<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/net/can/usb, branch v5.3.2</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net</title>
<updated>2019-08-07T00:11:59+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-08-07T00:11:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=33920f1ec5bf47c5c0a1d2113989bdd9dfb3fae9'/>
<id>33920f1ec5bf47c5c0a1d2113989bdd9dfb3fae9</id>
<content type='text'>
Pull networking fixes from David Miller:
 "Yeah I should have sent a pull request last week, so there is a lot
  more here than usual:

   1) Fix memory leak in ebtables compat code, from Wenwen Wang.

   2) Several kTLS bug fixes from Jakub Kicinski (circular close on
      disconnect etc.)

   3) Force slave speed check on link state recovery in bonding 802.3ad
      mode, from Thomas Falcon.

   4) Clear RX descriptor bits before assigning buffers to them in
      stmmac, from Jose Abreu.

   5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
      loops, from Nishka Dasgupta.

   6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.

   7) Need to hold sock across skb-&gt;destructor invocation, from Cong
      Wang.

   8) IP header length needs to be validated in ipip tunnel xmit, from
      Haishuang Yan.

   9) Use after free in ip6 tunnel driver, also from Haishuang Yan.

  10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
      Heiner Kallweit.

  11) Upon bridge device init failure, we need to delete the local fdb.
      From Nikolay Aleksandrov.

  12) Handle erros from of_get_mac_address() properly in stmmac, from
      Martin Blumenstingl.

  13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
      Kadlecsik.

  14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
      some devices, so revert. From Johannes Berg.

  15) Fix deadlock in rxrpc, from David Howells.

  16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
      Haibing.

  17) Fix mvpp2 crash on module removal, from Matteo Croce.

  18) Fix race in genphy_update_link, from Heiner Kallweit.

  19) bpf_xdp_adjust_head() stopped working with generic XDP when we
      fixes generic XDP to support stacked devices properly, fix from
      Jesper Dangaard Brouer.

  20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
      David Ahern.

  21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
  net: dsa: sja1105: Fix memory leak on meta state machine error path
  net: dsa: sja1105: Fix memory leak on meta state machine normal path
  net: dsa: sja1105: Really fix panic on unregistering PTP clock
  net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
  net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
  net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
  net: sched: sample: allow accessing psample_group with rtnl
  net: sched: police: allow accessing police-&gt;params with rtnl
  net: hisilicon: Fix dma_map_single failed on arm64
  net: hisilicon: fix hip04-xmit never return TX_BUSY
  net: hisilicon: make hip04_tx_reclaim non-reentrant
  tc-testing: updated vlan action tests with batch create/delete
  net sched: update vlan action for batched events operations
  net: stmmac: tc: Do not return a fragment entry
  net: stmmac: Fix issues when number of Queues &gt;= 4
  net: stmmac: xgmac: Fix XGMAC selftests
  be2net: disable bh with spin_lock in be_process_mcc
  net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
  net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
  net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull networking fixes from David Miller:
 "Yeah I should have sent a pull request last week, so there is a lot
  more here than usual:

   1) Fix memory leak in ebtables compat code, from Wenwen Wang.

   2) Several kTLS bug fixes from Jakub Kicinski (circular close on
      disconnect etc.)

   3) Force slave speed check on link state recovery in bonding 802.3ad
      mode, from Thomas Falcon.

   4) Clear RX descriptor bits before assigning buffers to them in
      stmmac, from Jose Abreu.

   5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
      loops, from Nishka Dasgupta.

   6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.

   7) Need to hold sock across skb-&gt;destructor invocation, from Cong
      Wang.

   8) IP header length needs to be validated in ipip tunnel xmit, from
      Haishuang Yan.

   9) Use after free in ip6 tunnel driver, also from Haishuang Yan.

  10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
      Heiner Kallweit.

  11) Upon bridge device init failure, we need to delete the local fdb.
      From Nikolay Aleksandrov.

  12) Handle erros from of_get_mac_address() properly in stmmac, from
      Martin Blumenstingl.

  13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
      Kadlecsik.

  14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
      some devices, so revert. From Johannes Berg.

  15) Fix deadlock in rxrpc, from David Howells.

  16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
      Haibing.

  17) Fix mvpp2 crash on module removal, from Matteo Croce.

  18) Fix race in genphy_update_link, from Heiner Kallweit.

  19) bpf_xdp_adjust_head() stopped working with generic XDP when we
      fixes generic XDP to support stacked devices properly, fix from
      Jesper Dangaard Brouer.

  20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
      David Ahern.

  21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
  net: dsa: sja1105: Fix memory leak on meta state machine error path
  net: dsa: sja1105: Fix memory leak on meta state machine normal path
  net: dsa: sja1105: Really fix panic on unregistering PTP clock
  net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
  net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
  net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
  net: sched: sample: allow accessing psample_group with rtnl
  net: sched: police: allow accessing police-&gt;params with rtnl
  net: hisilicon: Fix dma_map_single failed on arm64
  net: hisilicon: fix hip04-xmit never return TX_BUSY
  net: hisilicon: make hip04_tx_reclaim non-reentrant
  tc-testing: updated vlan action tests with batch create/delete
  net sched: update vlan action for batched events operations
  net: stmmac: tc: Do not return a fragment entry
  net: stmmac: Fix issues when number of Queues &gt;= 4
  net: stmmac: xgmac: Fix XGMAC selftests
  be2net: disable bh with spin_lock in be_process_mcc
  net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
  net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
  net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices</title>
<updated>2019-08-02T11:58:01+00:00</updated>
<author>
<name>Tomas Bortoli</name>
<email>tomasbortoli@gmail.com</email>
</author>
<published>2019-07-31T14:54:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=ead16e53c2f0ed946d82d4037c630e2f60f4ab69'/>
<id>ead16e53c2f0ed946d82d4037c630e2f60f4ab69</id>
<content type='text'>
Uninitialized Kernel memory can leak to USB devices.

Fix by using kzalloc() instead of kmalloc() on the affected buffers.

Signed-off-by: Tomas Bortoli &lt;tomasbortoli@gmail.com&gt;
Reported-by: syzbot+d6a5a1a3657b596ef132@syzkaller.appspotmail.com
Fixes: f14e22435a27 ("net: can: peak_usb: Do not do dma on the stack")
Cc: linux-stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Uninitialized Kernel memory can leak to USB devices.

Fix by using kzalloc() instead of kmalloc() on the affected buffers.

Signed-off-by: Tomas Bortoli &lt;tomasbortoli@gmail.com&gt;
Reported-by: syzbot+d6a5a1a3657b596ef132@syzkaller.appspotmail.com
Fixes: f14e22435a27 ("net: can: peak_usb: Do not do dma on the stack")
Cc: linux-stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>can: peak_usb: pcan_usb_fd: Fix info-leaks to USB devices</title>
<updated>2019-08-02T11:57:48+00:00</updated>
<author>
<name>Tomas Bortoli</name>
<email>tomasbortoli@gmail.com</email>
</author>
<published>2019-07-31T14:54:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=30a8beeb3042f49d0537b7050fd21b490166a3d9'/>
<id>30a8beeb3042f49d0537b7050fd21b490166a3d9</id>
<content type='text'>
Uninitialized Kernel memory can leak to USB devices.

Fix by using kzalloc() instead of kmalloc() on the affected buffers.

Signed-off-by: Tomas Bortoli &lt;tomasbortoli@gmail.com&gt;
Reported-by: syzbot+513e4d0985298538bf9b@syzkaller.appspotmail.com
Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Cc: linux-stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Uninitialized Kernel memory can leak to USB devices.

Fix by using kzalloc() instead of kmalloc() on the affected buffers.

Signed-off-by: Tomas Bortoli &lt;tomasbortoli@gmail.com&gt;
Reported-by: syzbot+513e4d0985298538bf9b@syzkaller.appspotmail.com
Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Cc: linux-stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>can: peak_usb: force the string buffer NULL-terminated</title>
<updated>2019-08-02T11:27:30+00:00</updated>
<author>
<name>Wang Xiayang</name>
<email>xywang.sjtu@sjtu.edu.cn</email>
</author>
<published>2019-07-31T07:25:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=e787f19373b8a5fa24087800ed78314fd17b984a'/>
<id>e787f19373b8a5fa24087800ed78314fd17b984a</id>
<content type='text'>
strncpy() does not ensure NULL-termination when the input string size
equals to the destination buffer size IFNAMSIZ. The output string is
passed to dev_info() which relies on the NULL-termination.

Use strlcpy() instead.

This issue is identified by a Coccinelle script.

Signed-off-by: Wang Xiayang &lt;xywang.sjtu@sjtu.edu.cn&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
strncpy() does not ensure NULL-termination when the input string size
equals to the destination buffer size IFNAMSIZ. The output string is
passed to dev_info() which relies on the NULL-termination.

Use strlcpy() instead.

This issue is identified by a Coccinelle script.

Signed-off-by: Wang Xiayang &lt;xywang.sjtu@sjtu.edu.cn&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>can: mark expected switch fall-throughs</title>
<updated>2019-07-26T01:09:42+00:00</updated>
<author>
<name>Gustavo A. R. Silva</name>
<email>gustavo@embeddedor.com</email>
</author>
<published>2019-01-29T17:59:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=5a8dadbcfa6b04ea3be6f0ffa04eba173c865378'/>
<id>5a8dadbcfa6b04ea3be6f0ffa04eba173c865378</id>
<content type='text'>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warnings:

drivers/net/can/peak_canfd/peak_pciefd_main.c:668:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/spi/mcp251x.c:875:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/at91_can.c:895:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/at91_can.c:953:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/usb/peak_usb/pcan_usb.c: In function ‘pcan_usb_decode_error’:
drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (n &amp; PCAN_USB_ERROR_BUS_LIGHT) {
      ^
drivers/net/can/usb/peak_usb/pcan_usb.c:428:2: note: here
  case CAN_STATE_ERROR_WARNING:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.

Notice that in some cases spelling mistakes were fixed.
In other cases, the /* fall through */ comment is placed
at the bottom of the case statement, which is what GCC
is expecting to find.

Signed-off-by: Gustavo A. R. Silva &lt;gustavo@embeddedor.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warnings:

drivers/net/can/peak_canfd/peak_pciefd_main.c:668:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/spi/mcp251x.c:875:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/at91_can.c:895:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/at91_can.c:953:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/net/can/usb/peak_usb/pcan_usb.c: In function ‘pcan_usb_decode_error’:
drivers/net/can/usb/peak_usb/pcan_usb.c:422:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (n &amp; PCAN_USB_ERROR_BUS_LIGHT) {
      ^
drivers/net/can/usb/peak_usb/pcan_usb.c:428:2: note: here
  case CAN_STATE_ERROR_WARNING:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.

Notice that in some cases spelling mistakes were fixed.
In other cases, the /* fall through */ comment is placed
at the bottom of the case statement, which is what GCC
is expecting to find.

Signed-off-by: Gustavo A. R. Silva &lt;gustavo@embeddedor.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>can: peak_usb: fix potential double kfree_skb()</title>
<updated>2019-07-24T09:16:31+00:00</updated>
<author>
<name>Stephane Grosjean</name>
<email>s.grosjean@peak-system.com</email>
</author>
<published>2019-07-05T13:32:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=fee6a8923ae0d318a7f7950c6c6c28a96cea099b'/>
<id>fee6a8923ae0d318a7f7950c6c6c28a96cea099b</id>
<content type='text'>
When closing the CAN device while tx skbs are inflight, echo skb could
be released twice. By calling close_candev() before unlinking all
pending tx urbs, then the internal echo_skb[] array is fully and
correctly cleared before the USB write callback and, therefore,
can_get_echo_skb() are called, for each aborted URB.

Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: Stephane Grosjean &lt;s.grosjean@peak-system.com&gt;
Cc: linux-stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When closing the CAN device while tx skbs are inflight, echo skb could
be released twice. By calling close_candev() before unlinking all
pending tx urbs, then the internal echo_skb[] array is fully and
correctly cleared before the USB write callback and, therefore,
can_get_echo_skb() are called, for each aborted URB.

Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: Stephane Grosjean &lt;s.grosjean@peak-system.com&gt;
Cc: linux-stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net</title>
<updated>2019-06-17T22:55:34+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-06-17T22:55:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=da0f382029868806e88c046eb2560fdee7a9457c'/>
<id>da0f382029868806e88c046eb2560fdee7a9457c</id>
<content type='text'>
Pull networking fixes from David Miller:
 "Lots of bug fixes here:

   1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.

   2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
      Crispin.

   3) Use after free in psock backlog workqueue, from John Fastabend.

   4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
      Salem.

   5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.

   6) Network header needs to be set for packet redirect in nfp, from
      John Hurley.

   7) Fix udp zerocopy refcnt, from Willem de Bruijn.

   8) Don't assume linear buffers in vxlan and geneve error handlers,
      from Stefano Brivio.

   9) Fix TOS matching in mlxsw, from Jiri Pirko.

  10) More SCTP cookie memory leak fixes, from Neil Horman.

  11) Fix VLAN filtering in rtl8366, from Linus Walluij.

  12) Various TCP SACK payload size and fragmentation memory limit fixes
      from Eric Dumazet.

  13) Use after free in pneigh_get_next(), also from Eric Dumazet.

  14) LAPB control block leak fix from Jeremy Sowden"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
  lapb: fixed leak of control-blocks.
  tipc: purge deferredq list for each grp member in tipc_group_delete
  ax25: fix inconsistent lock state in ax25_destroy_timer
  neigh: fix use-after-free read in pneigh_get_next
  tcp: fix compile error if !CONFIG_SYSCTL
  hv_sock: Suppress bogus "may be used uninitialized" warnings
  be2net: Fix number of Rx queues used for flow hashing
  net: handle 802.1P vlan 0 packets properly
  tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
  tcp: add tcp_min_snd_mss sysctl
  tcp: tcp_fragment() should apply sane memory limits
  tcp: limit payload size of sacked skbs
  Revert "net: phylink: set the autoneg state in phylink_phy_change"
  bpf: fix nested bpf tracepoints with per-cpu data
  bpf: Fix out of bounds memory access in bpf_sk_storage
  vsock/virtio: set SOCK_DONE on peer shutdown
  net: dsa: rtl8366: Fix up VLAN filtering
  net: phylink: set the autoneg state in phylink_phy_change
  net: add high_order_alloc_disable sysctl/static key
  tcp: add tcp_tx_skb_cache sysctl
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull networking fixes from David Miller:
 "Lots of bug fixes here:

   1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.

