linux.git/drivers/misc, branch v6.6.18 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git misc: fastrpc: Mark all sessions as invalid in cb_remove 2024-02-23T08:25:04+00:00 Ekansh Gupta quic_ekangupt@quicinc.com 2024-01-08T11:48:33+00:00 e3c4e10e3a7923f1c336759bab033d75d2059fc8 commit a4e61de63e34860c36a71d1a364edba16fb6203b upstream. In remoteproc shutdown sequence, rpmsg_remove will get called which would depopulate all the child nodes that have been created during rpmsg_probe. This would result in cb_remove call for all the context banks for the remoteproc. In cb_remove function, session 0 is getting skipped which is not correct as session 0 will never become available again. Add changes to mark session 0 also as invalid. Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a4e61de63e34860c36a71d1a364edba16fb6203b upstream.

In remoteproc shutdown sequence, rpmsg_remove will get called which
would depopulate all the child nodes that have been created during
rpmsg_probe. This would result in cb_remove call for all the context
banks for the remoteproc. In cb_remove function, session 0 is
getting skipped which is not correct as session 0 will never become
available again. Add changes to mark session 0 also as invalid.

Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback 2024-02-05T20:14:32+00:00 Hans de Goede hdegoede@redhat.com 2023-12-24T18:34:02+00:00 1229ce1c4acd36f5af97c996420defc43daca635 [ Upstream commit b1b9f7a494400c0c39f8cd83de3aaa6111c55087 ] The lis3lv02d_i2c driver was missing a line to set the lis3_dev's reg_ctrl callback. lis3_reg_ctrl(on) is called from the init callback, but due to the missing reg_ctrl callback the regulators where never turned off again leading to the following oops/backtrace when detaching the driver: [ 82.313527] ------------[ cut here ]------------ [ 82.313546] WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put+0x219/0x230 ... [ 82.313695] RIP: 0010:_regulator_put+0x219/0x230 ... [ 82.314767] Call Trace: [ 82.314770] <TASK> [ 82.314772] ? _regulator_put+0x219/0x230 [ 82.314777] ? __warn+0x81/0x170 [ 82.314784] ? _regulator_put+0x219/0x230 [ 82.314791] ? report_bug+0x18d/0x1c0 [ 82.314801] ? handle_bug+0x3c/0x80 [ 82.314806] ? exc_invalid_op+0x13/0x60 [ 82.314812] ? asm_exc_invalid_op+0x16/0x20 [ 82.314845] ? _regulator_put+0x219/0x230 [ 82.314857] regulator_bulk_free+0x39/0x60 [ 82.314865] i2c_device_remove+0x22/0xb0 Add the missing setting of the callback so that the regulators properly get turned off again when not used. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231224183402.95640-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b1b9f7a494400c0c39f8cd83de3aaa6111c55087 ]

The lis3lv02d_i2c driver was missing a line to set the lis3_dev's
reg_ctrl callback.

lis3_reg_ctrl(on) is called from the init callback, but due to
the missing reg_ctrl callback the regulators where never turned off
again leading to the following oops/backtrace when detaching the driver:

[   82.313527] ------------[ cut here ]------------
[   82.313546] WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put+0x219/0x230
...
[   82.313695] RIP: 0010:_regulator_put+0x219/0x230
...
[   82.314767] Call Trace:
[   82.314770]  <TASK>
[   82.314772]  ? _regulator_put+0x219/0x230
[   82.314777]  ? __warn+0x81/0x170
[   82.314784]  ? _regulator_put+0x219/0x230
[   82.314791]  ? report_bug+0x18d/0x1c0
[   82.314801]  ? handle_bug+0x3c/0x80
[   82.314806]  ? exc_invalid_op+0x13/0x60
[   82.314812]  ? asm_exc_invalid_op+0x16/0x20
[   82.314845]  ? _regulator_put+0x219/0x230
[   82.314857]  regulator_bulk_free+0x39/0x60
[   82.314865]  i2c_device_remove+0x22/0xb0

Add the missing setting of the callback so that the regulators
properly get turned off again when not used.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231224183402.95640-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write 2023-12-13T17:45:29+00:00 Su Hui suhui@nfschina.com 2023-11-20T09:55:26+00:00 f78fff4648bb0a797359dac69792463efd22bb00 [ Upstream commit ee6236027218f8531916f1c5caa5dc330379f287 ] Clang static analyzer complains that value stored to 'rets' is never read.Let 'buf_len = -EOVERFLOW' to make sure we can return '-EOVERFLOW'. Fixes: 8c8d964ce90f ("mei: move hbuf_depth from the mei device to the hw modules") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231120095523.178385-2-suhui@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ee6236027218f8531916f1c5caa5dc330379f287 ]

Clang static analyzer complains that value stored to 'rets' is never
read.Let 'buf_len = -EOVERFLOW' to make sure we can return '-EOVERFLOW'.

