commit c40765d919d25d2d44d99c4ce39e48808f137e1e upstream. According the spec the host should read H_CSR again after asserting reset H_RST to ensure that reset was read by the firmware Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07cd7be3d92eeeae1f92a017f2cfe4fdd9256526 upstream. It my take time till ME_RDY will be cleared after the reset, so we cannot check the bit before we got the interrupt Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b04ada92ffaabb868497a1fce8e4f6bf74e5488f upstream. We cleared H_RST for H_CSR on spurious interrupt generated when ME_RDY while cleared and not while ME_RDY is set. The spurious interrupt is not delivered on all platforms in this case the driver may fail to initialize. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ignore client writing state during cb completion to fix a memory leak. When moving cbs to the completion list we should not look at writing_state as this state can be already overwritten by next write, the fact that a cb is on the write waiting list means that it was already written to the HW and we can safely complete it. Same pays for wait in poll handler, we do not have to check the state wake is done after completion list processing. Cc: stable@vger.kernel.org Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NM and SPS FW types that may run on ME device on server platforms do not have valid MEI/HECI interface and driver should not be bound to it as this might lead to system hung. In practice not all BIOSes effectively hide such devices from the OS and in some cases it is not possible. We determine FW type by examining Host FW status registers in order to unbind the driver. In this patch we are adding check for ME on Cougar Point, Lynx Point Devices Cc: stable <stable@vger.kernel.org> # 3.10+ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increase genwqe driver version number. Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When being used in a multithreaded application there were problems with memory pages/cachelines accessed by multiple threads/cpus at the same time, while doing DMA transfers to/from those. To avoid such situations this fix is creating a copy of the first and the last page if it is not fully used. The data is copied from user-space into those pages and results are copied back when the DDCB-request is successfully finished. Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rc is not initialized, so genwqe_finish_queue() either returns -EIO or garbage. Fortunately the return is not being checked by any callers, so this has not yet caused any problems. Even so, it makes sense to fix this small bug in case is is checked in future. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Needed to add wmb() before we send the DDCB for execution. Without the syncronizing it failed on System p. Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>