Fixes: 9765a32cd8 ("vivid: set device_caps in video_device")

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: vb2: Fix videobuf2 to map correct area 2018-05-25T14:46:18+00:00 Masami Hiramatsu mhiramat@kernel.org 2018-02-06T08:02:23+00:00 37d683fbfea8e115fe1d2352a6ff448f4f2a265d [ Upstream commit d13a0139d7874a0577b5955d6eed895517d23b72 ] Fixes vb2_vmalloc_get_userptr() to ioremap correct area. Since the current code does ioremap the page address, if the offset > 0, it does not do ioremap the last page and results in kernel panic. This fixes to pass the size + offset to ioremap so that ioremap can map correct area. Also, this uses __pfn_to_phys() to get the physical address of given PFN. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reported-by: Takao Orito <orito.takao@socionext.com> Reported-by: Fumihiro ATSUMI <atsumi@infinitegra.co.jp> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit d13a0139d7874a0577b5955d6eed895517d23b72 ]

Fixes vb2_vmalloc_get_userptr() to ioremap correct area.
Since the current code does ioremap the page address, if the offset > 0,
it does not do ioremap the last page and results in kernel panic.

This fixes to pass the size + offset to ioremap so that ioremap
can map correct area. Also, this uses __pfn_to_phys() to get the physical
address of given PFN.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Takao Orito <orito.takao@socionext.com>
Reported-by: Fumihiro ATSUMI <atsumi@infinitegra.co.jp>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: i2c: adv748x: fix HDMI field heights 2018-05-25T14:46:18+00:00 Kieran Bingham kieran.bingham@ideasonboard.com 2018-01-08T18:14:04+00:00 6ab7ffcfa080ffd31d4db2d266375f64105c4f64 [ Upstream commit 9f564184e6cc21a86c26bab920afac1bab7653ff ] The ADV748x handles interlaced media using V4L2_FIELD_ALTERNATE field types. The correct specification for the height on the mbus is the image height, in this instance, the field height. The AFE component already correctly adjusts the height on the mbus, but the HDMI component got left behind. Adjust the mbus height to correctly describe the image height of the fields when processing interlaced video for HDMI pipelines. Fixes: 3e89586a64df ("media: i2c: adv748x: add adv748x driver") Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 9f564184e6cc21a86c26bab920afac1bab7653ff ]

The ADV748x handles interlaced media using V4L2_FIELD_ALTERNATE field
types.  The correct specification for the height on the mbus is the
image height, in this instance, the field height.

The AFE component already correctly adjusts the height on the mbus, but
the HDMI component got left behind.

Adjust the mbus height to correctly describe the image height of the
fields when processing interlaced video for HDMI pipelines.

Fixes: 3e89586a64df ("media: i2c: adv748x: add adv748x driver")

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: v4l: vsp1: Fix display stalls when requesting too many inputs 2018-05-25T14:46:17+00:00 Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com 2017-12-03T10:06:57+00:00 765c00006085a2b09fc021a7ab1ad22a0485725a [ Upstream commit 5e3e4cb5e24b92773b194aa90066170b12133bc6 ] Make sure we don't accept more inputs than the hardware can handle. This is a temporary fix to avoid display stall, we need to instead allocate the BRU or BRS to display pipelines dynamically based on the number of planes they each use. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 5e3e4cb5e24b92773b194aa90066170b12133bc6 ]

Make sure we don't accept more inputs than the hardware can handle. This
is a temporary fix to avoid display stall, we need to instead allocate
the BRU or BRS to display pipelines dynamically based on the number of
planes they each use.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: em28xx: Add Hauppauge SoloHD/DualHD bulk models 2018-05-25T14:46:17+00:00 Brad Love brad@nextdimension.cc 2018-01-05T00:04:15+00:00 6a97f4b43d6def0e96de1cade821ace4c3ae0701 [ Upstream commit f2a326c928cca1f5e36a3dceaf66e8c6b34e9cb8 ] Add additional pids to driver list Signed-off-by: Brad Love <brad@nextdimension.cc> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit f2a326c928cca1f5e36a3dceaf66e8c6b34e9cb8 ]

Add additional pids to driver list

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: lgdt3306a: Fix a double kfree on i2c device remove 2018-05-25T14:46:17+00:00 Brad Love brad@nextdimension.cc 2018-01-05T14:57:13+00:00 ac186fd7985640e949f3e26f1faaf7641239990b [ Upstream commit 94448e21cf08b10f7dc7acdaca387594370396b0 ] Both lgdt33606a_release and lgdt3306a_remove kfree state, but _release is called first, then _remove operates on states members before kfree'ing it. This can lead to random oops/GPF/etc on USB disconnect. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 94448e21cf08b10f7dc7acdaca387594370396b0 ]

Both lgdt33606a_release and lgdt3306a_remove kfree state, but _release is
called first, then _remove operates on states members before kfree'ing it.
This can lead to random oops/GPF/etc on USB disconnect.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: s3c-camif: fix out-of-bounds array access 2018-05-25T14:46:17+00:00 Arnd Bergmann arnd@arndb.de 2018-01-16T21:52:15+00:00 1722c664c0a1c9e562a7166b4ad269961b9c1cae [ Upstream commit a398e043637a4819a0e96467bfecaabf3224dd62 ] While experimenting with older compiler versions, I ran into a warning that no longer shows up on gcc-4.8 or newer: drivers/media/platform/s3c-camif/camif-capture.c: In function '__camif_subdev_try_format': drivers/media/platform/s3c-camif/camif-capture.c:1265:25: error: array subscript is below array bounds This is an off-by-one bug, leading to an access before the start of the array, while newer compilers silently assume this undefined behavior cannot happen and leave the loop at index 0 if no other entry matches. As Sylvester explains, we actually need to ensure that the value is within the range, so this reworks the loop to be easier to parse correctly, and an additional check to fall back on the first format value for any unexpected input. I found an existing gcc bug for it and added a reduced version of the function there. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69249#c3 Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit a398e043637a4819a0e96467bfecaabf3224dd62 ]

While experimenting with older compiler versions, I ran
into a warning that no longer shows up on gcc-4.8 or newer:

drivers/media/platform/s3c-camif/camif-capture.c: In function '__camif_subdev_try_format':
drivers/media/platform/s3c-camif/camif-capture.c:1265:25: error: array subscript is below array bounds

This is an off-by-one bug, leading to an access before the start of the
array, while newer compilers silently assume this undefined behavior
cannot happen and leave the loop at index 0 if no other entry matches.

As Sylvester explains, we actually need to ensure that the
value is within the range, so this reworks the loop to be
easier to parse correctly, and an additional check to fall
back on the first format value for any unexpected input.

I found an existing gcc bug for it and added a reduced version
of the function there.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69249#c3
Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: cx23885: Set subdev host data to clk_freq pointer 2018-05-25T14:46:17+00:00 Brad Love brad@nextdimension.cc 2018-03-06T19:15:36+00:00 6f7b0a06c43a69436ae637d077f10d4126bd202e [ Upstream commit 5ceade1d97fc6687e050c44c257382c192f56276 ] Currently clk_freq is ignored entirely, because the cx235840 driver configures the xtal at the chip defaults. This is an issue if a board is produced with a non-default frequency crystal. If clk_freq is not zero the cx25840 will attempt to use the setting provided, or fall back to defaults otherwise. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 5ceade1d97fc6687e050c44c257382c192f56276 ]

Currently clk_freq is ignored entirely, because the cx235840 driver
configures the xtal at the chip defaults. This is an issue if a
board is produced with a non-default frequency crystal. If clk_freq
is not zero the cx25840 will attempt to use the setting provided,
or fall back to defaults otherwise.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
media: cx23885: Override 888 ImpactVCBe crystal frequency 2018-05-25T14:46:17+00:00 Brad Love brad@nextdimension.cc 2018-03-06T19:15:37+00:00 ed27030e1351698c5d4a7ff8a1b0bc6c90e59b88 [ Upstream commit 779c79d4b833ec646b0aed878da38edb45bbe156 ] Hauppauge produced a revision of ImpactVCBe using an 888, with a 25MHz crystal, instead of using the default third overtone 50Mhz crystal. This overrides that frequency so that the cx25840 is properly configured. Without the proper crystal setup the cx25840 cannot load the firmware or decode video. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 779c79d4b833ec646b0aed878da38edb45bbe156 ]

Hauppauge produced a revision of ImpactVCBe using an 888,
with a 25MHz crystal, instead of using the default third
overtone 50Mhz crystal. This overrides that frequency so
that the cx25840 is properly configured. Without the proper
crystal setup the cx25840 cannot load the firmware or
decode video.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>