linux.git/drivers/net/Kconfig, branch v2.6.35-rc4 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git net: add dependency on fw class module to qlcnic and netxen_nic 2010-06-23T18:49:42+00:00 Anirban Chakraborty anirban.chakraborty@qlogic.com 2010-06-23T18:49:42+00:00 06aeb78b85d8c04af03eb37353aa0df98d3db170 netxen_nic and qlcnic driver depends on firmware_class module. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
netxen_nic and qlcnic driver depends on firmware_class module.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev: bfin_mac: add support for IEEE 1588 PTP 2010-05-18T00:19:40+00:00 Barry Song barry.song@analog.com 2010-05-18T00:19:40+00:00 fe92afedee23e1d91f0133360a24d2bf48270739 Newer on-chip MAC peripherals support IEEE 1588 PTP in the hardware, so extend the driver to support this functionality. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
Newer on-chip MAC peripherals support IEEE 1588 PTP in the hardware, so
extend the driver to support this functionality.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
forcedeth: Kill NAPI config options. 2010-05-04T06:33:05+00:00 David S. Miller davem@davemloft.net 2010-05-04T06:33:05+00:00 0a12761bcd5646691c5d16dd93df84d1b8849285 All distributions enable it, therefore no significant body of users are even testing the driver with it disabled. And making NAPI configurable is heavily discouraged anyways. I left the MSI-X interrupt enabling thing in an "#if 0" block so hopefully someone can debug that and it can get re-enabled. Probably it was just one of the NVIDIA chipset MSI erratas that we work handle these days in the PCI quirks (see drivers/pci/quirks.c and stuff like nvenet_msi_disable()). Signed-off-by: David S. Miller <davem@davemloft.net> 
All distributions enable it, therefore no significant body of users
are even testing the driver with it disabled.  And making NAPI
configurable is heavily discouraged anyways.

I left the MSI-X interrupt enabling thing in an "#if 0" block
so hopefully someone can debug that and it can get re-enabled.
Probably it was just one of the NVIDIA chipset MSI erratas that
we work handle these days in the PCI quirks (see drivers/pci/quirks.c
and stuff like nvenet_msi_disable()).

Signed-off-by: David S. Miller <davem@davemloft.net>
Add non-Virtex5 support for LL TEMAC driver 2010-04-13T08:33:44+00:00 John Linn john.linn@xilinx.com 2010-04-08T07:08:02+00:00 e44171f115de3dedf34064646206deb91549865f This patch adds support for using the LL TEMAC Ethernet driver on non-Virtex 5 platforms by adding support for accessing the Soft DMA registers as if they were memory mapped instead of solely through the DCR's (available on the Virtex 5). The patch also updates the driver so that it runs on the MicroBlaze. The changes were tested on the PowerPC 440, PowerPC 405, and the MicroBlaze platforms. Signed-off-by: John Tyner <jtyner@cs.ucr.edu> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch adds support for using the LL TEMAC Ethernet driver on
non-Virtex 5 platforms by adding support for accessing the Soft DMA
registers as if they were memory mapped instead of solely through the
DCR's (available on the Virtex 5).

The patch also updates the driver so that it runs on the MicroBlaze.
The changes were tested on the PowerPC 440, PowerPC 405, and the
MicroBlaze platforms.

Signed-off-by: John Tyner <jtyner@cs.ucr.edu>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert "Add non-Virtex5 support for LL TEMAC driver" 2010-04-08T06:28:28+00:00 David S. Miller davem@davemloft.net 2010-04-08T06:28:28+00:00 4d8dc679084d8dd7b81b2ae245844246deb0759c This reverts commit 459569145516f7967b916c57445feb02c600668c. Uses virt_to_bus() and breaks the build. Signed-off-by: David S. Miller <davem@davemloft.net> 
This reverts commit 459569145516f7967b916c57445feb02c600668c.

Uses virt_to_bus() and breaks the build.

Signed-off-by: David S. Miller <davem@davemloft.net>
au1000-eth: allow driver to be compiled as a module 2010-04-07T09:07:47+00:00 Florian Fainelli florian@openwrt.org 2010-04-06T22:08:53+00:00 b233fc6b10e66d7d58ab56c7897b82e64c13b68d This patch allows the au1000-eth driver to be compiled as a module. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch allows the au1000-eth driver to be compiled as a module.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-04-07T06:53:30+00:00 David S. Miller davem@davemloft.net 2010-04-07T06:53:30+00:00 4a35ecf8bf1c4b039503fa554100fe85c761de76 Conflicts: drivers/net/bonding/bond_main.c drivers/net/via-velocity.c drivers/net/wireless/iwlwifi/iwl-agn.c 
Conflicts:
	drivers/net/bonding/bond_main.c
	drivers/net/via-velocity.c
	drivers/net/wireless/iwlwifi/iwl-agn.c
Add non-Virtex5 support for LL TEMAC driver 2010-04-07T02:50:19+00:00 John Linn john.linn@xilinx.com 2010-04-06T11:43:28+00:00 459569145516f7967b916c57445feb02c600668c This patch adds support for using the LL TEMAC Ethernet driver on non-Virtex 5 platforms by adding support for accessing the Soft DMA registers as if they were memory mapped instead of solely through the DCR's (available on the Virtex 5). The patch also updates the driver so that it runs on the MicroBlaze. The changes were tested on the PowerPC 440, PowerPC 405, and the MicroBlaze platforms. Signed-off-by: John Tyner <jtyner@cs.ucr.edu> Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch adds support for using the LL TEMAC Ethernet driver on
non-Virtex 5 platforms by adding support for accessing the Soft DMA
registers as if they were memory mapped instead of solely through the
DCR's (available on the Virtex 5).

The patch also updates the driver so that it runs on the MicroBlaze.
The changes were tested on the PowerPC 440, PowerPC 405, and the
MicroBlaze platforms.

Signed-off-by: John Tyner <jtyner@cs.ucr.edu>
Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp: Split pppol2tp patch into separate l2tp and ppp parts 2010-04-03T21:56:02+00:00 James Chapman jchapman@katalix.com 2010-04-02T06:18:33+00:00 fd558d186df2c13a22455373858bae634a4795af This patch splits the pppol2tp driver into separate L2TP and PPP parts to prepare for L2TPv3 support. In L2TPv3, protocols other than PPP can be carried, so this split creates a common L2TP core that will handle the common L2TP bits which protocol support modules such as PPP will use. Note that the existing pppol2tp module is split into l2tp_core and l2tp_ppp by this change. There are no feature changes here. Internally, however, there are significant changes, mostly to handle the separation of PPP-specific data from the L2TP session and to provide hooks in the core for modules like PPP to access. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
This patch splits the pppol2tp driver into separate L2TP and PPP parts
to prepare for L2TPv3 support. In L2TPv3, protocols other than PPP can
be carried, so this split creates a common L2TP core that will handle
the common L2TP bits which protocol support modules such as PPP will
use.

Note that the existing pppol2tp module is split into l2tp_core and
l2tp_ppp by this change.

There are no feature changes here. Internally, however, there are
significant changes, mostly to handle the separation of PPP-specific
data from the L2TP session and to provide hooks in the core for
modules like PPP to access.

Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev/fec.c: add phylib supporting to enable carrier detection (v2) 2010-04-02T02:53:13+00:00 Bryan Wu bryan.wu@canonical.com 2010-03-31T02:10:44+00:00 e6b043d512fa8d9a3801bf5d72bfa3b8fc3b3cc8 BugLink: http://bugs.launchpad.net/bugs/457878 v2: - remove duplicated phy_speed caculation - fix the phy_speed caculation according to the DataSheet v1: - removed old MII phy control code - add phylib supporting - add ethtool interface to make user space NetworkManager works Tested on Freescale i.MX51 Babbage board. This patch is based on a patch from Frederic Rodo <fred.rodo@gmail.com> Cc: Frederic Rodo <fred.rodo@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Amit Kucheria <amit.kucheria@canonical.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> 
BugLink: http://bugs.launchpad.net/bugs/457878

v2:
 - remove duplicated phy_speed caculation
 - fix the phy_speed caculation according to the DataSheet

v1:
 - removed old MII phy control code
 - add phylib supporting
 - add ethtool interface to make user space NetworkManager works

Tested on Freescale i.MX51 Babbage board.

This patch is based on a patch from Frederic Rodo <fred.rodo@gmail.com>

Cc: Frederic Rodo <fred.rodo@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Amit Kucheria <amit.kucheria@canonical.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>