linux.git/drivers/net/irda, branch v2.6.22-rc4

[IrDA]: KingSun/DonShine USB IrDA dongle support.

2007-05-11T06:46:13+00:00

This dongle does not follow the usb-irda specification, so it needs its
own special driver. In addition, it uses interrupt endpoints instead of
bulk ones as the rest of USB IrDA dongles supported by Linux (just to be
different?) and data reads need to be parsed to extract the valid bytes
before being unwrapped (details in the comment at the start of the
source). No speed commands have been discovered for this dongle, and I
suspect it does not have any at all.

On plugin, this dongle reports vendor and device IDs: 0x07c0:0x4200 .

The Windows driver that is used normally to control this dongle has a
filename of DSIR620.SYS .

Signed-off-by: Alex Villac�s Lasso 
Signed-off-by: Samuel Ortiz 
Signed-off-by: David S. Miller

Fix misspellings collected by members of KJ list.

2007-05-09T05:14:03+00:00

Fix the misspellings of "propogate", "writting" and (oh, the shame
:-) "kenrel" in the source tree.

Signed-off-by: Robert P. J. Day 
Signed-off-by: Adrian Bunk

smsc-ircc2: add PNP support

2007-05-08T18:15:23+00:00

Claim devices using PNP, unless the user explicitly specified device
addresses.  This can be disabled with the "smsc-ircc2.nopnp" option.

This removes the need for probing legacy addresses and helps untangle IR
devices from serial8250 devices.

Sometimes the SMC device is at a legacy COM port address but does not use the
legacy COM IRQ.  In this case, claiming the device using PNP rather than 8250
legacy probe means we can automatically use the correct IRQ rather than
forcing the user to use "setserial" to set the IRQ manually.

If the PNP claim doesn't work, make sure you don't have a setserial init
script, e.g., /etc/init.d/setserial, configured to poke in legacy COM port
resources for the IRDA device.  That causes the serial driver to claim
resources needed by this driver.

Based on this patch by Ville Syrjälä:
    http://www.hpl.hp.com/personal/Jean_Tourrilhes/IrDA/ir260_smsc_pnp.diff

Signed-off-by: Bjorn Helgaas 
Cc: Keith Owens 
Cc: Len Brown 
Cc: Adam Belay 
Cc: Matthieu CASTET 
Cc: Jean Tourrilhes 
Cc: Matthew Garrett 
Cc: Ville Syrjala 
Cc: Russell King 
Acked-by: Samuel Ortiz 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

smsc-ircc2: tidy up module parameter checking

2007-05-08T18:15:23+00:00

To determine whether the user specified a module parameter, use some #defines
instead of checking for bare magic numbers.

Signed-off-by: Bjorn Helgaas 
Cc: Keith Owens 
Cc: Len Brown 
Cc: Adam Belay 
Cc: Matthieu CASTET 
Cc: Jean Tourrilhes 
Cc: Matthew Garrett 
Cc: Ville Syrjala 
Cc: Russell King 
Cc: Samuel Ortiz 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

header cleaning: don't include smp_lock.h when not used

2007-05-08T18:15:07+00:00

Remove includes of  where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

2007-05-06T20:20:10+00:00

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)
  [ARM] Add comments marking in-use ptrace numbers
  [ARM] Move syscall saving out of the way of utrace
  [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro
  [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header
  [ARM] mm 10: allow memory type to be specified with ioremap
  [ARM] mm 9: add additional device memory types
  [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6
  [ARM] iop: add missing parens in macro
  [ARM] mm 7: remove duplicated __ioremap() prototypes
  ARM: OMAP: fix OMAP1 mpuio suspend/resume oops
  ARM: OMAP: MPUIO wake updates
  ARM: OMAP: speed up gpio irq handling
  ARM: OMAP: plat-omap changes for 2430 SDP
  ARM: OMAP: gpio object shrinkage, cleanup
  ARM: OMAP: /sys/kernel/debug/omap_gpio
  ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon
  ARM: OMAP: Enable 24xx GPIO autoidling
  [ARM] 4318/2: DSM-G600 Board Support
  [ARM] 4227/1: minor head.S fixups
  [ARM] 4328/1: Move i.MX UART regs to driver
  ...

[IrDA]: Adding carriage returns to mcs7780 debug statements

2007-04-26T05:29:31+00:00

Signed-off-by: Samuel Ortiz 
Signed-off-by: David S. Miller

[SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}

2007-04-26T05:28:29+00:00

To clearly state the intent of copying to linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.

Signed-off-by: Arnaldo Carvalho de Melo

[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}

2007-04-26T05:28:23+00:00

To clearly state the intent of copying from linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.

Signed-off-by: Arnaldo Carvalho de Melo

[IrDA]: SMC SuperIO Chip LPC47N227 not identified properly

2007-04-26T05:26:25+00:00

SMC SuperIO Chip LPC47N227 used for IrDA is not detected because its device
identification byte can be 0x7A instead of 0x5A.

Patch from Peter Kovar 
Cc: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Samuel Ortiz 
Signed-off-by: David S. Miller