linux.git/drivers/memstick, branch v6.1.168 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git memstick: Add timeout to prevent indefinite waiting 2025-12-06T21:12:15+00:00 Jiayi Li lijiayi@kylinos.cn 2025-08-04T02:48:25+00:00 fc2ffe95537545e193203c67ed54ea973842dfbe [ Upstream commit b65e630a55a490a0269ab1e4a282af975848064c ] Add timeout handling to wait_for_completion calls in memstick_set_rw_addr() and memstick_alloc_card() to prevent indefinite blocking in case of hardware or communication failures. Signed-off-by: Jiayi Li <lijiayi@kylinos.cn> Link: https://lore.kernel.org/r/20250804024825.1565078-1-lijiayi@kylinos.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b65e630a55a490a0269ab1e4a282af975848064c ]

Add timeout handling to wait_for_completion calls in memstick_set_rw_addr()
and memstick_alloc_card() to prevent indefinite blocking in case of
hardware or communication failures.

Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Link: https://lore.kernel.org/r/20250804024825.1565078-1-lijiayi@kylinos.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
memstick: Fix deadlock by moving removing flag earlier 2025-08-28T14:26:13+00:00 Jiayi Li lijiayi@kylinos.cn 2025-08-04T01:36:04+00:00 cbe4bc935dcdd5ac8543c4bc2191f3d68ad718b3 commit 99d7ab8db9d8230b243f5ed20ba0229e54cc0dfa upstream. The existing memstick core patch: commit 62c59a8786e6 ("memstick: Skip allocating card when removing host") sets host->removing in memstick_remove_host(),but still exists a critical time window where memstick_check can run after host->eject is set but before removing is set. In the rtsx_usb_ms driver, the problematic sequence is: rtsx_usb_ms_drv_remove: memstick_check: host->eject = true cancel_work_sync(handle_req) if(!host->removing) ... memstick_alloc_card() memstick_set_rw_addr() memstick_new_req() rtsx_usb_ms_request() if(!host->eject) skip schedule_work wait_for_completion() memstick_remove_host: [blocks indefinitely] host->removing = true flush_workqueue() [block] 1. rtsx_usb_ms_drv_remove sets host->eject = true 2. cancel_work_sync(&host->handle_req) runs 3. memstick_check work may be executed here <-- danger window 4. memstick_remove_host sets removing = 1 During this window (step 3), memstick_check calls memstick_alloc_card, which may indefinitely waiting for mrq_complete completion that will never occur because rtsx_usb_ms_request sees eject=true and skips scheduling work, memstick_set_rw_addr waits forever for completion. This causes a deadlock when memstick_remove_host tries to flush_workqueue, waiting for memstick_check to complete, while memstick_check is blocked waiting for mrq_complete completion. Fix this by setting removing=true at the start of rtsx_usb_ms_drv_remove, before any work cancellation. This ensures memstick_check will see the removing flag immediately and exit early, avoiding the deadlock. Fixes: 62c59a8786e6 ("memstick: Skip allocating card when removing host") Signed-off-by: Jiayi Li <lijiayi@kylinos.cn> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250804013604.1311218-1-lijiayi@kylinos.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 99d7ab8db9d8230b243f5ed20ba0229e54cc0dfa upstream.

The existing memstick core patch: commit 62c59a8786e6 ("memstick: Skip
allocating card when removing host") sets host->removing in
memstick_remove_host(),but still exists a critical time window where
memstick_check can run after host->eject is set but before removing is set.

In the rtsx_usb_ms driver, the problematic sequence is:

rtsx_usb_ms_drv_remove:          memstick_check:
  host->eject = true
  cancel_work_sync(handle_req)     if(!host->removing)
  ...                              memstick_alloc_card()
                                     memstick_set_rw_addr()
                                       memstick_new_req()
                                         rtsx_usb_ms_request()
                                           if(!host->eject)
                                           skip schedule_work
                                       wait_for_completion()
  memstick_remove_host:                [blocks indefinitely]
    host->removing = true
    flush_workqueue()
    [block]

1. rtsx_usb_ms_drv_remove sets host->eject = true
2. cancel_work_sync(&host->handle_req) runs
3. memstick_check work may be executed here <-- danger window
4. memstick_remove_host sets removing = 1

During this window (step 3), memstick_check calls memstick_alloc_card,
which may indefinitely waiting for mrq_complete completion that will
never occur because rtsx_usb_ms_request sees eject=true and skips
scheduling work, memstick_set_rw_addr waits forever for completion.