Fixes: 8c8d964ce90f ("mei: move hbuf_depth from the mei device to the hw modules")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120095523.178385-2-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
misc: mei: client.c: return negative error code in mei_cl_write 2023-12-13T17:45:29+00:00 Su Hui suhui@nfschina.com 2023-11-20T09:55:23+00:00 e2365ead012a811755c4e3c02a95c70b89b38e56 [ Upstream commit 8f06aee8089cf42fd99a20184501bd1347ce61b9 ] mei_msg_hdr_init() return negative error code, rets should be 'PTR_ERR(mei_hdr)' rather than '-PTR_ERR(mei_hdr)'. Fixes: 0cd7c01a60f8 ("mei: add support for mei extended header.") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231120095523.178385-1-suhui@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8f06aee8089cf42fd99a20184501bd1347ce61b9 ]

mei_msg_hdr_init() return negative error code, rets should be
'PTR_ERR(mei_hdr)' rather than '-PTR_ERR(mei_hdr)'.

Fixes: 0cd7c01a60f8 ("mei: add support for mei extended header.")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120095523.178385-1-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller 2023-11-28T17:19:44+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2023-10-18T08:56:31+00:00 f22145b55283cea2096a3c91614668354380820f [ Upstream commit 6c4b39937f4e65688ea294725ae432b2565821ff ] Add Renesas R8A779F0 in pci_device_id table so that pci-epf-test can be used for testing PCIe EP on R-Car S4-8. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-16-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6c4b39937f4e65688ea294725ae432b2565821ff ]

Add Renesas R8A779F0 in pci_device_id table so that pci-epf-test
can be used for testing PCIe EP on R-Car S4-8.

Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-16-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
misc: st_core: Do not call kfree_skb() under spin_lock_irqsave() 2023-11-20T10:59:26+00:00 Jinjie Ruan ruanjinjie@huawei.com 2023-08-23T03:50:20+00:00 d2ab1ff309c2b7931b7e60b00ef08837de081b12 [ Upstream commit 4d08c3d12b61022501989f9f071514d2d6f77c47 ] It is not allowed to call kfree_skb() from hardware interrupt context or with hardware interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile tested only. Fixes: 53618cc1e51e ("Staging: sources for ST core") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230823035020.1281892-1-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4d08c3d12b61022501989f9f071514d2d6f77c47 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.

Fixes: 53618cc1e51e ("Staging: sources for ST core")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230823035020.1281892-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support 2023-11-08T10:56:24+00:00 Siddharth Vadapalli s-vadapalli@ti.com 2023-10-20T12:02:48+00:00 be3e3ab567b77fbf49e61fc7cea2fff84540de97 commit 8293703a492ae97c86af27c75b76e6239ec86483 upstream. Add DEVICE_ID for J721S2 and enable support for endpoints configured with this DEVICE_ID in the pci_endpoint_test driver. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Cc: stable <stable@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231020120248.3168406-1-s-vadapalli@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8293703a492ae97c86af27c75b76e6239ec86483 upstream.

Add DEVICE_ID for J721S2 and enable support for endpoints configured
with this DEVICE_ID in the pci_endpoint_test driver.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231020120248.3168406-1-s-vadapalli@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: fastrpc: Unmap only if buffer is unmapped from DSP 2023-10-16T18:58:50+00:00 Ekansh Gupta quic_ekangupt@quicinc.com 2023-10-13T12:20:07+00:00 509143385db364c67556a914bef6c9a42fd2c74c For unmapping any buffer from kernel, it should first be unmapped from DSP. In case unmap from DSP request fails, the map should not be removed from kernel as it might lead to SMMU faults and other memory issues. Fixes: 5c1b97c7d7b7 ("misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013122007.174464-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
For unmapping any buffer from kernel, it should first be unmapped
from DSP. In case unmap from DSP request fails, the map should not
be removed from kernel as it might lead to SMMU faults and other
memory issues.

Fixes: 5c1b97c7d7b7 ("misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013122007.174464-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: fastrpc: Clean buffers on remote invocation failures 2023-10-16T18:58:50+00:00 Ekansh Gupta quic_ekangupt@quicinc.com 2023-10-13T12:20:06+00:00 1c8093591d1e372d700fe65423e7315a8ecf721b With current design, buffers and dma handles are not freed in case of remote invocation failures returned from DSP. This could result in buffer leakings and dma handle pointing to wrong memory in the fastrpc kernel. Adding changes to clean buffers and dma handles even when remote invocation to DSP returns failures. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013122007.174464-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
With current design, buffers and dma handles are not freed in case
of remote invocation failures returned from DSP. This could result
in buffer leakings and dma handle pointing to wrong memory in the
fastrpc kernel. Adding changes to clean buffers and dma handles
even when remote invocation to DSP returns failures.

Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013122007.174464-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
misc: fastrpc: Free DMA handles for RPC calls with no arguments 2023-10-16T18:58:49+00:00 Ekansh Gupta quic_ekangupt@quicinc.com 2023-10-13T12:20:05+00:00 206484303892a2a36c0c3414030ddfef658a4e70 The FDs for DMA handles to be freed is updated in fdlist by DSP over a remote call. This holds true even for remote calls with no arguments. To handle this, get_args and put_args are needed to be called for remote calls with no arguments also as fdlist is allocated in get_args and FDs updated in fdlist is freed in put_args. Fixes: 8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013122007.174464-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The FDs for DMA handles to be freed is updated in fdlist by DSP over
a remote call. This holds true even for remote calls with no
arguments. To handle this, get_args and put_args are needed to
be called for remote calls with no arguments also as fdlist
is allocated in get_args and FDs updated in fdlist is freed
in put_args.

Fixes: 8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013122007.174464-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>