<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/mtd, branch v3.15</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>Merge tag 'for-linus-20140507' of git://git.infradead.org/linux-mtd</title>
<updated>2014-05-07T23:28:52+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2014-05-07T23:28:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=9f1eb57dc706b98bd775d613570f157b6d888c35'/>
<id>9f1eb57dc706b98bd775d613570f157b6d888c35</id>
<content type='text'>
Pull MTD fix from Brian Norris:
 "A single update for Keystone SoC's, whose NAND controller does not
  support subpage programming"

* tag 'for-linus-20140507' of git://git.infradead.org/linux-mtd:
  mtd: davinci-nand: disable subpage write for keystone-nand
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull MTD fix from Brian Norris:
 "A single update for Keystone SoC's, whose NAND controller does not
  support subpage programming"

* tag 'for-linus-20140507' of git://git.infradead.org/linux-mtd:
  mtd: davinci-nand: disable subpage write for keystone-nand
</pre>
</div>
</content>
</entry>
<entry>
<title>UBI: avoid workqueue format string leak</title>
<updated>2014-05-05T06:31:33+00:00</updated>
<author>
<name>Kees Cook</name>
<email>keescook@chromium.org</email>
</author>
<published>2014-04-08T04:44:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=bebfef150e0b8fa68704cddacf05b8c26462d565'/>
<id>bebfef150e0b8fa68704cddacf05b8c26462d565</id>
<content type='text'>
When building the name for the workqueue thread, make sure a format
string cannot leak in from the disk name.

Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
Signed-off-by: Artem Bityutskiy &lt;artem.bityutskiy@linux.intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When building the name for the workqueue thread, make sure a format
string cannot leak in from the disk name.

Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
Signed-off-by: Artem Bityutskiy &lt;artem.bityutskiy@linux.intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>UBI: fix ubi free PEBs count calculation</title>
<updated>2014-05-05T06:31:33+00:00</updated>
<author>
<name>Tanya Brokhman</name>
<email>tlinder@codeaurora.org</email>
</author>
<published>2014-04-01T08:02:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=3d21bb7667c4b57a15077d60d23385d9a1c01d08'/>
<id>3d21bb7667c4b57a15077d60d23385d9a1c01d08</id>
<content type='text'>
The ubi-&gt;free_count should be updated with every insert/remove to/from
the ubi-&gt;free list.

Signed-off-by: Tanya Brokhman &lt;tlinder@codeaurora.org&gt;
Reviewed-by: Dolev Raviv &lt;draviv@codeaurora.org&gt;
Acked-by: Richard Weinberger &lt;richard@nod.at&gt;
Signed-off-by: Artem Bityutskiy &lt;artem.bityutskiy@linux.intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The ubi-&gt;free_count should be updated with every insert/remove to/from
the ubi-&gt;free list.

Signed-off-by: Tanya Brokhman &lt;tlinder@codeaurora.org&gt;
Reviewed-by: Dolev Raviv &lt;draviv@codeaurora.org&gt;
Acked-by: Richard Weinberger &lt;richard@nod.at&gt;
Signed-off-by: Artem Bityutskiy &lt;artem.bityutskiy@linux.intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>UBI: fix error path in __wl_get_peb</title>
<updated>2014-05-05T06:31:33+00:00</updated>
<author>
<name>Tanya Brokhman</name>
<email>tlinder@codeaurora.org</email>
</author>
<published>2014-04-01T08:01:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=87ed89d21ede38f86be9419ca7c6dd4761764bbb'/>
<id>87ed89d21ede38f86be9419ca7c6dd4761764bbb</id>
<content type='text'>
In case of an error (if there are not free PEB's for example),
__wl_get_peb will return a negative value. In order to prevent access
violation we need to test the returned value prior to using it later on.

Signed-off-by: Tatyana Brokhman &lt;tlinder@codeaurora.org&gt;
Reviewed-by: Dolev Raviv &lt;draviv@codeaurora.org&gt;
Acked-by: Richard Weinberger &lt;richard@nod.at&gt;
Signed-off-by: Artem Bityutskiy &lt;artem.bityutskiy@linux.intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In case of an error (if there are not free PEB's for example),
__wl_get_peb will return a negative value. In order to prevent access
violation we need to test the returned value prior to using it later on.

Signed-off-by: Tatyana Brokhman &lt;tlinder@codeaurora.org&gt;
Reviewed-by: Dolev Raviv &lt;draviv@codeaurora.org&gt;
Acked-by: Richard Weinberger &lt;richard@nod.at&gt;
Signed-off-by: Artem Bityutskiy &lt;artem.bityutskiy@linux.intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mtd: davinci-nand: disable subpage write for keystone-nand</title>
<updated>2014-04-30T22:26:49+00:00</updated>
<author>
<name>Murali Karicheri</name>
<email>m-karicheri2@ti.com</email>
</author>
<published>2014-03-20T20:08:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=28c015a9daabe4ed3aeb0ccf669a3f1c2b8b81d5'/>
<id>28c015a9daabe4ed3aeb0ccf669a3f1c2b8b81d5</id>
<content type='text'>
Sub page write doesn't work because of hw issue in controller found on
Keystone SOCs. AEMIF controller is also used on DaVinci SOCs which
don't seems to have any issue. So add "ti,keysone-nand" compatible
to nand driver in order to set NAND_NO_SUBPAGE_WRITE option.

Cc: Warner Losh &lt;imp@bsdimp.com&gt;
Signed-off-by: Murali Karicheri &lt;m-karicheri2@ti.com&gt;
Signed-off-by: Ivan Khoronzhuk &lt;ivan.khoronzhuk@ti.com&gt;
Acked-by: Santosh Shilimkar &lt;santosh.shilimkar@ti.com&gt;
Signed-off-by: Brian Norris &lt;computersforpeace@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Sub page write doesn't work because of hw issue in controller found on
Keystone SOCs. AEMIF controller is also used on DaVinci SOCs which
don't seems to have any issue. So add "ti,keysone-nand" compatible
to nand driver in order to set NAND_NO_SUBPAGE_WRITE option.

Cc: Warner Losh &lt;imp@bsdimp.com&gt;
Signed-off-by: Murali Karicheri &lt;m-karicheri2@ti.com&gt;
Signed-off-by: Ivan Khoronzhuk &lt;ivan.khoronzhuk@ti.com&gt;
Acked-by: Santosh Shilimkar &lt;santosh.shilimkar@ti.com&gt;
Signed-off-by: Brian Norris &lt;computersforpeace@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Shiraz has moved</title>
<updated>2014-04-18T23:40:08+00:00</updated>
<author>
<name>Viresh Kumar</name>
<email>viresh.kumar@linaro.org</email>
</author>
<published>2014-04-18T22:07:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=9cc236827fde5e254fd995a0023c05c5ee3a3ba6'/>
<id>9cc236827fde5e254fd995a0023c05c5ee3a3ba6</id>
<content type='text'>
shiraz.hashim@st.com email-id doesn't exist anymore as he has left the
company.  Replace ST's id with shiraz.linux.kernel@gmail.com.

It also updates .mailmap file to fix address for 'git shortlog'.

Signed-off-by: Viresh Kumar &lt;viresh.kumar@linaro.org&gt;
Cc: Shiraz Hashim &lt;shiraz.linux.kernel@gmail.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
shiraz.hashim@st.com email-id doesn't exist anymore as he has left the
company.  Replace ST's id with shiraz.linux.kernel@gmail.com.

It also updates .mailmap file to fix address for 'git shortlog'.

Signed-off-by: Viresh Kumar &lt;viresh.kumar@linaro.org&gt;
Cc: Shiraz Hashim &lt;shiraz.linux.kernel@gmail.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd</title>
<updated>2014-04-07T17:17:30+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2014-04-07T17:17:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=c29aa153ef0469cddf0146d41ce6494bd76be78b'/>
<id>c29aa153ef0469cddf0146d41ce6494bd76be78b</id>
<content type='text'>
Pull MTD updates from Brian Norris:
 - A few SPI NOR ID definitions
 - Kill the NAND "max pagesize" restriction
 - Fix some x16 bus-width NAND support
 - Add NAND JEDEC parameter page support
 - DT bindings for NAND ECC
 - GPMI NAND updates (subpage reads)
 - More OMAP NAND refactoring
 - New STMicro SPI NOR driver (now in 40 patches!)
 - A few other random bugfixes

* tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits)
  Fix index regression in nand_read_subpage
  mtd: diskonchip: mem resource name is not optional
  mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH
  mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
  mtd: omap2: Use devm_ioremap_resource()
  mtd: denali_dt: Use devm_ioremap_resource()
  mtd: devices: elm: update DRIVER_NAME as "omap-elm"
  mtd: devices: elm: configure parallel channels based on ecc_steps
  mtd: devices: elm: clean elm_load_syndrome
  mtd: devices: elm: check for hardware engine's design constraints
  mtd: st_spi_fsm: Succinctly reorganise .remove()
  mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU
  mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M"
  mtd: st_spi_fsm: Avoid duplicating MTD core code
  mtd: st_spi_fsm: Remove useless consts from function arguments
  mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions
  mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct
  mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull MTD updates from Brian Norris:
 - A few SPI NOR ID definitions
 - Kill the NAND "max pagesize" restriction
 - Fix some x16 bus-width NAND support
 - Add NAND JEDEC parameter page support
 - DT bindings for NAND ECC
 - GPMI NAND updates (subpage reads)
 - More OMAP NAND refactoring
 - New STMicro SPI NOR driver (now in 40 patches!)
 - A few other random bugfixes

* tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits)
  Fix index regression in nand_read_subpage
  mtd: diskonchip: mem resource name is not optional
  mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH
  mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
  mtd: omap2: Use devm_ioremap_resource()
  mtd: denali_dt: Use devm_ioremap_resource()
  mtd: devices: elm: update DRIVER_NAME as "omap-elm"
  mtd: devices: elm: configure parallel channels based on ecc_steps
  mtd: devices: elm: clean elm_load_syndrome
  mtd: devices: elm: check for hardware engine's design constraints
  mtd: st_spi_fsm: Succinctly reorganise .remove()
  mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU
  mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M"
  mtd: st_spi_fsm: Avoid duplicating MTD core code
  mtd: st_spi_fsm: Remove useless consts from function arguments
  mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions
  mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct
  mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc</title>
<updated>2014-04-05T22:37:40+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2014-04-05T22:37:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=cbda94e039c3862326a65d1d0506447af8330c3c'/>
<id>cbda94e039c3862326a65d1d0506447af8330c3c</id>
<content type='text'>
Pull ARM SoC driver changes from Arnd Bergmann:
 "These changes are mostly for ARM specific device drivers that either
  don't have an upstream maintainer, or that had the maintainer ask us
  to pick up the changes to avoid conflicts.

  A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
  shmobile), aside from that, reset controllers for STi as well as a
  large rework of the Marvell Orion/EBU watchdog driver are notable"

* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
  Revert "net: stmmac: Add SOCFPGA glue driver"
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
  ARM: STi: Add reset controller support to mach-sti Kconfig
  drivers: reset: stih416: add softreset controller
  drivers: reset: stih415: add softreset controller
  drivers: reset: Reset controller driver for STiH416
  drivers: reset: Reset controller driver for STiH415
  drivers: reset: STi SoC system configuration reset controller support
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  reset: Add optional resets and stubs
  ARM: shmobile: r7s72100: fix bus clock calculation
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
  drivers: cci: Export CCI PMU revision
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ARM SoC driver changes from Arnd Bergmann:
 "These changes are mostly for ARM specific device drivers that either
  don't have an upstream maintainer, or that had the maintainer ask us
  to pick up the changes to avoid conflicts.

  A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
  shmobile), aside from that, reset controllers for STi as well as a
  large rework of the Marvell Orion/EBU watchdog driver are notable"

* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
  Revert "net: stmmac: Add SOCFPGA glue driver"
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
  ARM: STi: Add reset controller support to mach-sti Kconfig
  drivers: reset: stih416: add softreset controller
  drivers: reset: stih415: add softreset controller
  drivers: reset: Reset controller driver for STiH416
  drivers: reset: Reset controller driver for STiH415
  drivers: reset: STi SoC system configuration reset controller support
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  reset: Add optional resets and stubs
  ARM: shmobile: r7s72100: fix bus clock calculation
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
  drivers: cci: Export CCI PMU revision
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Fix index regression in nand_read_subpage</title>
<updated>2014-04-05T06:13:17+00:00</updated>
<author>
<name>Ron</name>
<email>ron@debian.org</email>
</author>
<published>2014-03-15T17:31:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=4a4163caccae97a23d97c29032664ee7b7a498d0'/>
<id>4a4163caccae97a23d97c29032664ee7b7a498d0</id>
<content type='text'>
Commit 7351d3a5dbf42ba3299af71db3296be447bc1516 added an index variable
as part of fixing checkpatch warnings, presumably as a tool to make some
long lines shorter, however it only set that index in the case of there
being no gaps in eccpos for the fragment being read.  Which means the
later step of filling ecccode from oob_poi will use the wrong indexing
into eccpos in that case.

This patch restores the behaviour that existed prior to that change.

Signed-off-by: Ron Lee &lt;ron@debian.org&gt;
Signed-off-by: Brian Norris &lt;computersforpeace@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Commit 7351d3a5dbf42ba3299af71db3296be447bc1516 added an index variable
as part of fixing checkpatch warnings, presumably as a tool to make some
long lines shorter, however it only set that index in the case of there
being no gaps in eccpos for the fragment being read.  Which means the
later step of filling ecccode from oob_poi will use the wrong indexing
into eccpos in that case.

This patch restores the behaviour that existed prior to that change.

Signed-off-by: Ron Lee &lt;ron@debian.org&gt;
Signed-off-by: Brian Norris &lt;computersforpeace@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'upstream-3.15-rc1' of git://git.infradead.org/linux-ubifs</title>
<updated>2014-04-04T22:35:38+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2014-04-04T22:35:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=370d2662d569f22ac3d598cd4475617cd910c759'/>
<id>370d2662d569f22ac3d598cd4475617cd910c759</id>
<content type='text'>
Pull ubifs updates from Artem Bityutskiy:
 "This pull request includes the 'ubiblock' driver which provides R/O
  block access to UBI volumes.  It is useful for those who want to use
  squashfs on top of raw flash devices.  UBI will provide bit-flip
  handling and wear-levelling in this case (e.g., if there are other UBI
  volumes with R/W UBIFS too).

  The driver is actually pretty small and it is part of the UBI kernel
  subsystem.  Delivered by Ezequiel Garcia, along with a piece of
  documentation on the MTD web site and the user-space tool for creating
  and removing block devices"

* tag 'upstream-3.15-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: block: Remove __initdata from ubiblock_param_ops
  UBI: make UBI_IOCVOLCRBLK take a parameter for future usage
  UBI: rename block device ioctls
  UBI: block: Use ENOSYS as return value when CONFIG_UBIBLOCK=n
  UBI: block: Add CONFIG_BLOCK dependency
  UBI: block: Use 'u64' for the 64-bit dividend
  UBI: block: Mark init-only symbol as __initdata
  UBI: block: do not use term "attach"
  UBI: R/O block driver on top of UBI volumes
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ubifs updates from Artem Bityutskiy:
 "This pull request includes the 'ubiblock' driver which provides R/O
  block access to UBI volumes.  It is useful for those who want to use
  squashfs on top of raw flash devices.  UBI will provide bit-flip
  handling and wear-levelling in this case (e.g., if there are other UBI
  volumes with R/W UBIFS too).

  The driver is actually pretty small and it is part of the UBI kernel
  subsystem.  Delivered by Ezequiel Garcia, along with a piece of
  documentation on the MTD web site and the user-space tool for creating
  and removing block devices"

* tag 'upstream-3.15-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: block: Remove __initdata from ubiblock_param_ops
  UBI: make UBI_IOCVOLCRBLK take a parameter for future usage
  UBI: rename block device ioctls
  UBI: block: Use ENOSYS as return value when CONFIG_UBIBLOCK=n
  UBI: block: Add CONFIG_BLOCK dependency
  UBI: block: Use 'u64' for the 64-bit dividend
  UBI: block: Mark init-only symbol as __initdata
  UBI: block: do not use term "attach"
  UBI: R/O block driver on top of UBI volumes
</pre>
</div>
</content>
</entry>
</feed>