This causes a deadlock when memstick_remove_host tries to flush_workqueue,
waiting for memstick_check to complete, while memstick_check is blocked
waiting for mrq_complete completion.

Fix this by setting removing=true at the start of rtsx_usb_ms_drv_remove,
before any work cancellation. This ensures memstick_check will see the
removing flag immediately and exit early, avoiding the deadlock.

Fixes: 62c59a8786e6 ("memstick: Skip allocating card when removing host")
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250804013604.1311218-1-lijiayi@kylinos.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
memstick: core: Zero initialize id_reg in h_memstick_read_dev_id() 2025-07-24T06:51:49+00:00 Nathan Chancellor nathan@kernel.org 2025-07-15T22:56:05+00:00 cdbca8720882d3eb5e2bbcde96b97df440bc7136 commit 21b34a3a204ed616373a12ec17dc127ebe51eab3 upstream. A new warning in clang [1] points out that id_reg is uninitialized then passed to memstick_init_req() as a const pointer: drivers/memstick/core/memstick.c:330:59: error: variable 'id_reg' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer] 330 | memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg, | ^~~~~~ Commit de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull warning") intentionally passed this variable uninitialized to avoid an -Wnonnull warning from a NULL value that was previously there because id_reg is never read from the call to memstick_init_req() in h_memstick_read_dev_id(). Just zero initialize id_reg to avoid the warning, which is likely happening in the majority of builds using modern compilers that support '-ftrivial-auto-var-init=zero'. Cc: stable@vger.kernel.org Fixes: de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull warning") Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1] Closes: https://github.com/ClangBuiltLinux/linux/issues/2105 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250715-memstick-fix-uninit-const-pointer-v1-1-f6753829c27a@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 21b34a3a204ed616373a12ec17dc127ebe51eab3 upstream.

A new warning in clang [1] points out that id_reg is uninitialized then
passed to memstick_init_req() as a const pointer:

  drivers/memstick/core/memstick.c:330:59: error: variable 'id_reg' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
    330 |                 memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg,
        |                                                                         ^~~~~~

Commit de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull
warning") intentionally passed this variable uninitialized to avoid an
-Wnonnull warning from a NULL value that was previously there because
id_reg is never read from the call to memstick_init_req() in
h_memstick_read_dev_id(). Just zero initialize id_reg to avoid the
warning, which is likely happening in the majority of builds using
modern compilers that support '-ftrivial-auto-var-init=zero'.

Cc: stable@vger.kernel.org
Fixes: de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull warning")
Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2105
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250715-memstick-fix-uninit-const-pointer-v1-1-f6753829c27a@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove 2025-04-07T08:05:46+00:00 Luo Qiu luoqiu@kylinsec.com.cn 2025-03-17T10:14:38+00:00 52d942a5302eefb3b7a3bfee310a5a33feeedc21 commit 4676741a3464b300b486e70585c3c9b692be1632 upstream. This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] Read of size 8 at addr ffff888136335380 by task kworker/6:0/140241 CPU: 6 UID: 0 PID: 140241 Comm: kworker/6:0 Kdump: loaded Tainted: G E 6.14.0-rc6+ #1 Tainted: [E]=UNSIGNED_MODULE Hardware name: LENOVO 30FNA1V7CW/1057, BIOS S0EKT54A 07/01/2024 Workqueue: events rtsx_usb_ms_poll_card [rtsx_usb_ms] Call Trace: <TASK> dump_stack_lvl+0x51/0x70 print_address_description.constprop.0+0x27/0x320 ? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] print_report+0x3e/0x70 kasan_report+0xab/0xe0 ? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] ? __pfx_rtsx_usb_ms_poll_card+0x10/0x10 [rtsx_usb_ms] ? __pfx___schedule+0x10/0x10 ? kick_pool+0x3b/0x270 process_one_work+0x357/0x660 worker_thread+0x390/0x4c0 ? __pfx_worker_thread+0x10/0x10 kthread+0x190/0x1d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 161446: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_noprof+0x1a7/0x470 memstick_alloc_host+0x1f/0xe0 [memstick] rtsx_usb_ms_drv_probe+0x47/0x320 [rtsx_usb_ms] platform_probe+0x60/0xe0 call_driver_probe+0x35/0x120 really_probe+0x123/0x410 __driver_probe_device+0xc7/0x1e0 driver_probe_device+0x49/0xf0 __device_attach_driver+0xc6/0x160 bus_for_each_drv+0xe4/0x160 __device_attach+0x13a/0x2b0 bus_probe_device+0xbd/0xd0 device_add+0x4a5/0x760 platform_device_add+0x189/0x370 mfd_add_device+0x587/0x5e0 mfd_add_devices+0xb1/0x130 rtsx_usb_probe+0x28e/0x2e0 [rtsx_usb] usb_probe_interface+0x15c/0x460 call_driver_probe+0x35/0x120 really_probe+0x123/0x410 __driver_probe_device+0xc7/0x1e0 driver_probe_device+0x49/0xf0 __device_attach_driver+0xc6/0x160 bus_for_each_drv+0xe4/0x160 __device_attach+0x13a/0x2b0 rebind_marked_interfaces.isra.0+0xcc/0x110 usb_reset_device+0x352/0x410 usbdev_do_ioctl+0xe5c/0x1860 usbdev_ioctl+0xa/0x20 __x64_sys_ioctl+0xc5/0xf0 do_syscall_64+0x59/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 161506: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x36/0x60 __kasan_slab_free+0x34/0x50 kfree+0x1fd/0x3b0 device_release+0x56/0xf0 kobject_cleanup+0x73/0x1c0 rtsx_usb_ms_drv_remove+0x13d/0x220 [rtsx_usb_ms] platform_remove+0x2f/0x50 device_release_driver_internal+0x24b/0x2e0 bus_remove_device+0x124/0x1d0 device_del+0x239/0x530 platform_device_del.part.0+0x19/0xe0 platform_device_unregister+0x1c/0x40 mfd_remove_devices_fn+0x167/0x170 device_for_each_child_reverse+0xc9/0x130 mfd_remove_devices+0x6e/0xa0 rtsx_usb_disconnect+0x2e/0xd0 [rtsx_usb] usb_unbind_interface+0xf3/0x3f0 device_release_driver_internal+0x24b/0x2e0 proc_disconnect_claim+0x13d/0x220 usbdev_do_ioctl+0xb5e/0x1860 usbdev_ioctl+0xa/0x20 __x64_sys_ioctl+0xc5/0xf0 do_syscall_64+0x59/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x20/0x40 kasan_record_aux_stack+0x85/0x90 insert_work+0x29/0x100 __queue_work+0x34a/0x540 call_timer_fn+0x2a/0x160 expire_timers+0x5f/0x1f0 __run_timer_base.part.0+0x1b6/0x1e0 run_timer_softirq+0x8b/0xe0 handle_softirqs+0xf9/0x360 __irq_exit_rcu+0x114/0x130 sysvec_apic_timer_interrupt+0x72/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 Second to last potentially related work creation: kasan_save_stack+0x20/0x40 kasan_record_aux_stack+0x85/0x90 insert_work+0x29/0x100 __queue_work+0x34a/0x540 call_timer_fn+0x2a/0x160 expire_timers+0x5f/0x1f0 __run_timer_base.part.0+0x1b6/0x1e0 run_timer_softirq+0x8b/0xe0 handle_softirqs+0xf9/0x360 __irq_exit_rcu+0x114/0x130 sysvec_apic_timer_interrupt+0x72/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 The buggy address belongs to the object at ffff888136335000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 896 bytes inside of freed 2048-byte region [ffff888136335000, ffff888136335800) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x136330 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff) page_type: f5(slab) raw: 0017ffffc0000040 ffff888100042f00 ffffea000417a000 dead000000000002 raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 0017ffffc0000040 ffff888100042f00 ffffea000417a000 dead000000000002 head: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 0017ffffc0000003 ffffea0004d8cc01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888136335280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888136335300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888136335380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888136335400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888136335480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management") Signed-off-by: Luo Qiu <luoqiu@kylinsec.com.cn> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/4B7BC3E6E291E6F2+20250317101438.25650-1-luoqiu@kylinsec.com.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4676741a3464b300b486e70585c3c9b692be1632 upstream.

This fixes the following crash:

==================================================================
BUG: KASAN: slab-use-after-free in rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
Read of size 8 at addr ffff888136335380 by task kworker/6:0/140241

CPU: 6 UID: 0 PID: 140241 Comm: kworker/6:0 Kdump: loaded Tainted: G            E      6.14.0-rc6+ #1
Tainted: [E]=UNSIGNED_MODULE
Hardware name: LENOVO 30FNA1V7CW/1057, BIOS S0EKT54A 07/01/2024
Workqueue: events rtsx_usb_ms_poll_card [rtsx_usb_ms]
Call Trace:
 <TASK>
 dump_stack_lvl+0x51/0x70
 print_address_description.constprop.0+0x27/0x320
 ? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
 print_report+0x3e/0x70
 kasan_report+0xab/0xe0
 ? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
 rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
 ? __pfx_rtsx_usb_ms_poll_card+0x10/0x10 [rtsx_usb_ms]
 ? __pfx___schedule+0x10/0x10
 ? kick_pool+0x3b/0x270
 process_one_work+0x357/0x660
 worker_thread+0x390/0x4c0
 ? __pfx_worker_thread+0x10/0x10
 kthread+0x190/0x1d0
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x2d/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1a/0x30
 </TASK>

Allocated by task 161446:
 kasan_save_stack+0x20/0x40
 kasan_save_track+0x10/0x30
 __kasan_kmalloc+0x7b/0x90
 __kmalloc_noprof+0x1a7/0x470
 memstick_alloc_host+0x1f/0xe0 [memstick]
 rtsx_usb_ms_drv_probe+0x47/0x320 [rtsx_usb_ms]
 platform_probe+0x60/0xe0
 call_driver_probe+0x35/0x120
 really_probe+0x123/0x410
 __driver_probe_device+0xc7/0x1e0
 driver_probe_device+0x49/0xf0
 __device_attach_driver+0xc6/0x160
 bus_for_each_drv+0xe4/0x160
 __device_attach+0x13a/0x2b0
 bus_probe_device+0xbd/0xd0
 device_add+0x4a5/0x760
 platform_device_add+0x189/0x370
 mfd_add_device+0x587/0x5e0
 mfd_add_devices+0xb1/0x130
 rtsx_usb_probe+0x28e/0x2e0 [rtsx_usb]
 usb_probe_interface+0x15c/0x460
 call_driver_probe+0x35/0x120
 really_probe+0x123/0x410
 __driver_probe_device+0xc7/0x1e0
 driver_probe_device+0x49/0xf0
 __device_attach_driver+0xc6/0x160
 bus_for_each_drv+0xe4/0x160
 __device_attach+0x13a/0x2b0
 rebind_marked_interfaces.isra.0+0xcc/0x110
 usb_reset_device+0x352/0x410
 usbdev_do_ioctl+0xe5c/0x1860
 usbdev_ioctl+0xa/0x20
 __x64_sys_ioctl+0xc5/0xf0
 do_syscall_64+0x59/0x170
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Freed by task 161506:
 kasan_save_stack+0x20/0x40
 kasan_save_track+0x10/0x30
 kasan_save_free_info+0x36/0x60
 __kasan_slab_free+0x34/0x50
 kfree+0x1fd/0x3b0
 device_release+0x56/0xf0
 kobject_cleanup+0x73/0x1c0
 rtsx_usb_ms_drv_remove+0x13d/0x220 [rtsx_usb_ms]
 platform_remove+0x2f/0x50
 device_release_driver_internal+0x24b/0x2e0
 bus_remove_device+0x124/0x1d0
 device_del+0x239/0x530
 platform_device_del.part.0+0x19/0xe0
 platform_device_unregister+0x1c/0x40
 mfd_remove_devices_fn+0x167/0x170
 device_for_each_child_reverse+0xc9/0x130
 mfd_remove_devices+0x6e/0xa0
 rtsx_usb_disconnect+0x2e/0xd0 [rtsx_usb]
 usb_unbind_interface+0xf3/0x3f0
 device_release_driver_internal+0x24b/0x2e0
 proc_disconnect_claim+0x13d/0x220
 usbdev_do_ioctl+0xb5e/0x1860
 usbdev_ioctl+0xa/0x20
 __x64_sys_ioctl+0xc5/0xf0
 do_syscall_64+0x59/0x170
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Last potentially related work creation:
 kasan_save_stack+0x20/0x40
 kasan_record_aux_stack+0x85/0x90
 insert_work+0x29/0x100
 __queue_work+0x34a/0x540
 call_timer_fn+0x2a/0x160
 expire_timers+0x5f/0x1f0
 __run_timer_base.part.0+0x1b6/0x1e0
 run_timer_softirq+0x8b/0xe0
 handle_softirqs+0xf9/0x360
 __irq_exit_rcu+0x114/0x130
 sysvec_apic_timer_interrupt+0x72/0x90
 asm_sysvec_apic_timer_interrupt+0x16/0x20

Second to last potentially related work creation:
 kasan_save_stack+0x20/0x40
 kasan_record_aux_stack+0x85/0x90
 insert_work+0x29/0x100
 __queue_work+0x34a/0x540
 call_timer_fn+0x2a/0x160
 expire_timers+0x5f/0x1f0
 __run_timer_base.part.0+0x1b6/0x1e0
 run_timer_softirq+0x8b/0xe0
 handle_softirqs+0xf9/0x360
 __irq_exit_rcu+0x114/0x130
 sysvec_apic_timer_interrupt+0x72/0x90
 asm_sysvec_apic_timer_interrupt+0x16/0x20

The buggy address belongs to the object at ffff888136335000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 896 bytes inside of
 freed 2048-byte region [ffff888136335000, ffff888136335800)

The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x136330
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 0017ffffc0000040 ffff888100042f00 ffffea000417a000 dead000000000002
raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000
head: 0017ffffc0000040 ffff888100042f00 ffffea000417a000 dead000000000002
head: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000
head: 0017ffffc0000003 ffffea0004d8cc01 ffffffffffffffff 0000000000000000
head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888136335280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888136335300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888136335380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff888136335400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888136335480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management")
Signed-off-by: Luo Qiu <luoqiu@kylinsec.com.cn>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/4B7BC3E6E291E6F2+20250317101438.25650-1-luoqiu@kylinsec.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
memstick r592: make memstick_debug_get_tpc_name() static 2023-07-19T14:21:08+00:00 Arnd Bergmann arnd@arndb.de 2023-05-16T20:27:04+00:00 16b5292beeeef8171f0caaedd864dd9503526ce4 [ Upstream commit 434587df9f7fd68575f99a889cc5f2efc2eaee5e ] There are no other files referencing this function, apparently it was left global to avoid an 'unused function' warning when the only caller is left out. With a 'W=1' build, it causes a 'missing prototype' warning though: drivers/memstick/host/r592.c:47:13: error: no previous prototype for 'memstick_debug_get_tpc_name' [-Werror=missing-prototypes] Annotate the function as 'static __maybe_unused' to avoid both problems. Fixes: 926341250102 ("memstick: add driver for Ricoh R5C592 card reader") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230516202714.560929-1-arnd@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 434587df9f7fd68575f99a889cc5f2efc2eaee5e ]

There are no other files referencing this function, apparently
it was left global to avoid an 'unused function' warning when
the only caller is left out. With a 'W=1' build, it causes
a 'missing prototype' warning though:

drivers/memstick/host/r592.c:47:13: error: no previous prototype for 'memstick_debug_get_tpc_name' [-Werror=missing-prototypes]

Annotate the function as 'static __maybe_unused' to avoid both
problems.

Fixes: 926341250102 ("memstick: add driver for Ricoh R5C592 card reader")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516202714.560929-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
memstick: r592: Fix UAF bug in r592_remove due to race condition 2023-05-24T16:32:35+00:00 Zheng Wang zyytlz.wz@163.com 2023-03-07T16:43:38+00:00 9a342d4eb9fb8e52f7d1afe088a79513f3f9a9a5 [ Upstream commit 63264422785021704c39b38f65a78ab9e4a186d7 ] In r592_probe, dev->detect_timer was bound with r592_detect_timer. In r592_irq function, the timer function will be invoked by mod_timer. If we remove the module which will call hantro_release to make cleanup, there may be a unfinished work. The possible sequence is as follows, which will cause a typical UAF bug. Fix it by canceling the work before cleanup in r592_remove. CPU0 CPU1 |r592_detect_timer r592_remove | memstick_free_host| put_device; | kfree(host); | | | queue_work | &host->media_checker //use Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Link: https://lore.kernel.org/r/20230307164338.1246287-1-zyytlz.wz@163.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 63264422785021704c39b38f65a78ab9e4a186d7 ]

In r592_probe, dev->detect_timer was bound with r592_detect_timer.
In r592_irq function, the timer function will be invoked by mod_timer.

If we remove the module which will call hantro_release to make cleanup,
there may be a unfinished work. The possible sequence is as follows,
which will cause a typical UAF bug.

Fix it by canceling the work before cleanup in r592_remove.

CPU0                  CPU1

                    |r592_detect_timer
r592_remove         |
  memstick_free_host|
  put_device;       |
  kfree(host);      |
                    |
                    | queue_work
                    |   &host->media_checker //use

Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230307164338.1246287-1-zyytlz.wz@163.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
memstick: fix memory leak if card device is never registered 2023-04-26T12:28:39+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2023-04-01T20:03:27+00:00 a3a93b46833faf7421d4424ab78c8f0402423d04 commit 4b6d621c9d859ff89e68cebf6178652592676013 upstream. When calling dev_set_name() memory is allocated for the name for the struct device. Once that structure device is registered, or attempted to be registerd, with the driver core, the driver core will handle cleaning up that memory when the device is removed from the system. Unfortunatly for the memstick code, there is an error path that causes the struct device to never be registered, and so the memory allocated in dev_set_name will be leaked. Fix that leak by manually freeing it right before the memory for the device is freed. Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: linux-mmc@vger.kernel.org Fixes: 0252c3b4f018 ("memstick: struct device - replace bus_id with dev_name(), dev_set_name()") Cc: stable <stable@kernel.org> Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/r/20230401200327.16800-1-gregkh@linuxfoundation.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4b6d621c9d859ff89e68cebf6178652592676013 upstream.

When calling dev_set_name() memory is allocated for the name for the
struct device.  Once that structure device is registered, or attempted
to be registerd, with the driver core, the driver core will handle
cleaning up that memory when the device is removed from the system.

Unfortunatly for the memstick code, there is an error path that causes
the struct device to never be registered, and so the memory allocated in
dev_set_name will be leaked.  Fix that leak by manually freeing it right
before the memory for the device is freed.

Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: linux-mmc@vger.kernel.org
Fixes: 0252c3b4f018 ("memstick: struct device - replace bus_id with dev_name(), dev_set_name()")
Cc: stable <stable@kernel.org>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/20230401200327.16800-1-gregkh@linuxfoundation.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
memstick/ms_block: Add check for alloc_ordered_workqueue 2022-12-31T12:32:25+00:00 Jiasheng Jiang jiasheng@iscas.ac.cn 2022-11-26T01:25:58+00:00 1b3f0b02486b553983c352442e20aded7458decd [ Upstream commit 4f431a047a5c8698ed4b67e2760cfbeb5fffb69d ] As the alloc_ordered_workqueue may return NULL pointer, it should be better to add check for the return value. Moreover, the msb->io_queue should be freed if error occurs later. Fixes: 0ab30494bc4f ("memstick: add support for legacy memorysticks") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20221126012558.34374-1-jiasheng@iscas.ac.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4f431a047a5c8698ed4b67e2760cfbeb5fffb69d ]

As the alloc_ordered_workqueue may return NULL pointer, it should be better
to add check for the return value. Moreover, the msb->io_queue should be
freed if error occurs later.

Fixes: 0ab30494bc4f ("memstick: add support for legacy memorysticks")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221126012558.34374-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc 2022-08-05T02:41:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-08-05T02:41:09+00:00 328141e51e6fc79d21168bfd4e356dddc2ec7491 Pull MMC updates from Ulf Hansson: "MMC core: - Add support for the asynchronous SDIO wakeup interrupts - Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap - Add support to store error stats from host drivers - Extend debugfs to show error stats from host drivers - Add single I/O read support in the recovery path for 4k sector cards MMC host: - dw_mmc-exynos: Convert corresponding DT bindings to the dtschema - dw_mmc-rockchip: Add support for the Rockchip RV1126 variant - mmc_spi: Convert corresponding DT bindings to the dtschema - mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode - mtk-sd: Add support for SDIO wake irqs - mtk-sd: Add support for the Mediatek MT8188 variant - renesas_sdhi: Drop redundant manual tap correction for newer SoCs - renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants - sdhci/cqhci: Add support to capture stats from host errors - sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0 - sdhci-msm: Add support for the MSM8998 and SM8450 variant - sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-of-dwcmshc: Enable reset support for the Rockchip variants - sdhci-pci-gli: Improve I/O read/write performance for GL9763E - sdhci-s3c: Convert corresponding DT bindings to the dtschema - tmio: Avoid glitches when resetting MEMSTICK core: - A couple of minor fixes and cleanups" * tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits) mmc: mediatek: add support for SDIO eint wakup IRQ mmc: core: Add support for SDIO wakeup interrupt dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126 mmc: renesas_sdhi: newer SoCs don't need manual tap correction mmc: cavium-thunderx: Add of_node_put() when breaking out of loop mmc: cavium-octeon: Add of_node_put() when breaking out of loop mmc: core: quirks: Add of_node_put() when breaking out of loop mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible mmc: sdhci-msm: drop redundant of_device_id entries dt-bindings: mmc: sdhci-msm: add MSM8998 mmc: block: Add single read for 4k sector cards mmc: mxcmmc: Use mmc_card_sdio macro mmc: core: Use mmc_card_* macro and add a new for the sd_combo type dt-bindings: mmc: sdhci-msm: constrain reg-names per variants dt-bindings: mmc: sdhci-msm: fix reg-names entries dt-bindings: mmc: Add compatible for MediaTek MT8188 dt-bindings: mmc: sdhci-msm: document resets mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R ... 
Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for the asynchronous SDIO wakeup interrupts
   - Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap
   - Add support to store error stats from host drivers
   - Extend debugfs to show error stats from host drivers
   - Add single I/O read support in the recovery path for 4k sector cards

  MMC host:
   - dw_mmc-exynos: Convert corresponding DT bindings to the dtschema
   - dw_mmc-rockchip: Add support for the Rockchip RV1126 variant
   - mmc_spi: Convert corresponding DT bindings to the dtschema
   - mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode
   - mtk-sd: Add support for SDIO wake irqs
   - mtk-sd: Add support for the Mediatek MT8188 variant
   - renesas_sdhi: Drop redundant manual tap correction for newer SoCs
   - renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants
   - sdhci/cqhci: Add support to capture stats from host errors
   - sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0
   - sdhci-msm: Add support for the MSM8998 and SM8450 variant
   - sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R
   - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant
   - sdhci-of-dwcmshc: Enable reset support for the Rockchip variants
   - sdhci-pci-gli: Improve I/O read/write performance for GL9763E
   - sdhci-s3c: Convert corresponding DT bindings to the dtschema
   - tmio: Avoid glitches when resetting

  MEMSTICK core:
   - A couple of minor fixes and cleanups"

* tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits)
  mmc: mediatek: add support for SDIO eint wakup IRQ
  mmc: core: Add support for SDIO wakeup interrupt
  dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
  dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126
  mmc: renesas_sdhi: newer SoCs don't need manual tap correction
  mmc: cavium-thunderx: Add of_node_put() when breaking out of loop
  mmc: cavium-octeon: Add of_node_put() when breaking out of loop
  mmc: core: quirks: Add of_node_put() when breaking out of loop
  mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume
  dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible
  mmc: sdhci-msm: drop redundant of_device_id entries
  dt-bindings: mmc: sdhci-msm: add MSM8998
  mmc: block: Add single read for 4k sector cards
  mmc: mxcmmc: Use mmc_card_sdio macro
  mmc: core: Use mmc_card_* macro and add a new for the sd_combo type
  dt-bindings: mmc: sdhci-msm: constrain reg-names per variants
  dt-bindings: mmc: sdhci-msm: fix reg-names entries
  dt-bindings: mmc: Add compatible for MediaTek MT8188
  dt-bindings: mmc: sdhci-msm: document resets
  mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R
  ...
memstick/ms_block: Use the bitmap API when applicable 2022-07-12T10:29:36+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2022-06-25T12:56:05+00:00 aabf199c4eff56e8b36a4c2807c041d93b20c1e1 Use bitmap_equal() instead of hand writing it. It improves semantic and avoids some explicit computation to convert a number of bits to a number of bytes. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/b216df8798f765ab14bce65739c220643320f376.1656155715.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Use bitmap_equal() instead of hand writing it. It improves semantic and
avoids some explicit computation to convert a number of bits to a number of
bytes.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/b216df8798f765ab14bce65739c220643320f376.1656155715.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>