linux.git/drivers/misc/cardreader, branch v5.4.160

misc: alcor_pci: fix inverted branch condition

2021-07-20T14:10:53+00:00

commit 281e468446994a7672733af2bf941f4110d4a895 upstream.

This patch fixes a trivial mistake that I made in the previous attempt
in fixing the null bridge issue. The branch condition is inverted and we
should call alcor_pci_find_cap_offset() only if bridge is not null.

Reported-by: Colin Ian King 
Fixes: 3ce3e45cc333 ("misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge")
Signed-off-by: Tong Zhang 
Link: https://lore.kernel.org/r/20210522043725.602179-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge

2021-07-20T14:10:41+00:00

[ Upstream commit 3ce3e45cc333da707d4d6eb433574b990bcc26f5 ]

There is an issue with the ASPM(optional) capability checking function.
A device might be attached to root complex directly, in this case,
bus->self(bridge) will be NULL, thus priv->parent_pdev is NULL.
Since alcor_pci_init_check_aspm(priv->parent_pdev) checks the PCI link's
ASPM capability and populate parent_cap_off, which will be used later by
alcor_pci_aspm_ctrl() to dynamically turn on/off device, what we can do
here is to avoid checking the capability if we are on the root complex.
This will make pdev_cap_off 0 and alcor_pci_aspm_ctrl() will simply
return when bring called, effectively disable ASPM for the device.

[    1.246492] BUG: kernel NULL pointer dereference, address: 00000000000000c0
[    1.248731] RIP: 0010:pci_read_config_byte+0x5/0x40
[    1.253998] Call Trace:
[    1.254131]  ? alcor_pci_find_cap_offset.isra.0+0x3a/0x100 [alcor_pci]
[    1.254476]  alcor_pci_probe+0x169/0x2d5 [alcor_pci]

Co-developed-by: Greg Kroah-Hartman 
Signed-off-by: Tong Zhang 
Link: https://lore.kernel.org/r/20210513040732.1310159-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

misc: rtsx: init of rts522a add OCP power off when no card is present

2021-03-04T09:26:45+00:00

commit 920fd8a70619074eac7687352c8f1c6f3c2a64a5 upstream.

Power down OCP for power consumption
when no SD/MMC card is present

Cc: stable@vger.kernel.org
Signed-off-by: Ricky Wu 
Link: https://lore.kernel.org/r/20210204083115.9471-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman

misc: rtsx: do not setting OC_POWER_DOWN reg in rtsx_pci_init_ocp()

2020-11-01T11:01:06+00:00

commit 551b6729578a8981c46af964c10bf7d5d9ddca83 upstream.

this power saving action in rtsx_pci_init_ocp() cause INTEL-NUC6 platform
missing card reader

Signed-off-by: Ricky Wu 
Link: https://lore.kernel.org/r/20200824030006.30033-1-ricky_wu@realtek.com
Cc: Chris Clayton 
Signed-off-by: Greg Kroah-Hartman

misc: rtsx: Fix memory leak in rtsx_pci_probe

2020-10-29T08:58:06+00:00

[ Upstream commit bc28369c6189009b66d9619dd9f09bd8c684bb98 ]

When mfd_add_devices() fail, pcr->slots should also be freed. However,
the current implementation does not free the member, leading to a memory
leak.

Fix this by adding a new goto label that frees pcr->slots.

Signed-off-by: Keita Suzuki 
Link: https://lore.kernel.org/r/20200909071853.4053-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

misc: rtsx: Add short delay after exit from ASPM

2020-05-27T15:46:46+00:00

commit 7a839dbab1be59f5ed3b3b046de29e166784c9b4 upstream.

DMA transfers to and from the SD card stall for 10 seconds and run into
timeout on RTS5260 card readers after ASPM was enabled.

Adding a short msleep after disabling ASPM fixes the issue on several
Dell Precision 7530/7540 systems I tested.

This function is only called when waking up after the chip went into
power-save after not transferring data for a few seconds. The added
msleep does therefore not change anything in data transfer speed or
induce any excessive waiting while data transfers are running, or the
chip is sleeping. Only the transition from sleep to active is affected.

Signed-off-by: Klaus Doth 
Cc: stable 
Link: https://lore.kernel.org/r/4434eaa7-2ee3-a560-faee-6cee63ebd6d4@doth.eu
Signed-off-by: Greg Kroah-Hartman

misc: rtsx: set correct pcr_ops for rts522A

2020-04-08T07:08:41+00:00

commit 10cea23b6aae15e8324f4101d785687f2c514fe5 upstream.

rts522a should use rts522a_pcr_ops, which is
diffrent with rts5227 in phy/hw init setting.

Fixes: ce6a5acc9387 ("mfd: rtsx: Add support for rts522A")
Signed-off-by: YueHaibing 
Cc: stable 
Link: https://lore.kernel.org/r/20200326032618.20472-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman

mmc: rtsx_pci: Fix support for speed-modes that relies on tuning

2020-03-25T07:25:54+00:00

commit 4686392c32361c97e8434adf9cc77ad7991bfa81 upstream.

The TX/RX register should not be treated the same way to allow for better
support of tuning. Fix this by using a default initial value for TX.

Signed-off-by: Ricky Wu 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316025232.1167-1-ricky_wu@realtek.com
[Ulf: Updated changelog]
Signed-off-by: Ulf Hansson 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

misc: alcor_pci: Use dev_get_drvdata

2019-07-25T08:06:54+00:00

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan 
Link: https://lore.kernel.org/r/20190723124649.24728-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

2019-06-19T15:09:07+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Alexios Zavras 
Reviewed-by: Allison Randal 
Reviewed-by: Enrico Weigelt 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman