linux.git/drivers/net/fec.c, branch v2.6.35-rc4

net/fec: fix pm to survive to suspend/resume

2010-06-02T13:13:34+00:00

* in the actual driver, calling fec_stop and fec_enet_init doesn't
allow to have a working network interface at resume (where a
ifconfig down and up is required to recover the interface)
* by using fec_enet_close and fec_enet_open, this patch solves this
problem and handle the case where the link changed between suspend
and resume
* this patch also disable clock at suspend and reenable it at resume

Signed-off-by: Eric Bénard 
Signed-off-by: David S. Miller

netdev/fec: fix ifconfig eth0 down hang issue

2010-05-28T10:40:39+00:00

BugLink: http://bugs.launchpad.net/bugs/559065

In fec open/close function, we need to use phy_connect and phy_disconnect
operation before we start/stop phy. Otherwise it will cause system hang.

Only call fec_enet_mii_probe() in open function, because the first open
action will cause NULL pointer error.

Signed-off-by: Bryan Wu 
Signed-off-by: David S. Miller

fec: add support for PHY interface platform data

2010-05-24T07:36:13+00:00

The i.MX25 PDK uses RMII to communicate with its PHY. This patch adds
the ability to configure RMII, based on platform data.

Signed-off-by: Baruch Siach 
Acked-by:  Greg Ungerer 
Signed-off-by: David S. Miller

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

2010-05-12T07:05:35+00:00

Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/wireless/ath/ar9170/usb.c
	drivers/scsi/iscsi_tcp.c
	net/ipv4/ipmr.c

net: trans_start cleanups

2010-05-10T12:01:31+00:00

Now that core network takes care of trans_start updates, dont do it
in drivers themselves, if possible. Drivers can avoid one cache miss
(on dev->trans_start) in their start_xmit() handler.

Exceptions are NETIF_F_LLTX drivers

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

FEC: Fix kernel panic in fec_set_mac_address.

2010-05-05T07:55:48+00:00

Fix memory corruption that sometimes result in kernel panic.

Signed-off-by: Mattias Walström 
Signed-off-by: David S. Miller

net: convert multicast list to list_head

2010-04-03T21:22:15+00:00

Converts the list and the core manipulating with it to be the same as uc_list.

+uses two functions for adding/removing mc address (normal and "global"
 variant) instead of a function parameter.
+removes dev_mcast.c completely.
+exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for
 manipulation with lists on a sandbox (used in bonding and 80211 drivers)

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

netdev/fec.c: add phylib supporting to enable carrier detection (v2)

2010-04-02T02:53:13+00:00

BugLink: http://bugs.launchpad.net/bugs/457878

v2:
 - remove duplicated phy_speed caculation
 - fix the phy_speed caculation according to the DataSheet

v1:
 - removed old MII phy control code
 - add phylib supporting
 - add ethtool interface to make user space NetworkManager works

Tested on Freescale i.MX51 Babbage board.

This patch is based on a patch from Frederic Rodo 

Cc: Frederic Rodo 
Signed-off-by: Bryan Wu 
Acked-by: Amit Kucheria 
Acked-by: Sascha Hauer 
Signed-off-by: David S. Miller

net: convert multiple drivers to use netdev_for_each_mc_addr, part4

2010-02-22T23:45:52+00:00

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller

net: use netdev_mc_count and netdev_mc_empty when appropriate

2010-02-12T19:38:58+00:00

This patch replaces dev->mc_count in all drivers (hopefully I didn't miss
anything). Used spatch and did small tweaks and conding style changes when
it was suitable.

Jirka

Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller