Signed-off-by: Len Brown <len.brown@intel.com>
After XPC has been up and running on multiple partitions for any length of time, if XPC on one of the partitions is stopped and restarted (either by a rmmod/insmod or a system restart), it is possible for the XPCs running on the other partitions to falsely detect a lack of heartbeat from the XPC that was just restarted. This false detection will occur if the restarted XPC comes up within the five-seconds preceding one of the other XPC's heartbeat check (which occurs once every twenty seconds). The detection of no heartbeat results in the detecting XPC deactivating from the just restarted XPC. The only remedy is to restart one of the XPCs and hope that one doesn't hit this five-second window on any of the other partitions. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Robin Holt <holt@sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Conflicts: drivers/misc/Kconfig Signed-off-by: Len Brown <len.brown@intel.com>
GBLS and GBLL only differ in the clearing of the GHKS flag, so there is no need to have two backlight level readouts. Also, per Peter Gruber, the need for the BLNF check has disappeared. As a result, cleanups can be made in the code. This has been tested on the both the S6410 and the S6420 platforms and causes no functionality regressions, on the console without X or within X. One module parameter to disable the hotkeys is dropped, as we only ever took one codepath anyway. Signed-off-by: Tony Vroon <tony@linx.net> Tested-by: Peter Gruber <nokos@gmx.net> Tested-By: Stephen Gildea <stepheng+linux@gildea.com> Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Len Brown <len.brown@intel.com>
The FUNC interface in the Fujitsu-Siemens DSDT was unused until now. It exposes state information that is now reported in additional platform files (whether the radios are killed by the hardware switch or operational, whether the machine is docked and whether the lid is open). Support for the backlight class is now extended with the ability to power the backlight on & off. Optional support for the LED class allows the keyboard headlamps found on the U810 netbook and the Fujitsu logo illumination on the P8010 notebook to be turned on & off. This was fed through checkpatch.pl and tested on the S6420, P8010 & U810 platforms. Signed-off-by: Stephen Gildea <stepheng+linux@gildea.com> Tested-by: Stephen Gildea <stepheng+linux@gildea.com> Tested-by: Julian Brown <jules@panic.cs-bristol.org.uk> Signed-off-by: Tony Vroon <tony@linx.net> Tested-by: Peter Gruber <nokos@gmx.net> Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Len Brown <len.brown@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits) [SCSI] qla2xxx: Update version number to 8.03.00-k1. [SCSI] qla2xxx: Add ISP81XX support. [SCSI] qla2xxx: Use proper request/response queues with MQ instantiations. [SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump. [SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump. [SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages. [SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled. [SCSI] qla2xxx: Remove support for reading/writing HW-event-log. [SCSI] cxgb3i: add missing include [SCSI] scsi_lib: fix DID_RESET status problems [SCSI] fc transport: restore missing dev_loss_tmo callback to LLDD [SCSI] aha152x_cs: Fix regression that keeps driver from using shared interrupts [SCSI] sd: Correctly handle 6-byte commands with DIX [SCSI] sd: DIF: Fix tagging on platforms with signed char [SCSI] sd: DIF: Show app tag on error [SCSI] Fix error handling for DIF/DIX [SCSI] scsi_lib: don't decrement busy counters when inserting commands [SCSI] libsas: fix test for negative unsigned and typos [SCSI] a2091, gvp11: kill warn_unused_result warnings [SCSI] fusion: Move a dereference below a NULL test ... Fixed up trivial conflict due to moving the async part of sd_probe around in the async probes vs using dev_set_name() in naming.