   2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
      Crispin.

   3) Use after free in psock backlog workqueue, from John Fastabend.

   4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
      Salem.

   5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.

   6) Network header needs to be set for packet redirect in nfp, from
      John Hurley.

   7) Fix udp zerocopy refcnt, from Willem de Bruijn.

   8) Don't assume linear buffers in vxlan and geneve error handlers,
      from Stefano Brivio.

   9) Fix TOS matching in mlxsw, from Jiri Pirko.

  10) More SCTP cookie memory leak fixes, from Neil Horman.

  11) Fix VLAN filtering in rtl8366, from Linus Walluij.

  12) Various TCP SACK payload size and fragmentation memory limit fixes
      from Eric Dumazet.

  13) Use after free in pneigh_get_next(), also from Eric Dumazet.

  14) LAPB control block leak fix from Jeremy Sowden"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
  lapb: fixed leak of control-blocks.
  tipc: purge deferredq list for each grp member in tipc_group_delete
  ax25: fix inconsistent lock state in ax25_destroy_timer
  neigh: fix use-after-free read in pneigh_get_next
  tcp: fix compile error if !CONFIG_SYSCTL
  hv_sock: Suppress bogus "may be used uninitialized" warnings
  be2net: Fix number of Rx queues used for flow hashing
  net: handle 802.1P vlan 0 packets properly
  tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
  tcp: add tcp_min_snd_mss sysctl
  tcp: tcp_fragment() should apply sane memory limits
  tcp: limit payload size of sacked skbs
  Revert "net: phylink: set the autoneg state in phylink_phy_change"
  bpf: fix nested bpf tracepoints with per-cpu data
  bpf: Fix out of bounds memory access in bpf_sk_storage
  vsock/virtio: set SOCK_DONE on peer shutdown
  net: dsa: rtl8366: Fix up VLAN filtering
  net: phylink: set the autoneg state in phylink_phy_change
  net: add high_order_alloc_disable sysctl/static key
  tcp: add tcp_tx_skb_cache sysctl
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>can: usb: Kconfig: Remove duplicate menu entry</title>
<updated>2019-06-07T21:03:53+00:00</updated>
<author>
<name>Alexander Dahl</name>
<email>ada@thorsis.com</email>
</author>
<published>2019-01-22T13:55:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=0ed89d777dd6ed3110f1c64c898f84b4ce685e57'/>
<id>0ed89d777dd6ed3110f1c64c898f84b4ce685e57</id>
<content type='text'>
This seems to have slipped in by accident when sorting the entries.

Fixes: ffbdd9172ee2f53020f763574b4cdad8d9760a4f
Signed-off-by: Alexander Dahl &lt;ada@thorsis.com&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This seems to have slipped in by accident when sorting the entries.

Fixes: ffbdd9172ee2f53020f763574b4cdad8d9760a4f
Signed-off-by: Alexander Dahl &lt;ada@thorsis.com&gt;
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 412</title>
<updated>2019-06-05T15:37:14+00:00</updated>
<author>
<name>Thomas Gleixner</name>
<email>tglx@linutronix.de</email>
</author>
<published>2019-06-01T08:08:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=4d8bc5106988ce98c579d51e4fdbacba37e15185'/>
<id>4d8bc5106988ce98c579d51e4fdbacba37e15185</id>
<content type='text'>
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license this program
  is distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Allison Randal &lt;allison@lohutok.net&gt;
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190112.858563475@linutronix.de
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license this program
  is distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Allison Randal &lt;allison@lohutok.net&gt;
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190112.858563475@linutronix.de
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285</title>
<updated>2019-06-05T15:36:37+00:00</updated>
<author>
<name>Thomas Gleixner</name>
<email>tglx@linutronix.de</email>
</author>
<published>2019-05-29T14:17:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=8e8e69d67e5fad1a1edf97acebd649a6c8f1febd'/>
<id>8e8e69d67e5fad1a1edf97acebd649a6c8f1febd</id>
<content type='text'>
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license this program
  is distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 100 file(s).

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Alexios Zavras &lt;alexios.zavras@intel.com&gt;
Reviewed-by: Allison Randal &lt;allison@lohutok.net&gt;
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license this program
  is distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 100 file(s).

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Alexios Zavras &lt;alexios.zavras@intel.com&gt;
Reviewed-by: Allison Randal &lt;allison@lohutok.net&gt;
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
